OAKWORKS Celesta User manual

Clodagh Gemini
Celesta®
OAKWORKS®
Celesta®and Clodagh Gemini
USER MANUAL
www.OAKWORKS.com · 717.235.6807
made in the
with US & imported

© Copyright 2020
OAKWORKS®, Inc.
Printed in U.S.A.
All rights are reserved. No part
of this document may be
photocopied, reproduced or
translated to another language
without prior written consent
of OAKWORKS®, Inc.
OAKWORKS®is a registered
trademark of OAKWORKS®, Inc.
Notice
The information contained within
this document is subject to change
without notice and should not
be construed as a commitment by
OAKWORKS®, Inc.
OAKWORKS®, Inc. encourages
requests for technical specifica-
tions and the like documentation to
ensure accuracy. The appropriate
documentation is available upon
request.
OAKWORKS®, Inc. shall not be
liable for incidental or consequen-
tial damages in connection with or
arising out of the furnishing, per-
formance, or use of this document
and the program material which it
describes.

TABLE OF CONTENTS
Important Safety Instructions
Product Use Description...................................................................................... 1
Symbol Identification ........................................................................................... 1
Important Safety Instructions............................................................................ 1-2
Product Description & Photo
Celesta................................................................................................................ 3
Clodagh Gemini .................................................................................................. 4
Installation
Grounding ........................................................................................................... 5
Under Table Cabinet ........................................................................................... 6
Important Safety Note ......................................................................................... 6
Directions for Use
Table Keyswitch .................................................................................................. 7
Foot Control Operations
Flat Top Tables Only................................................................................... 7
Electric Salon Top Tables Only ................................................................... 8
Adjustable Body Comfort (ABC) Systems Only............................................ 9
Hand Control Operations
Flat Top Tables Only................................................................................. 10
Electric Salon Top Tables Only ................................................................. 11
Adjustable Body Comfort (ABC) Systems Only.......................................... 12
In Cabinet Outlet ............................................................................................... 13
Levelling............................................................................................................ 13
Moving the Table............................................................................................... 14
Table Extender.................................................................................................. 14
Adjustable Body Comfort (ABC) System Use (Option)....................................... 15
QuickLockTM Face Rest: (Accessory Option)...................................................... 16
Arm Rest Installation and Adjustment Instructions............................................. 17
Boiance Shelf Support (Accessory Option)........................................................ 18
Cleaning & Disinfection
Recommended Cleaners/Disinfectants .............................................................. 19
Cleaning Process .............................................................................................. 19
Inspections ................................................................................................................ 20
Warranty Information ................................................................................................. 20
Model Number & Serial Number
Product Label Location...................................................................................... 21
Specifications
Permissible Environmental Conditions............................................................... 22
Electrical Specifications..................................................................................... 22
Dimensions ....................................................................................................... 22
Contact Information ...................................................................................... back cover

1
PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS
This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an elec-
trical shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective
Earth (Ground) Terminal.
This symbol, when used in this manual or on product labels, indicates the date of
manufacture of the device.
This symbol, when used in this manual or on product labels, indicates alternating
current (AC).
This symbol, when used in this manual or on product labels, indicates direct current
(DC).
This symbol is used to indicate that the operator should consult the user manual.
This symbol indicates that when the end-user wishes to discard this product, it must
be sent to separate collection facilities for recovery and recycling.
UL 2601-1
CSA C22.2NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R
UL 2601-1
CSA C22.2NO.601.1
IEC 60601-2(2001-09)
CCUSUS
LL
II
SS
TT
EE
DD
R
~
----
PRODUCT USE DESCRIPTION
The product is a cord connected spa/massage table for commercial use. It is intended for indoor use.
Maximum weight capacity of 500 lbs.
The product is intended to be used by trained professionals in a controlled environment. A review
of the following Safety Instructions is important for the safety of the operator and patient. Read all
instructions and understand this entire user manual before using the product. There are no known
contraindications to the use of this equipment.
The table should not be used in any other manner than that described within this manual. Use of any
unnecessary force or unauthorized procedures could result in injury to practitioner, client or equip-
ment.
SYMBOL IDENTIFICATION
CAUTION
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in
increased emissions or decreased immunity of the table.

