NUVE NC 23S User manual

NÜVE SANAYİ MALZEMELERİ İMALAT VE TİCARET A.Ş.
NC 23S / NC 32S
BENCH TOP STEAM STERILIZERS
USER’S MANUAL
1984
Z14 K25 246 Rev.No: 13 Rev.Date: 11/ 2017

2
Dear Nüve User,
We would like to take this opportunity to thank you for preferring this Nüve product. Please
read the operating instructions carefully and keep them handy for future reference.
Please detain the packing material until you see that the unit is in good condition and it is
operating properly. If an external or internal damage is observed, contact the transportation
company immediately and report the damage. According to ICC regulations, this responsibility
belongs to the customer.
While you are operating the instrument please;
1. obey all warning labels,
2. do not remove warning labels,
3. do not operate damaged instrument,
4. do not operate instrument with a damaged cable,
5. do not move instrument during operation.
In case of a problem contact your Nüve agent for an authorized service or maintenance.
The validity of the guarantee is subject to compliance with the instructions and precautions
described in this manual.
Nüve reserves the right to improve or change the design of its products without any obligation
to modify previously manufactured products.
Information contained in this document is the property of Nüve. It may not be duplicated or
distributed without our permission.
NÜVE
SANAYİ MALZEMELERİ
İMALAT VE TİCARET A.Ş.
Saracalar Mah. Saracalar Kümeevleri No: 4/2
Akyurt 06750 Ankara
Ankara / TURKEY
Tel : [phone] (pbx)
Fax : [phone]
Sales : [email protected]
Technical Service: [email protected]

3
WARRANTY CERTIFICATE
1. Nüve warrants that the equipment delivered is free from defects in material and
workmanship. This warranty is given for a period of two years. The warranty period begins
from the delivery date.
2. Warranty does not apply to parts normally consumed during operation or general
maintenance or any adjustments described in the operating instructions provided with the
instrument.
3. Nüve does not accept any liability in case where the goods are not used in accordance with
their proper intent.
4. The warranty may not be claimed for damages incurred during the shipment, for damages
resulting from improper handling or use, abuse, fire, liquid spillage, tampering or
unauthorized repairs by any persons, use of defective or incompatible accessories, exposure
to abnormally corrosive conditions, use of the product in non-standard environmental
conditions, including but not limited to failure to meet requirements of ambient
temperature, lubrication, humidity or magnetic field influences, from the defects in
maintenance, negligence, bad functioning of auxiliary equipment, in the case of force
majeure or accident and incorrect power supply.
5. Any injury, loss or damage caused; due to a failure resulting from negligence of the
instructions given in this manual; is beyond the scope of the warranty conditions.

BEFORE OPERATING THE INSTRUMENT THIS MANUAL SHOULD BE READ CAREFULLY.

THE VALIDITY OF THE GUARANTEE IS SUBJECT TO THE OBSERVATION OF THE
INSTRUCTIONS AND PRECAUTIONS DESCRIBED IN THIS MANUAL.
INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF NÜVE. IT MAY
NOT BE DUPLICATED OR DISTRIBUTED WITHOUT PERMISSION.
PLEASE REGISTER ONLINE TO VALIDATE YOUR WARRANTY:
To register your warranty online, please visit our webpage www.nuve.com.tr and fill in the
“Warranty Registration Form”.

4
CONTENT
Page
1. INTRODUCTION ........................................................................................................................6
1.1. USE AND FUNCTION ..........................................................................................................6
2. TECHNICAL SPECIFICATIONS ....................................................................................................7
2.1. TECHNICAL SPECIFICATIONS TABLE...................................................................................7
2.2. ACCESSORIES .....................................................................................................................7
2.2.1. OPTIONAL ACCESSORIES ............................................................................................7
3. PRECAUTIONS AND LIMITATIONS ON USE...............................................................................8
4. SYMBOLS AND LABELS..............................................................................................................9
5. INSTALLATION ..........................................................................................................................9
5.1. ENVIRONMENTAL CONDITIONS ........................................................................................9
5.2. HANDLING AND TRANSPORTATION ................................................................................10
5.3. UNPACKING .....................................................................................................................10
5.4. MAINS SUPPLY.................................................................................................................10
5.5. POSITIONING ...................................................................................................................10
5.6. GENERAL PRESENTATION ................................................................................................11
5.7. CONTROL PANEL..............................................................................................................12
5.8. PRIOR TO OPERATION .....................................................................................................14
5.8.1. CONNECTION TO MAINS ..........................................................................................14
5.8.2. CONNECTION TO WATER SUPPLY ............................................................................14
5.8.3. ATTACHING MICROBIOLOGICAL FILTER...................................................................14
5.8.4. STERILIZATION PROGRAMS......................................................................................14
5.8.5. PACKAGING ..............................................................................................................16
5.8.6. LOADING...................................................................................................................16
5.8.6.1. TEXTILES ............................................................................................................18
5.8.6.2. INSTRUMENTS...................................................................................................18
5.8.6.3. STERILIZATION BAGS.........................................................................................19
6. OPERATING PRINCIPLES .........................................................................................................19
6.1. OPERATION PHASES ........................................................................................................19
6.2. PROGRAMMING ..............................................................................................................20
6.2.1. SPECIAL PROGRAMS.................................................................................................22
6.2.2. TEST PROGRAMS ......................................................................................................22
6.3. COMPLETION OF THE OPERATION ..................................................................................22
6.3.1. UNLOADING AND PRESERVING................................................................................23
7. MENUS....................................................................................................................................23

5
7.1. HELP .................................................................................................................................23
7.2. MEMORY..........................................................................................................................24
7.2.1. EXTERNAL MEMORY (USB STICK) .............................................................................25
7.3. SETTINGS..........................................................................................................................25
7.3.1. PREHEATING.............................................................................................................25
7.3.2. STANDBY...................................................................................................................26
7.3.3. PRINTER....................................................................................................................26
7.3.4. BUZZER .....................................................................................................................26
7.3.5. SETUP........................................................................................................................26
7.3.6. TIME/DATE ...............................................................................................................27
7.3.7. LANGUAGE ...............................................................................................................27
7.3.8. PASSWORD...............................................................................................................27
7.3.9. SMS...........................................................................................................................28
7.3.10. E-MAIL...................................................................................................................29
7.4. C/BAR .............................................................................................................................30
7.5. SERVICE............................................................................................................................30
8. PERIODIC MAINTENANCE AND CLEANING.............................................................................30
8.1. PERIODIC MAINTENANCE ................................................................................................30
8.2. PERIODIC CONTOL……………………………………………………………………………………………………..30
8.3. CLEANING........................................................................................................................32
9. DISPOSAL MANAGEMENT CONCEPT......................................................................................32
10. TROUBLESHOOTING ...........................................................................................................32
10.1. ERROR CODES ..................................................................................................................32
10.2. FUSE REPLACEMENT........................................................................................................34
11. OPTIONS .............................................................................................................................34
AlerText™ GSM MODULE ................................................................................................3411.1.
12. ELECTRICAL CIRCUIT DIAGRAM..........................................................................................36
12.1. NC 23S/32S ELECTRICAL CIRCUIT DIAGRAM ...................................................................36