NEO ION 132 F User manual

P. 1
- Neo ION 132 F
USER MANUAL / MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE
POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR
ION 132 F
beam moving head powered by the famous
Osram Sirius® HRI 132W lamp

P. 2
Neo ION 132 F -
1. OVERVIEW
English version
ION 132F
Beam moving head powered by the famous Osram
Sirius® HRI 132W lamp
ION 132F is a beam moving head powered by the
famous Osram Sirius® HRI 132W lamp. Thanks to its
excellent optical system quality, this xture will give
its users the possibility of achieving an awesome
power in a true 2º beam angle. The unit sports, as an
innovation over its predecessor the Ion 132B, a frost
lter to succeed in wash applications. The xture has
14 colors + open, interchangeable and bidirectional
rainbow eect, 17 static & indexable gobos and an
8-facet rotating prism. Last but not least - thanks to
its 3 phase motor - Ion 132F is capable of extremely
fast movements.
Source & Optics
• Light Source: Osram Sirius® HRI 132W
• Lamp life: 10,000 hours
• Beam angle: 2°
Photometric data
• Luminous Flux: 6200 lumen, 45500 lux @ 15m
(49 .)
Effects & Functions
• Color wheel: 14 interchangeable dichroic lters
+ open, and bidirectional rainbow eect
• Color bounce
• Static gobo wheel: 17 static & indexable gobos
+ open
• Gobo diameter: Outside 13.8 mm., Inside 6 mm.
• Gobo animation eects & shaking
• 8-facet rotating prism
• Frost Filter
• Motorized focus
• Dimmer: Full range 0-100%
• Strobe eect
Control
• DMX channels: 11/14
• Wireless DMX (optional)
• Advanced RDM function
• Hibernation when lost DMX for preset time
• Indicate temperature info of base, arm and
lamp
• Back-up communicating IC
• RDM read voltage, current, power consump-
tion of lamp
• Soware upgrade via DMX
• Fan speed auto-change according to temper-
ature
Movement
• Pan: 6° / 540°
• Tilt: 265°
• 3 phase motor
• 16-bit resolution
• Auto repositioning
Electrical
• Input voltage range: 100–240V, 50-60Hz
• Power supply: Electronic auto-ranging
• Power consumption: 250W
Physical
• DMX connectors: 2 XLR connectors (XLR-3 In
and Out)
• Power supply connectors: PowerCON® In/Out
• 2.4 inch LCD graphic display
• Dimensions: 299x179x435 mm. / 11.7x7x17 in.
• Weight: 10 Kg. / 22 Lbs.

P. 3
- Neo ION 132 F
English version
Description of the Device
8. Mic
9. Mode/Esc
10. Down button
11. Up button
12. Enter button
13. Display
14. Powercon out
15. Powercon in
16. Fuse holder
17. 3-pin DMX in
18. 3-pin DMX out
1. Project lens
2. Head
3. Arm
4. Base
5. Display
6. Foot stand
7. Operation button

P. 4
Neo ION 132 F -
English version
Colors and Gobos
2Tan
3 CTB
4
Yellow
5 Shallow purple
6 Brown
7Blue green
8 Purple red
9 Grass green
10 UV
11 Megenta
12 Green
13 Orange
14 Blue
15 Red
1 Open Open

