NEUTRIK opticalCON HYBRID MED NKO16M-XP-0 Series Configuration guide

E
CLEANING INSTRUCTION
®
opticalCON HYBRID MED
Cable & Chassis Connector
R
Cable Connector Cleaning
CAUTION:
Laser radiation, do not look directly into beam of light!
Tools: Dust remover (Air in a can)
Dry Cleaner PRIZM* MTP* P/N: 1689
Disconnect both cable ends for safety reasons.
Do not stare into beams or view directly with
optical instruments.
Remove the protection cap.
Small contamination:
Use the dust remover to apply air to the lenses.
Heavy contamination:
Open the protective cap of the dry cleaner and
insert the tip into the connector.
Push the main body to initiate the cleaning of the
connector endface.
Repeat the cleaning process if necessary, then
close the proptective cap.
A
B
C
A
C
D
D
Page 1BDA 598 V1
B
AIR
!

www.neutrik.com
Neutrik AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
Neutrik USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
( )
Neutrik UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
Neutrik Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
Neutrik France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
Neutrik Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
Neutrik Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
Neutrik India Pvt. Ltd. IND T: +91 / 982 05 43 424 F: +91 / 22 26163 540
R
Data subject to change without prior notice. 2020 NEUTRIK . NEUTRIK are registered trademark of NEUTRI AG. ALL RIGHTS RESERVED.
® ®
©
Draft. Nr.: BDA 598 V2 Update: 2020-08-19
I
opticalCON HYBRID MED Cleaning Instruction
Chassis Connector Cleaning
Small contamination:
Use the dust remover to apply air to the lenses.
Heavy contamination:
Remove the transparent adapter from the dry
cleaner and insert the tip into the chassis.
Push the main body to initiate the cleaning of the
connector endface.
Repeat the cleaning process if necessary.
A
B
B
A
AIR
!