NRS Healthcare M78652 User manual

M78652 - 2in1 Adjustable Width Bed Stick
General Safety Warning
Please ensure these instructions
are fully read and implemented.
Failure to do so may result in
injury to the user. Retain in a safe
place for future reference.
Intended Use
The 2in1 Adjustable Width Bed
Stick provides a stable support to
help clients move themselves to a
sitting position and assist them
getting in and out of bed. This
device is suitable for both divan and
slatted domestic beds and is
suitable for all bed sizes from single
to king-size. The product also
complies with MHRA Guidance -
Safe Use of Bedrails DB2006/06 for
Adults and Children
UI/M78652/03/16/Iss3
User Instructions
Unpacking
This product requires assembly
before use.
No tools are required.
Remove the product from its
packaging; Check for damage.
If you see any, or suspect a
fault, do not assemble the
product; contact your supplier
immediately.
Check all parts are present -
see contents list.
NRS Healthcare,
Sherwood House,
Cartwright Way,
Forest Business Park,
Bardon Hill,
Coalville,
Leicestershire,
LE67 1UB,
United Kingdom.
Tel. Head Office: 0330 100 0098
Tel. Customer Services: 0345 121 8111
Email: [email protected]
www.nrshealthcare.co.uk
This product is part of a range of over 3000 daily living aids available
from NRS Healthcare.
To view the full range, please visit our website:
www.nrshealthcare.co.uk, or request a catalogue using the number
below.
Maximum User Weight

Contents
Description
Qty
Bed stick Handle - Short
1
Bed Stick Handle - Long
1
Extension Tube
2
E - Clip
4
Check the bedrail is in the
correct position and is stable
and secure before use.
Important safety note: There
must be a gap of at least
250mm from the headboard to
the Bed Rail, and the mattress
should rest against the handle
of the grab rail when fitted to
reduce the risk of head/limb
entrapment.
Installation Instructions
1. Assemble the Bed Stick by fitting
the two Extension Tubes into the
Long Bed Stick handle using the
correct holes to suit the bed size -
see diags.1 & 2, and secure with
e-clips.
2. Fit the Short Handle onto the
extension tubes using the
appropriate holes to ensure the
mattress is resting firmly against
the Bed Stick Handle, to prevent
the risk of entrapment. See Diag.3
3. Place the bed stick onto the bed
base with the angle of the handle
pointing away from the user. The
position of the device (which should
ideally be based on a clinical
assessment) should be such that
when placed under the mattress with
the handle fitted, the client (from a
lying position) should be able to reach
the handle without stretching. See
Diag 4. Please also see important
safety note for positioning
instructions.
Safety Precautions
This product complies with
MHRA Guidance - Safe Use of
Bedrails DB2006/06 for Adults
and Children
It is not designed for use with
profiling beds.
Please ensure the user does
not exceed the maximum user
weight 190kg (30 stones).
Ensure the mattress is resting
firmly against the bed rail
handle.
4. Note the Handles can be
reversed if not required on the
opposite side of the bed, see
diagram 5, this also gives
additional stability on divan beds.
Product Maintenance & Cleaning
Clean regularly, wiping down with
a soft cloth and a mild
detergent/disinfectant solution
Do not use abrasive cleaners
This product can be autoclaved
up to 80ºC
Inspect on a regular basis the
stability and rigidity of the product.
Check clips are fitted correctly
and the product is positioned
correctly on the bed.

Extension tube
Adjustment
Holes for Short
Handle
Adjustment
Holes for Long
Handle
Single
Bed
3/4 Bed
Standard
Double
King
Size
DIAG: 1
DIAG: 2
DIAG: 5
DIAG: 3
DIAG: 4
Short Handle
e-clip
Long Handle
Extension
Tubes
e-clip