P. 5
- Neo ION 132 F
English version
Static gobo wheel

P. 6
Neo ION 132 F -
Before operate this unit, please carefully read this users guide and keep if needed in
future. It’s necessary to respect following rules.
The disposal of the device aer lifecycle could damage the environment, need to take
it to special company for recycling or return to authorized dealer.
The products referred to in this manual conform to the Eur opean Community Direc-
tives and are therefore marked with CE logo.
Keep this device away from children and unauthorized users, the manufacturer will
not take responsibility for the damage due to any disregard of the information provid-
ed in this manual and wrong operation.
Before operate the device, pls make sure the xture is in good housing, ensure pan
and tilt can rotate in its complete range.
Pls make sure minimal 0.5m distance need to kept between the xture to any am-
mable material.
The device can only run with 100-240v voltage, 50/60Hz power, don’t connect to any
other wrong power. Disconnect the device from main power before open the shield or
maintenance.
The device is designed only for indoor usage, pls keep it away from moisture. Do not
expose the device under the sun or directly to any other lighting source.
Never look directly into the projecting lens when the xture is power on, the light may
trigger epileptic seizures in photosensitive persons or persons with epilepsy. Espe-
cially at beam eect, extreme caution and observance of these safety instructions is
mandatory.
Don’t put or install the device on a surface that subject to vibration
or bumps.
English version
2. SAFETY AND MAINTENANCE INFORMATION
Safety info

--0.5m

P. 7
- Neo ION 132 F
English version
Maintenance
Ta=45°C The device is supposed to work in the temperate range -15° C and +45° C, do not use
the device when the temperate exceed this range.
The lens, shield need to be replaced when obviously broken, never use the device
when the shield is not completed closed.
Safety I class device, need to be earth connected.
When the xture is hanged overhead, the safety rope must be xed to the bottom of
the device to the appropriate xing point.
Always carry the device by the handles, do not take the head or arm directly for trans-
portation.
• Operation only allowed to qualied person,
damages due to unprofessional operation or re-
move of any parts inside will not be considered
in warranty service. There are no serviceable
parts inside the device or package, service only
leaves to authorized dealers.
• Never allow the optical components contact
with oil, fat or any other liquid.
• A regular clearance of the device is needed for
long-term usage, this is very helpful to maintain
the lifetime and brightness need to use a so
and lint-free cloth to clean the optical system,
fan and air owing tunnel.

P. 8
Neo ION 132 F -
English version
Replacement of the fuse
Trouble Shooting
Need to replace with same type and rating, which
originally installed in the device.
Step One: Unplug power cable from main power.
Step Two: Unscrew the fuse holder out of the hous-
ing with a screwdriver.
Step Three: Remove the broken fuse and replace
with an exact same type of new fuse.
Step Four: Insert the fuse holder back to the hous-
ing and screw tight and reconnect power.
Problems Possible reasons Checking or solutions
Device not
power up
Powercon or power cable damaged Change a good power cable to try
Faulty power supply Replace new power supply
Pan/Tilt error
or vibrate
Faulty Pan/Tilt PCB Replace PT001 PCB
Faulty opto sensor Replace opto sensor OP001
Cable loosen Check the cable connect to OP001
Lamp o
Temperature protection Check the temperature from menu
Fan not working Check the fan speed info from menu
Faulty Lamp Replace new Lamp
Dimmer and strobe set at 0 Set dimmer and strobe channel at 255
Faulty power supply Replace new power supply
Device not response
to DMX
Faulty communication IC Replace the IC with back-up one in the
display PCB
Faulty display PCB Replace new display PCB
Wrong DMX addressing Check the address and setting
Faulty DMX cable Change to a good DMX cable

P. 9
- Neo ION 132 F
English version
3. INSTALLATION
The device could be either put on a solid and even
Surface, or mounted upside down or sideways like
le picture.
The mounting place must be suicient stable and
be able to support a weight of 10 times of the unit’s
weight. When the xture is hanged, always addi-
tionally secure the device with the safety chain,
fasten the safety rope at a suitable position so that
the maximum fall of the projector will be 20 cm.
How to do mounting installation.
Step two: Install the clamp and bracket on the
bottom of panel, fasten the quick-locks;
Step one: Installation the clamp onto the
bracket;