2
IMPORTANT SAFETY INSTRUCTIONS
The table is designed to be a stand-alone table. This table must not be modified or incorporated into any
other equipment.
As with any moving mechanism there are potential pinch points around and underneath the table. It is
the responsibility of the operator of this equipment to ensure that bystanders are not in the area below or
around this equipment during operation.
Proper operation of this equipment is very important for the safety of the operator, client, and any other
individuals in the area of this equipment. Directions for use of this equipment are described in this manual.
The operator should read these sections carefully.
Weight Limit: (client and accessories) 500 lbs. (227 kg) Do not exceed.
Adjustable Breast Comfort (ABC) System Weight Limit - 100 lbs. (45 kg.) Do not sit on the ABC System.
Do not place foreign objects into the ABC System. Only use as intended. For safety of your client, use a
cloth sheet between the ABC System and your client.
Be certain that the table is completely lowered without any tilt being present prior to discharging an
ambulatory client. The client may lose balance and fall.
This table is not suitable for use in the presence of flammable anesthetic mixture with air or oxygen or
nitrous oxide.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not lift table by the table top. This can damage the table.
When lowering the table, make sure there is nothing underneath the table top that can impede motion (like
stools, cabinets, accessory parts, cleaners, etc).
Use this furnishing only for its intended use as described in these instructions. Do not use attachments not
recommended by the manufacturer.
Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled
persons.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug this furnishing from the electrical outlet before cleaning.
2. Unplug from outlet before adding or removing parts.
3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Contact Oakworks Customer Service before use at
717.235.6807.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
DANGER
Risk of electric shock - Connect this furnishing to a properly grounded outlet only. See Grounding
Instructions in this manual.
Electrical Shock Hazard - The power supply/control module is located on the lift frame. No user
serviceable parts are inside. Refer servicing to qualified personnel. Unplug wall plug prior to contact with
any cables connected to the power supply.

Celesta
Self Adjusting
Removable Arm
Rests (2)
(option)
Cabinet doors (access
both sides)
Fully Enclosed
Cabinet Base
Vertical
Electronic
Lift Columns (4)
Accessory
Outlets (2)
Universal
Table Extender
(Optional accessory)
Flat Top model
shown here
PRODUCT DESCRIPTION
TABLE SPECIFICATIONS
Height 25” - 37” (64 cm - 94 cm)
Width 29” (74 cm), 31” (79 cm)
Length 73” (185 cm)
Lift Capacity 500 lbs. (227 kg)
Maximum Working Load
Weight 300 lbs. (136 kg)
Top Electric Salon Top or Flat Top
Electronics 1 Foot Control
Padding Aero-CelTM System; 4” or 6”
Cabinetry Wood/Baltic Birch
3

Clodagh Gemini
Self Adjusting
Removable Arm
Rests (2)
(option)
Cabinet doors (6 -
access both sides)
Fully Enclosed
Cabinet Base
Exterior
Cabinet shelf;
foot end only
(1)
Vertical
Electronic
Lift Columns (4)
Accessory
Outlets (2)
Universal
Table Extender
(Optional accessory)
Flat Top model shown
here with QuickLock™
Face Rest and
Boiance™Crescent
TABLE SPECIFICATIONS
Height 25” - 37” (64 cm - 94 cm)
Width 29” (74 cm), 31” (79 cm)
Length 73” (185 cm)
Lift Capacity 500 lbs. (227 kg)
Maximum Working Load
Weight 300 lbs. (136 kg)
Top Electric Salon Top or Flat Top
Electronics 1 Foot Control
Padding Aero-CelTM System; 4” or 6”
Cabinetry Wood/Baltic Birch
PRODUCT DESCRIPTION
4

The tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is
rated for the table. (See Grounding below)
Arrange the power cord and control cords so that they will not create a tripping hazard.
Be sure access to the plug is not blocked for disconnecting the table from power.
INSTALLATION
GROUNDING
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electrical current to reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding pin. The pin must be plugged into an appropri-
ate outlet that is properly installed and grounded in accordance with all local codes and ordinances. See
U.S. Sample below.
Correct Implementation Incorrect Implementation
Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.
DANGER

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check
with a qualified electrician or service person if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product - if it will not fit the outlet; have a proper outlet
installed by a qualified electrician.
Grounding Methods
5

The cabinet hood area under the backrest top is not designed for storage or as an area to hold
accessories. DO NOT use this area for holding anything. Damage can occur to the table, espe-
cially when the pre-set position commands that are accessed by the hand control are activated. Placing
anything on this area is prohibiting movement of the backrest and can cause damage to the table or the
object. Using this area as storage will void the warranty.


