NEO FRESNELED COLOR User manual

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE /
POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR
USER MANUAL / MANUAL DE USUARIO
FRESNELED
COLOR

FRESNELED COLOR
P.
2
1. OVERVIEW
Fresneled Color is a fresnel LED luminaire powered by a
RGBAL 250W LED module with a 90Ra color rendering.
With the addition of Lime LEDs, the fixture enables very
subtle color hues and makes the projection look brighter.
Also, as a result of its advanced color mixing, the unit sports
a virtual color wheel to match the industry’s most popular
filters and has color temperature presets from 2700K to
8000K. Equipped with a motorized zoom that allows a beam
angle variation from 15º to 45º, Fresneled Color adds great
versatility to any fresnel application. Last but not least, the
fixture provides 16-bit dimming with 4 dimming curves,
HSIC color management, adjustable PWM & RDM function,
to remotely manage your devices.
SPECIFICATIONS
Source & Optic
• Light Source: 1 RGBAL 250W LED module
• Color temperature: 2700K-8000K
• LEDs life: 50,000 hours
• Zoom: 15º-45º linear zoom
• Selectable refresh rate: 600Hz, 1200Hz, 2000Hz,
4000Hz, 6000Hz & 25000Hz
Photometric Data
• Luminous Flux:
• 15°: 2817.5 lm
• 45º: 4766.2 lm
• Color rendering:
• 2700K-4500K: >90Ra
• 5600K-8000K: >85Ra
• Flux: 15º: 2200 Lux @ 5M (16 ft.)
• Flux: 45º: 230 Lux @ 5M (16 ft.)
Effects & Functions
• Advanced RGBAL color mixing
• Color temperature presets: 2700K, 3000K, 3200K, 3500K,
4000K, 4200K, 4500K, 5600K, 6000K, 6500K, 7200K & 8000K
• HSIC color management
• 16 color presets to match the industry’s most
popular filters
• Dimmer: Full range 0-100% (16-bit)
• 4 dimming curves
• Strobe effect: 0-20 flashes per second
• 15º-45º Linear zoom
• Adjustable PWM (Pulse Width Modulation) to
work flicker free in any given situation
Control
• DMX channels: 8/10/13/19
• Operational modes: DMX, Static, Master/Slave
& On-board control
• RDM function
Electrical
• Input voltage range: AC100–240V, 50-60Hz
• Power consumption: 230W
Physical
• LED display
• DMX connectors: 4 XLR connectors (XLR-3 In
and Out; XLR-5 In and Out)
• Power supply connectors: PowerCON® In/Out
• Cooling: Forced convection
• Dimensions: 417x286x260 mm. / 16.5x11x10 in.
• Weight: 7.6 Kg. / 16.7 Lbs.
ENGLISH VERSION

FRESNELED COLOR
P.
3
2. SAFETY WARNING
• This product must be installed by a qualified pro-
fessional ONLY.
• All maintenance must be carried out by a qualified
electrician ONLY.
• All minimum distance of 0.5m must be maintained
between the equipment and a combustible surface.
• The product must always be operated in a well
ventilated area.
• DO NOT stare directly into the LED light source.
• Always disconnect the power before carrying out
any maintenance.
• The earth must always be connected to the ground
• Ensure that all parts of the equipment are kept
clean and free of dust.
• A minimum distance of 0.8m must be maintained
between the light and projecting surface.
ENGLISH VERSION

FRESNELED COLOR
P.
4
3. DIMENSIONS

FRESNELED COLOR
P.
5
4. INSTALLATION
The LED fixture can be mounted in a hanging position using
the supporting bracket. The bracket should be secured to the
mounting truss or structure using a standard mounting clamp.
Please note that when hanging the unit a safety cable should
also be used.
Hanging
MOUNTING-
POWER CONNECTIONS
220-240V: 8 UNITS may be connected in series
110-120V: 4 UNITS may be connected in series

FRESNELED COLOR
P.
6
ENGLISH VERSION
5. DISPLAY PANEL OPERATION
MENU: Return to the previous menu
ENTER: Enter the currently selected menu.
UP: Scroll down through the current menu list or decrease the
value of the current function.
DOWN: Scroll up through the current menu list or increase the
value of the current function.
DISPLAY OPERATION
MENU MAP