P. 1 0
Neo ION 132 F -
English version
4. CONTROL MENU
Default setting shadowed. Mark with 1. can be basic
reloaded, 2. be program reloaded, 3. can be private
reloaded.
Step three: Install the whole device onto
appropriate truss and fasten the clamps, tight
the safety rope with the truss or other xing
point at a suitable position that drop down
distance not exceed 20 cm.
Mode Addr XXX DMX address setting
Slav Choose Slave mode
Sequ Alon/Mast Choose Sequence mode
Sund Alon/Mast Choose Sound mode
Lamp
Turn On/
O ON/OFF Turn On the lamp
Automatic ON/OFF Lamp On/o when power on
Temp 80~139ºC, 90ºC Lamp o if temperature continu-
ously over for 5 minutes
Adju CHxx=XXX….. Adjust value of each channels
Info DriT XXXC Temperature of driver
Set
Move
Rest Reset
RPan ON/OFF Pan Reverse
RTilt ON/OFF Tilt Reverse
Degr 630/540 Choose Pan Degree
Enco ON/OFF Encoder wheel on/o
Mode Mod1/Mod2 Choose pan/tilt mode
UI Mic 0~99%,60% Sensitivity of Mic
Sign Close/Hold/Auto/Music Mode when no signal

P. 11
- Neo ION 132 F
English version
Fan Auto Speed /High
Speed Fans mode
Hibe OFF, 01M~99M, 15M Sleeping mode
Back 02~60m 02m Show backlight time
Flip ON/OFF Display 180°reverse
User Use1/Use2 Users mode
Cali Code XXX Password: 050
CHxx XXX Calibrate channel value
Ver X1.0.0 IC Version
load ON/OFF Reload Default
5. DMX CONNECTION AND DMX PROTOCOL
The device is controlled by universal DMX 512 pro-
tocol, DMX address is the start channel used to re-
ceive instructions from the external controller. For
independent control, each xture must be assigned
its unique address control channels. For example,
this device has four channel modes: 10/13, if we set
the mode at standard 13 channels mode, and there
are several models need to be independently con-
trolled, we just simply address rst xture at 1, and
second xture at 11, third one at 21, etc.
If the devices have the same address, they will be-
have synchronically.
DMX addressing is limited, don’t set the address so
high that without enough control channels for the
xtures. Display is ashing when no DMX signal is
received.
This device is equipped with 3-pins DMX in and
out sockets only. Pin 1 = GND | Pin 2 = Signal (-) |
Pin 3 = Signal (+)
The termination is prepared by soldering a 120Ω
resistor between pins 2 and 3.
DMX addressing

P. 12
Neo ION 132 F -
Connection: us DMX cable with 3-pin XLR-plugs
to connect the controller with the xture or one
xture with another.
DMX chart
Channel Name Function Min DMX Max DMX
St Ex
1 1 Pan Pan Coarse 0255
2Pan ne Pan Fine 0255
2 3 Tilt Tilt Coarse 0255
4Tilt ne Tilt Fine 0255
3 5 Movment Speed fastest to Slowest 0255
6Movment Function Normal 015
Movement With Backout 16 31
TBD 32 255
47Shutter
Shutter closed 0 31
No function (shutter open) 32 63
Strobe eect slow to fast 64 95
No function (shutter open) 96 127
Pulse-eect in sequences 128 159
No function (shutter open) 160 191
Random strobe eect slow to
fast
192 223
No function (shutter open) 224 255
English version

P. 13
- Neo ION 132 F
5 8
Dimmer
Pin 2 = Signal (-) Dimmer (Close to Open) 0255
Pin 3 = Signal (+)
6 9 Color
Indexed
Position 1 (Open) 0 2
Position 2 ~ Position 15 344
Indexed With Backout
Position 1 (Open) 45 47
Position 2 ~ Position 15 48 89
Indexed With Bounce
Position 1 90 98
Position 2 ~ Position 15 99 223
Forward Wheel Spin
Stop to fastest 224 239
Reverse Wheel Spin
Stop to fastest 240 255
710 Gobo
Indexed
Position 1 (Open) 0 1
Position 2 ~ Position 18 235
Indexed With Backout
Position 1 (Open) 36 37
Position 2 ~ Position 18 38 71
Indexed With Shake
Position 2 72 80
Position 3 ~ Position 18 81 223
Forward Wheel Spin
Stop to fastest 224 239
Reverse Wheel Spin
Stop to fastest 240 255
811 Prism
Indexed & Indexed With Back-
out
Position 1 (Open) 063
Position 2 64 127
Frost 0->100% 128 255
912 Prism Rot
Forward Spin
Stop to fastest 0127
Reverse Spin
English version