TO ACCESS THE STORAGE IN THE UNDER TABLE CABINET:
The table has a fully integrated beautiful wood cabinet and base. The large under-table cabinet
provides storage for stacks of towels and other equipment and an in-cabinet plug to accommodate
hot towel cabinets and other accessories.
CELESTA MODEL
CLODAGH MODEL
Easily slide to the side
Swing open for cabinet access
INSTALLATION
UNDER TABLE CABINET
IMPORTANT SAFETY NOTE
6

DOWN
UP
CAUTION
FOOT CONTROL OPERATIONS -
FLAT TOP TABLES ONLY
When using the table Height Up function, do not place anything between the metal frame and
the base structure as damage can occur to the table.
The Flat Top Tables offer height positioning with electronic ease. Operate the foot control as shown
below to raise or lower the height of the table.
DIRECTIONS FOR USE
FOOT CONTROL OPERATION
A table keyswitch is located inside the cabinet on the shelf at the head end of the table. This
key switch will lock-out the table and prevent all motions. It should be used to prevent unau-
thorized use. Remove the key if children have the opportunity to access the table without
adult supervision.
TABLE KEYSWITCH
7

CAUTION
FOOT CONTROL OPERATIONS -
ELECTRIC SALON TOP TABLES ONLY
The Electric Salon Top Tables offer backrest, height and footrest positioning with electronic ease.
Operate the foot control as shown below to raise or lower the backrest, height or footrest functions of
the table.
DIRECTIONS FOR USE
Footrest Down
Footrest Up
Backrest Down
Backrest Up
Height Down
Height Up
Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed for
storage. DO NOT use this area for holding anything. Damage can occur to the table.
8

DIRECTIONS FOR USE
CAUTION
FOOT CONTROL OPERATIONS -
ADJUSTABLE BODY COMFORT (ABC) SYSTEMS ONLY
The OAKWORKS®Adjustable Body Comfort (ABC) System is designed to lower the pressure on breasts
and pectoral muscles, allowing the client to relax and create a more comfortable position for their spine.
The height of the cushion is easily adjusted up and down in small increments by using the foot control.
ABC SYSTEM UP ABC SYSTEM DOWN
FLAT TOP TABLES ONLY
ELECTRIC SALON TABLES ONLY
ABC System
UP
ABC System
DOWN
ABC System
UP
ABC System
DOWN
ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the ABC System.
Only use as intended. For safety of your client, use a cloth sheet between the ABC System
and your client.
9

DIRECTIONS FOR USE
CAUTION
HAND CONTROL OPERATIONS -
FLAT TOP TABLES ONLY
When using the table Height Up function, do not place anything between the metal frame and
the base structure as damage can occur to the table.
The Flat Top Tables offer height positioning and memory positions with electronic ease. Operate the
hand control as shown below to raise or lower the height of the table.
Use either of the top 2 buttons to orient the table in a favorite position. To store
the current position in memory, press the MEM button twice (double click). Two
audible beeps will confirm. To recall a stored position, press & hold the MEM
MEMORY FUNCTION USE
Height Up Height Down
Memory 1 Function Memory 2 Function
10

DIRECTIONS FOR USE
CAUTION
HAND CONTROL OPERATIONS -
ELECTRIC SALON TOP TABLES ONLY
The Electric Salon Top Tables offer backrest, height and footrest positioning with electronic ease.
Operate the hand control as shown below to raise or lower the backrest, height or footrest functions
Use either of the top 8 buttons to orient the table in a favorite position. To store
the current position in memory, press the MEM button twice (double click). Two
audible beeps will confirm. To recall a stored position, press & hold the MEM
MEMORY FUNCTION USE
Height Up Height Down
Backrest Up Backrest Down
Footrest Up Footrest Down
Fully Down/Flat Position Zero Gravity Position
Memory 1 Function Memory 2 Function
Do not sit on backrest or footrest sections. The hood area under the backrest top is not designed for
storage. DO NOT use this area for holding anything. Damage can occur to the table.
11