FRESNELED COLOR
P.
7
ENGLISH VERSION

FRESNELED COLOR
P.
8
ENGLISH VERSION
CONTROL KNOB SWITCH SET UP
• Combine <RED>, <GREEN>, <BLUE>, <AM-
BER>, <LIME> and <ZOOM> to create an in-
finite range of colors (0-255)
• Set the value of the <STROBE> (0-25hz)
• MANUAL MODE: Press ENTER, into control
knob switch set up.
• Press ENTER, choose MODE1, order from left to
right is <DIMMER>, <ZOOM>, <CCT>, choose
MODE2, order from left to right is <DIMMER>,
<ZOOM>, <CCT>, choose MODE3, order from
left to right is <HUE>, <SATURATION>, <INTEN-
SITY>, choose MODE4, order from left to right is
<DIMMER>, <CCT>, <+-GREEN>.
NOTES:
• When using this function, if the MCON menu is set
as MAST, then the fixture will transfer the DIM val-
ues to other fixtures.
• When DMX data is received at the fixture, it will
automatically return to main menu after 2 minutes
of no key operation.
EDIT STATIC COLOR
• Select <ENTER> UP/DOWN from the <PRESET
COLOR> menu to choose different color mixture.
MIX-COLOR SETTING

FRESNELED COLOR
P.
9
ENGLISH VERSION
RUN MODE
• RUN: This menu allows the user to select the op-
erating mode of the fixture. Select DMX for nor-
mal DMX operation or SLAV for slave operation.
DMX 512 SETTINGS
• ADDR: This menu allows the user to select the
startaddressofthefixture.Use<UP>or<DOWN>
keys to select required start address.
PERSONALITY
• Enter the <PERSONALITY> mode to select
DMX mode: <HSIC>, <SSP>, <TOUR>, <TR16>.

FRESNELED COLOR
P.
10
ENGLISH VERSION
SPECIAL SETTINGS
• SET: This menu allows the user to adjust key op-
eration settings for this fixture.
• Select UPLOAD to upload custom programs
from the current MASTER unit to the SLAVE units.
• In order to reset custom modes to default values
select <REST>.
• COLOR: is for activate/unactivate the color cali-
bration functions. When <RGBW> is selected,
RGB=255, 255, 255 the color is displayed as cali-
brated in CALIB. C--RGBW. When <COLOR> is
set <OFF> on RGB=255, 255, 255, the RGB val-
ues are not adjusted and the output is most pow-
erful. When <UC> is selected, the RGB output are
adjusted to a standard preset universal color
which balances fixtures from different generations.
• Select <DIM1>, <DIM2>, <DIM3> or <DIM4>
for different dimming speeds. <DIM4> is the slow-
est dimming speed).
• PERF: this setting allows the user to select the
performance characteristics of the fixture.
• MCON: This function allows the user to select
whether the fixture will send DMX data to other
fixturesduringstand-aloneoperation.The<MAST>
setting allows data to be sent to Other fixtures.
The<SELF>settingisdefaultandwillnotsendDMX
data to other fixtures.
• <PWM_RATE> is PWM reflesh rate bottom, press
UP/DOWN to choose <600Hz>, <1200hz>,
<2000hz>, <4000hz>, <6000hz>, <25000hz>.
NOTE: With reflesh rate increased, gray rate
of dimmer will be reduced, (that means high re-
flesh rate, low gray rate, when its <4000hz>, CV3
is invalid, when its <25000hz>, CV1, CV2, CV3
are invalid, so please lower PWM rate to increase
gray rate innecessary.
• FULL POWER CCT: is the color temperature
choose bottom, press UP/DOWN to choose un-
der full power <3200k>, <4200k>, <5600k>,
<1000k>, can be chosen, when choose
<COLOR>, <3200K>, <4200K>, <5600>,
<10000K> are not work, but choose <NORMAL>.

FRESNELED COLOR
P.
11
ENGLISH VERSION
ACTIVATE THE PASSWORD
• Enter the <KEY> mode to select whether the ac-
cess password is ON or OFF.
• When the fixture is set as PASS <ON>, after 30
seconds or turn on the fixture next time, the fix-
ture will need access password to enter the dis-
play menu control.
NOTES
The factory access password is <UP> + <DOWN> + <UP>
+ <DOWN>, then press <ENTER> to confirm the access.
BALANCE PARAMETERS AND CORRECTION MENU DISPLAY
• Press <MENU> button to enter the password
confirmation, to enter the correct password,
<UP> + <DOWN> + <UP> + <DOWN>. Key
press the <MENU> in, the correct password will
enter show submenu.
• Enter the <CALIB.C> to select white color of dif-
ferent color temperature.
• There are 8000k pre-programmed White colors
that can be edited by using <RED>, <GREEN>,
<BLUE>, <AMBER>, <LIME>.
• Enter the <RGBtoW> to adjust the RGB parame-
ter to make different whites.
• When the new setting is activated, the DMX con-
troller choose RGB=255, 255, 255 the white
color will be made by the actual RGB values on
the <RGBtoW>.
INFO
• Press <ENTER> and go to <INFO> you can check
<VERSION>.

FRESNELED COLOR
P.
12
ENGLISH VERSION
6. USING A DMX512 CONTROLLER
CHANNEL ASSIGNMENT
NOTES:
• This product have two DMX512 channel configura-
tion: <HSCI> / <SSP> / <TOUR>/ <TR16>.