P. 14
Neo ION 132 F -
Stop to fastest 128 255
10 13 Focus Continuous
Focus In to Focus Out 0255
11 14 Control
Normal 07
Reset All 815
Pan&Tilt Reset 16 23
Color Reset 24 31
Gobo Reset 32 39
Shutter Reset 40 47
Other Reset 48 55
Display O 56 63
Display On 64 71
Lamp O 72 79
Lamp On 80 87
Hibernation 88 95
TBD 96 255
6. UNIQUE FEATURES
• Soware upgrade function via DMX cable, if
there is any new rmware for this device come
out, it can be upgraded simply via a soware
upgrade box, no need to change any mechan-
ical parts. The upgrade box is not included in
the package, if need any further assistance pls
just contact authorized dealers.
• Hibernation, the device will enter sleeping
mode if activated aer a period of disconnect-
ing DMX signal to save the power consumption,
and will return immediately as soon as the DMX
signal is sent again.
• Display back-up communication IC, there is
a back-up communication IC installed in the
display PCB, so users could replace at once if
the working one is broken, no need to wait long
time from service.
• Display ip, by press up and down button for
more than 3 seconds, the display will ip auto-
matically, this function is useful to read menu
conveniently when device is hanged.
English version

P. 15
- Neo ION 132 F
7. DIMENSIONS DRAWING
English version

P. 1 6
Neo ION 132 F -
Versión Español
1.DESCRIPCIÓN
ION 132F
Cabezal móvil tipo beam que cuenta con la famosa
lámpara Osram Sirius® HRI de 132W
ION 132F es un cabezal móvil tipo beam que cuenta
con la famosa lámpara Osram Sirius® HRI de 132W.
Gracias a su sistema óptico de excelencia, este
equipo le permitirá lograr una potencia asombro-
sa en un ángulo de haz real de 2º La unidad tiene,
como innovación frente a su predecesor Ion 132B,
la incorporación de un ltro frost, para poder ser
utilizado como un bañador. El equipo cuenta con 14
colores + abierto, un efecto de arcoíris intercambia-
ble y bidireccional, 17 gobos estáticos e indexables
y un prisma rotativo de 8 facetas. El Ion 132F es ul-
tra-compacto y cuenta con movimientos extremada-
mente rápidos gracias a su motor de 3 fases.
Fuente & Óptica
• Fuente de luz: Osram Sirius® HRI 132W
• Vida Lámpara: 10,000 horas
• Ángulo de haz: 2°
Información fotométrica
• Luminous Flux: 6200 lumen, 45500 lux @ 15m
(49 .)
Efectos y Funciones
• Rueda de color: 14 ltros dicroicos intercambia-
bles + abierto & efecto de arcoiris bidireccional
• Rebote de color
• Rueda de gobo estática: 17 gobos estáticos e
indexables + abierto
• Diámetro de gobo: por fuera 13.8 mm, por den-
tro 6 mm.
• Efectos de animación de gobos & movimiento
• Prisma rotativo de 8 caras
• Filtro frost
• Foco motorizado
• Dimmer: Rango completo 0-100%
• Efecto estrobo
Control
• Canales DMX: 11/14
• DMX inalámbrico (opcional)
• Función RDM avanzada
• Indica temperatura de base, brazo & lámpara
• IC de comunicación de respaldo
• Actualización del soware vía DMX
• Velocidad de ventilación cambiable acuerdo a
la temperatura.
Movimiento
• Pan: 6° / 540°
• Tilt: 265°
• Motor de 3 fases
• Resolución de 16-bit
• Reposicionamiento automático
Eléctrico
• Rango de voltaje de entrada: 100–240V, 50-
60Hz
• Alimentación: Rango automático
• Consumo de potencia: 250W
Físico
• Conectores DMX: 2 conectores XLR (XLR-3 de
entrada & salida)
• Conectores de alimentación PowerCON®
Entrada/Salida
• Pantalla LCD de 2.4 pulg
• Dimensiones: 299x179x435 mm. / 11.7x7x17
pulg.
• Peso: 10 Kg. / 22 Lbs.

