NRS Healthcare M11077 Manual

Product Range
N/A N/A
Product Technical Data Sheet 022
M11077 Nuvo Adjustable Bath Step
Product Descripon & Intended Purpose
The Nuvo Adjustable Bath Step is designed to assist users
transferring into and out of the bath by reducing the step-over
height. It can also provide assistance when using the toilet or sink in
a bathroom environment.
Product Features
 Non slip surface provides grip, even when feet are wet.
 Stackable secons can be removed or added to achieve the
desired height rise.
 Easy to clean plasc moulding.
Technical Specicaon
Dimensions:
 Length: 500mm (19 ½”)
 Width: 395mm (15½”)
 Heights: 55mm (2”), 77mm (3”), 100mm (4”)
 Maximum User Weight: 317kg ( 50st)
Installaon Informaon (Note: for detailed informaon refer to User Instrucons)
 This product requires assembly before use.
 No specialist tools or skills are required to assemble this product.
 Assembly me is led than 5 minutes.
 For stacking instrucons please see user instrucons or visit
http://www.nrs-uk.co.uk/nuvo-adjustable-bath-step.html
Safety Precauons
 Do not exceed max. user weight of 317Kg (50st)
 The maximum step height is 175mm (7”) using 6 step secons (2 packs). Do not stack more than 6 step
secons together.
 Always ensure the boom secon of the step has 4 support pillars inserted in the base.

PTDS 022
M11077 Nuvo Adjustable Bath Step
Product Supplied By:
NRS Healthcare Sherwood House, Cartwright Way, Forest Business Park, Bardon Hill, Coalville,
Leicestershire. LE67 1UB UK
PTDS022/Iss1/03/18
Care & Maintenance
 Check that all support pillars are inserted correctly and any additional sections are securely fitted.
 Inspect the product regularly for signs of wear or damage. Any suspected faults or damage should im-
mediately be reported to the supplier and the product taken out of use.
Accessories / Related Products
M24345: Support Pillars ( Set of 4 )
FAQ’s
 What is the maximum height achievable with the step?
A single pack of steps will oer a rise of 2”, 3” or 4”. Two packs can be stacked together to
achieve a maximum rise of 7”. It is not recommended to stack the steps any higher than this.
Cleaning:
 Clean regularly using a general purpose, neutral detergent and warm water.
 Please check the suitability of the cleaning products before use. Do not use abrasive cleaners or cloths
as these could permanently damage the surface and invalidate any warranty.
 To disinfect, wipe with a dilute bleach soluon and rinse thoroughly with fresh water.
 The product can be autoclaved on cycles up to 80°C.
 Allow the product to dry fully prior to use or storage.