DIRECTIONS FOR USE
CAUTION
HAND CONTROL OPERATIONS -
ADJUSTABLE BODY COMFORT (ABC) SYSTEMS ONLY
The OAKWORKS®Adjustable Body Comfort (ABC) System is designed to lower the pressure on breasts
and pectoral muscles, allowing the client to relax and create a more comfortable position for their spine.
The height of the cushion is easily adjusted up and down in small increments by using the hand control.
ELECTRIC SALON TABLES ONLYFLAT TOP TABLES ONLY
ABC SYSTEM UP ABC SYSTEM DOWN
ABC System
UP
ABC System
DOWN
ABC System
DOWN
ABC System
UP
Standard
Table Func-
Standard
Table Func-
ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the ABC System. Only
use as intended. For safety of your client, use a cloth sheet between the ABC System and your
client.
12

1/2” Open-end
Leveler Foot
This product is equipped with an interior 120-volt 60Hz accessory outlet. The total electrical load of
equipment plugged into this set of outlets is not to exceed
󰀨
DANGER
󰀨
allows you to store the unit inside with no excess cords to get in the way. With it plugged in, your tow-

at the head end of the table. Simply plug the warming cabinet in and move any excess cord inside the
wooden cabinet.
Note: Appearance of outlets will vary depending on country of use.
DIRECTIONS OF USE
IN CABINET OUTLET
LEVELING INSTRUCTIONS
13
1. Place the table in the location where you plan to use it.
2. Rock the table to determine if it is level with the floor. If
the table rocks back and forth at all, the foot that clears
the floor when you rock the table will need adjustment.
3. Adjust the Leveler Foot by first loosening the locking
nut found just above the rubber Leveler Foot with the
1/2” open-end wrench.
4. Lower the adjustable rubber Leveler Foot until it meets
the floor snugly. Tighten the locking nut against the leg
of the table with the 1/2” open-end wrench to fix the
Leveler Foot in position.
5. Rock the table again to be sure adjustments have
stabilized the table. If necessary make any additional
adjustments in the same way.

Never lift the table by grasping the table top as the table top is not designed to hold the weight of
the base and you could damage the table and the electronics that run the table top.
If you need to move the table, place one person at each corner of the table. We recommend that
you have the table top in the up position (with Arm Rests removed) to have the table top ends out of
the way as much a possible. Have each person firmly grasp the cabinet base at the bottom by the
table legs and lift the table from the base. As when moving any piece of heavy equipment, bend at
the knee and lift with your legs beneath you and not with your back. Be aware and use proper, safe
procedures for moving a table of this size to prevent injury to yourself or the table. We strongly rec-
ommend that a flatbed dolly be used that can hold the entire table if moving the table involves any
large distance.
Grasp
at base
corner
Position at low height range
CAUTION
• Do not put excessive weight or pressure on the extender.
• Excessive pressure can cause premature failure of the Table Extender.
CAUTION
Outlets
The optional stationary Table Extender provides ultimate comfort for your tallest clients, quickly and
easily. The Table Extender comes with two connecting arms that slide into the outlets at the foot
end of the tabletop. Slide these fully into the outlets so the Table Extender is flush to the end of the
table top. This Stationary Extender provides 11” of additional comfort and support when needed.
DIRECTIONS FOR USE
MOVING THE TABLE
TABLE EXTENDER (ACCESSORY OPTION)
14
Before moving the table, disconnect the power cord from the power outlet. Secure the power cord and
all hand or foot controls before moving. The table weighs as much as 300 lbs. (136 kg.) Four people
are required to move the table safely.