P. 17
- Neo ION 132 F
Versión Español
Descripción del equipo
8. Micrófono
9. Tecla Mode/Esc
10. Tecla de desplazamiento
hacia abajo
11. Tecla de desplazamiento
hacia arriba
12. Tecla Enter
13. Pantalla LCD
14. Conector Powercon de salida
15. Conector Powercon de
entrada
16. Fusible
17. Entrada DMX de 3 pines
18. Salida DMX de 3 pines
1. Lente
2. Cabezal
3. Brazo
4. Base
5. Pantalla LCD
6. Soporte
7. Teclas de operación

P. 18
Neo ION 132 F -
Colores y Gobos
2 Canela
3CTB (Azul temper-
astura color)
4
Amarillo
5 Púrpura llano
6 Marrón
7Verde azulado
8 Rojo púrpura
9 Verde pasto
10 UV
11 Magenta
12 Verde
13 Naranja
14 Azul
15 Rojo
1 Abierto Abierto
Versión Español

P. 1 9
- Neo ION 132 F
Rueda de gobo estática
Versión Español

P. 2 0
Neo ION 132 F -
Antes de utilizar la unidad, lea atentamente el presente manual y consérvelo para
referencias futuras. Deberá cumplir con todas las espefcicaciones consignadas en el
presente manual.
Si luego de nalizada la vida útil de la unidad, ésta debiera ser desechada, deberá
entregarla a una empresa especializada en su reciclaje o devolverla a un distribuidor
autorizado a n de procurar el cuidado del medioambiente.
Los productos referenciados en el presente manual cumplen con las Directivas de la
Comunidad Europea y por tal motivo exhiben el marcado CE.
Mantenga la unidad alejada de niños y usuarios no autorizados; el fabricante no
asumirá responsabilidad alguna por daños generados al no cumplir con las pautas
indicadas en el presente manual o una ejecución indebida.
Antes de poner en funcionamiento la unidad, asegúrese de que ésta no se ha dañado
como consecuencia de su transporte. Verique que el pan y el tilt pueden rotar en su
rango completo.
Deberá dejar una distancia de por lo menos 50 cm entre el equipo y materiales in-
amables.
La unidad podrá ser utilizada exclusivamente con un rango de voltaje de 100-240v
y una potencia de 50/60Hz. Cumpla con esta pauta. Desconecte la unidad antes de
realizar las tareas de mantenimiento o levantar la tapa.
La unidad ha sido diseñada para su uso en espacios interiores. Mantengala alejada
de condiciones de humedad. No ubique la unidad bajo el sol ni la exponga en forma
directa ante otra fuente de luz.
Nunca mire en forma directa a los lentes de proyección cuando la unidad está encen-
dida. La luz podría generar convulsiones epilèpticas en personas fotosensibles o con
epilepsia. Es fundamental, especialmente con el efecto beam, tener extrema pre-
cauciòn y cumplir con las instrucciones consignadas.
No coloque ni instale la unidad en una supercie expuesta a golpes o vibraciones.
2. SEGURIDAD Y MANTENIMIENTO
Seguridad

--0.5m
Versión Español