Noble House Home Furnishings Chaise User manual

Label Picture Description QTY
A Seat Base 1
B
Right Backrest 1
Assembly Instructions
Caution: You must read this before you proceed
Please look in the seat for hardware packs and legs.
Chaise
Part List
Noble house Home Furnishings LLC Page 1 OF 9

C
Left Backrest 1
D Left Back Cushion 1
E Right Back Cushion 1
F
Metal Leg 5
Label Picture Description QTY
①Allen Key 1
②
Bolt(M6*70mm）9
③
Bolt(M8*25mm) 11
④Spring Washer 20
⑤Washer 20
Hardware
Noble house Home Furnishings LLC Page 2 OF 9

Before
Begining
Assembly:
Assembly Preparation
Noble house Home Furnishings LLC Page 3 OF 9

Assembly Steps
This Chaise has multiple parts and may require about 30 minutes to assemble. To give
you an overview of the Chaise parts, the above picture is to help you put the various
parts into perspective. Please read through the instructions below to familiarise yourself
with the parts and steps before assembly.
Step 1
FRONT FACING
Metal Leg(F)
Seat Base(A)
Right Back
Cushion(E)
Left Back Cushion(D)
Small box
Right
Backrest(B)
F
②
Left Backrest(C)
C
①
③
④
B
D
E
⑤
Noble house Home Furnishings LLC Page 4 OF 9

Step 2
Step 3
Step 4
Open the carton and take out the Small Box, the Left Backrest(C), the Right Backrest(B),
the Left Back Cushion(D) and the Right Back Cushion(E) from the bottom of the Seat
Base(A).
Then open the Small Box to take out the Metal Legs(F) and Hardware.
Align the mounting bracket on the Left side of the Right Backrest(B) with the one on the
right side of Left Backrest(C).
Then slide the Right Backrest(B) downwards pressing gently but firmly downwards until
they lock into position.
Turn the Seat Base(A) on its side on the floor as indicated in the picture.
Put the Left Backrest(C) and Right Backrest(B) on the Seat Base(A) as shown in the
picture and make sure the bottoms are at the same level.
C
B
C
B
C
B
②
Noble house Home Furnishings LLC Page 5 OF 9

Step 5
④
①
②
⑤
Insert the Bolts(②) inside half as
pictured until 8 Bolts each side
are all Bolted in, then you can
tight all the Bolts with Allen
Key(①).
C
B
Noble house Home Furnishings LLC Page 6 OF 9

Step 7
With assistance from your adult partner,place the whole product on a clean, non-marring
surface.
Then attach using Bolts(②), Spring Washers(④) and Washers(⑤) with the Allen Key(①)
Please don't tighten the Bolts all at once, but just insert them half-way, by hand, until all
bolts are in,then tighten all the Bolts with the Allen Key(①).
Note: The bottom of the Seat Base(A),Left Backrest(C) and Right Backrest(B) must
be at the same level before assembly.
Install the 5 Metal Legs(F) onto the bottom of Seat Base(A), align the mounting position
of Metal Leg(F) to the mounting position on each corner of the Seat Base(A), then use
the Allen Key(①) to affix them with Bolts(③),Spring Washers(④), and Washer Rings(⑤).
Step 6
Don't turn the Chaise over
directly, you need to lift the
Chaise up then put it down
gently (in order to make sure
the legs or leg supports are not
damaged by any incorrect
operation.
⑤
④
③
①
A
A
F
F
F
F
Noble house Home Furnishings LLC Page 7 OF 9

With assistance from your adult partner, lift the Chaise up then put it down as indicated
in the picture.
Make sure all of the parts are connected in the right position and are sturdy.
Place the Left Back Cushion(D) and the Right Back Cushion(E) onto the Seat Base(A)
against the Left Backrest(C) and Right Backrest(B) affix with Velcro as indicated in the
picture above.
Make sure all parts are connected and securely locked into position.
Your Chaise is ready for use.
This Chaise can only be used on a flat, level surface.
D
E
B
C
Noble house Home Furnishings LLC Page 8 OF 9

Noble house Home Furnishings LLC Page 9 OF 9