FRESNELED COLOR
P.
13
ENGLISH VERSION

FRESNELED COLOR
P.
14
ENGLISH VERSION

FRESNELED COLOR
P.
15
ENGLISH VERSION

FRESNELED COLOR
P.
16
ENGLISH VERSION

FRESNELED COLOR
P.
17
ENGLISH VERSION

FRESNELED COLOR
P.
18
VERSION ESPAÑOL
1. DESCRIPCIÓN
Fresneled Color es un Fresnel LED que tiene un que tiene
un módulo LED RGBAL de 250W, con un reproducción de
color de 90Ra. Ideal tanto para aplicaciones teatrales como
de broadcasting, el equipo incorpora LEDs lima, logrando
tonalidades muy sutiles y haciendo que la proyección se
destaque más fácilmente gracias a su mayor brillo. Como
resultado de su avanzado sistema de mezcla de color, la
luminaria cuenta con una rueda de color virtual que emu-
la los filtros más populares de la industria, además de po-
seer presets de temperatura color desde los 2700K hasta
los 8000K. Por último, Fresneled Color cuenta con dimmer
de 16-bit con 4 curvas de dimmeo, manejo de color HSIC,
PWM ajustable y función RDM, para poder gestionar y mon-
itorear sus parámetros de forma remota.
ESPECIFICACIONES
Fuente & Óptica
• Fuente de luz: 1 módulo LED RGBAL de 250W
• Temperatura color: 2700K-8000K
• Vida útil promedio: 50.000 horas
• Zoom: 15º-45º lineal
• Frecuencia de refresco seleccionable: 600Hz,
1200Hz, 2000Hz, 4000Hz, 6000Hz & 25000Hz
Datos fotométricos
• Flujo lumínico:
• 15°: 2817,5 lm
• 45º: 4766,2 lm
• Reproducción de color:
• 2700K-4500K: >90Ra
• 5600K-8000K: >85Ra
• Flux: 15º: 2200 Lux @ 5M
• Flux: 45º: 230 Lux @ 5M
Efectos & Funciones
• Mezcla de color RGBLA
• Presets de temperatura color: 2700K, 3000K,
3200K, 3500K, 4000K, 4200K, 4500K, 5600K,
6000K, 6500K, 7200K & 8000K
• Gestión de color HSIC
• 16 presets de color para emular los filtros más pop-
ulares de la industria
• Dimmer: 0-100% (16-Bit)
• 4 curvas de dimmeo
• Efecto estrobo: 0-20 flashes por segundo
• Zoom: 15º-45º lineal
• PWM ajustable para trabajar sin parpadeo en
cualquier situación
Control
• Canales DMX: 8/10/13/19
• Modos de operación: DMX, Estático, Maestro/
Esclavo & control a bordo
• Función RDM
Eléctrico
• Rango de voltaje de entrada: AC100–240V, 50-60Hz
• Consumo de potencia: 230W
Físico
• Display LED
• Conectores DMX: 4 conectores XLR (XLR-3 en-
trada y salida; XLR-5 entrada y salida)
• Conectores de alimentación: PowerCON® de
Entrada/Salida
• Enfriamiento por convección forzada
• Dimensiones: 417x286x260 mm. / 16,5x11x10 pulg.
• Peso: 7,6 Kg. / 16,75 Lbs.

FRESNELED COLOR
P.
19
VERSION ESPAÑOL
• Toda persona involucrada con la instalación, oper-
ación y mantenimiento de este dispositivo debe:
- Estar calificada para la tarea.
- Seguir las instrucciones del manual.
• Instale el equipo a una distancia mínima de 50 cm
de otros objetos para garantizar la buena ventilación.
• Mantenga el equipo alejado de llamas expuestas
o líquidos inflables.
• No mire de forma directa hacia la fuente de luz
cuando el equipo esté encendido. La luz puede
generar convulsiones en las personas fotosen-
sitivas o con epilepsia. Se recomienda tomar estas
precauciones especialmente con el efecto beam.
• Desconecte el equipo del suministro eléctrico an-
tes de realizar cualquier tarea de mantenimiento.
• El equipo cuenta con grado de protección I, por lo
cual debe procurar la conexión a tierra.
• Se recomienda la limpieza regular del equipo para
prolongar su vida útil y optimizar la salida de luz.
Utilice un paño suave que no genere pelusa para
eliminar la acumulación de polvo de las piezas óp-
ticas, el ventilador y el tubo de flujo de aire.
• Mantenga una distancia mínima de 80 cm entre la
unidad y la superficie a proyectar.
2. INSTRUCCIONES DE SEGURIDAD

FRESNELED COLOR
P.
20
VERSION ESPAÑOL
3. DIMENSIONES