NETGEAR PowerLine XWNB5602 User manual

Powerline 500 WiFi Access Point (XWNB5602)
Installation Guide

Support
Thank you for selecting NETGEAR products. 
After installing your device, locate the serial number on the label of your product
and use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR website.
Phone (US only): 1-888-NETGEAR
Phone (Other Countries): 
Visit http://support.netgear.com/general/contact/default.aspx.
NETGEAR recommends that you use only the official NETGEAR support
resources.
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks
and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the
United States and/or other countries. Information is subject to change without
notice. © NETGEAR, Inc. All rights reserved.

1
Contents
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
LED Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Button Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Install the Adapters and Surf the Web with WiFi . . . . . . . . . . . . 6
Install NETGEAR genie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Compatible NETGEAR Powerline Devices . . . . . . . . . . . . . . . 19

NETGEAR recommends
that you do not plug a
Powerline device directly
into a power strip.
2
Package Contents
Ethernet cables (2)
XAV5602
XWN5001

3
Hardware Features
Powerline 500 WiFi Access Point
(XWN5001)
Wireless
LED
Power
LED
Powerline
LED
Power
LED
Powerline
LED
Ethernet
LED
Factory
Reset
button
Ethernet
ports
Security
button
On/Off
switch
Powerline 500 Adapter
(XAV5602)
Ethernet
LED
Security
button
Factory
Reset
button

4
LED Descriptions
The LEDs indicate the status of your Powerline devices.
• When you plug in the Powerline device, the Power LED
lights and turns green.
• The Ethernet LED lights and turns green when you connect
a powered-on Ethernet device to at least one Ethernet port. If the
LED is off, there is no Ethernet connection.
• The Wireless LED lights and turns green when the wireless
radio is on.
• The Powerline LED lights when the Powerline device detects at
least one other compatible Powerline device.
The Pick A Plug feature lets you pick the electrical outlet with the
fastest link rate.
- Green: Link rate > 80 Mbps (Fast)
- Amber: Link rate > 50 and < 80 Mbps (Medium)
- Red: Link rate < 50 Mbps (Slow)

5
Button Descriptions
The buttons on your Powerline devices let you do the following:
• Factory Reset button: Use the Factory Reset button to return your
Powerline device to its default factory settings. Press the Factory
Reset button for 2 seconds, and then release it.
• Power On/Off switch: Use the On/Off switch to turn the device on
and off.
• Security button: The Security button has two functions:
-Secure the Powerline network.
-Automatically connect your wireless client to the XWN5001
WiFi access point.

6
Install the Adapters and Surf the Web with WiFi
1. Secure your Powerline network.
a. Make sure that the Power LED is solid green on each
Powerline device.
b. On the XAV5602 adapter, press its Security button for 2
seconds, and then release the button. The Power LED
blinks green while the adapter is setting up security.
c. Within 2 minutes, go to the XWN5001 access point and
press its Security button for 2 seconds, and then release
the button.
d. After a few seconds, the security is set and the Power LED
turns solid green.

7
The Powerline devices can communicate over the Powerline
network in a secure way.
2. Plug the XAV5602 into a wall outlet near your router or gateway.
3. Connect the XAV5602 through the LAN port with an Ethernet
cable.

8
If you want to share Internet access across your home, make
sure to connect the XAV5602 to your Internet gateway with an
Ethernet cable.