DIRECTIONS FOR USE
ADJUSTABLE BREAST COMFORT (ABC) SYSTEM (OPTION)
CAUTION
• ABC System Weight Limit - 100 lbs. (45 kg.) Do not sit on the ABC System.
• Do not place foreign objects into the ABC System. Only use as intended.
• For safety of your client, use a cloth sheet between the ABC System and your client.
15
When turning clients over in the supine position,
you may use the cushion to level during or after
their change of position. IT is not important that
the cushion be completely level. As in prone
positions, make small changes in height and
check in with the client.
In Prone positions, for male or female clients when the face rest is in use, lower
the cushion approximately 3/4” at a time (This is approximately 1 second of
lowering) and check in with the client regarding their comfort after making the
change. Incrementally lower the cushion until the client reports they are com-
fortable. Sometimes going back up a little will be preferred. This whole process
takes no more than 15-20 seconds. After lowering, check headrest position to
ensure comfort & support. NOTE: Breast size is not the only determinate of cush-
ion location. Every person’s comfort spot is different, regardless of breast size.
If you are using the head rest in the Supine
position, you may use the cushion at relatively
high heights to facilitate stretching for short
periods of time. It is not recommended that
clients experience this position for more than
a few minutes.
The O®Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts and pectoral
muscles, allowing the client to relax and create a more comfortable position for their spine. The height of the cushion is
easily adjusted up and down in small increments by using the hand control. We recommend that the cushion height be
adjusted in the following ways:
*Always start with the cushion top level with the top of the table for Prone or Supine Positioning*
PRONE POSITIONING
SUPINE POSITIONING
HEAD REST USE IN SUPINE

Double articulating action provides nearly limitless positioning options
with the QuickLock™Face Rest. The adjustable pad takes pressure off
sensitive facial areas while providing superb support. The QuickLock™
Face Rest can be used in both prone and supine positioning and folds
out of the way when not in use. Adjustments are made easily by loos-
ening the cam locks, adjusting for height and angle and then locking
the cam locks into that position. The table has webbing loops at the
head of the table for a variety of uses and outlets at the other end
that work as well for additional procedures.
3”
2”
• Do not put excessive weight or pressure on the Face Rest.
• Excessive pressure can cause premature failure of the Face Rest.
• Do not extend more than 3 inches
CAUTION
ATTACHING THE QUICKLOCK™FACE REST:
When attaching the QuickLock™Face Rest, just slide the frame dowels into the webbing loops or the
outlets on the foot end, being sure to keep the 1st cam lock within 3” of the table to ensure a stable con-
nection. The recommended length of dowel bracing against the backrest should be at least 2 inches.
To remove the QuickLock™Face Rest, just pull the frame from the webbing loops or outlets until it comes
free. Set it safely aside or store it inside the under-table cabinet until needed.
DIRECTIONS FOR USE
QuickLockTM FACE REST: (ACCESSORY OPTION)
To use the face rest with your clients supine,
rotate the face rest pad so that the thick part of
the pad supports your client’s cervical region.
Adjusting the height and angle of the face rest
gives your clients perfectly comfortable support.
The face pad is flexible so that you can bring
the open ends together or spread them apart to
achieve the most comfortable support for any
size face. To avoid your client’s chin from
hitting the spacebar, make sure the pad is narrow
enough to support their whole face.
For appropriate cervical flexion, use the cam
locks to adjust the downward angle of the face
rest, making sure that the surface of the face rest
pad at the chin is not lower than the surface of
the table.
TIPS FOR GREAT POSITIONING USING THE QUICKLOCK™ FACE REST:
16

1. Loosen bottom 2 set screws
(turn counter-clockwise).
2. Turn side set screw in (clock-
wise to rase or counter-clock-
wise to lower) while lightly rais-
ing the arm rest with your other
hand (to make the adjustment
easier).
3. When you have achieved
the desired height, tight-
en the two bottom set
screws (turn clockwise).
DIRECTIONS FOR USE
17
ADJUSTABLE SIDE ARM RESTS (ACCESSORY OPTION - SALON ONLY)
CAUTION • Do not use the arm rest for client support during the mounting or dismounting of the chair.
• The arm rest is not designed to support the client’s weight.
TO INSTALL THE ARM RESTS:
The Arm Rests adjust automatically as the back rest moves to remain parallel to the floor.
1. Insert end of arm rest into
backrest hole while holding
the arm rest at a 60° angle
to the backrest.
2. Push end all the way into the hole and drop the arm rest into the
horizontal position. Pull outward to make sure the arm rest is
secure.
TO LEVEL THE ARM RESTS:
The Arm Rest height is adjusted at the factory for each table. If the armrest starts to sag with repeated
use, follow the steps below to readjust.