Ocean Digital WR-210CB User manual

Internet radio with bluetooth
User Manual
WR-210CB
Please read this user manual carefully before using the receiver.

Location of Controls
1. Standby button
2. Right button
3. Left / Back button
4. Preset button
5. Local button
6. Home
7. Infrared remote sensor
8. Speaker
9. TFT display 2.4”
10. Rotary control knob for
Volume/Dial/Select – Rotate
to adjust the volume/browsing
menu, press the knob to select
for confirmation
11. Aux-in jack
12. Earphone jack
13. Line out jack
14. DC IN jack
1
2
3
4
56
7
8
9
10
DCIN9V
Aux-in
11 12 13 14
‒ 1 ‒

Remoter control
‒ 2 ‒
1. : Mute
2. : Standby button
3. 0-9: Favorite station key / input letters and
numbers for WiFi Encryption code
4. : Preset the current playing station to
Favorite
5. : Recall the favorite list
6. ▲: Cursor up
7. t: Cursor left / back to previous menu
8. u: Cursor right
9. ▼: Cursor down
10. OK: confirm button
11. : Alarm button
12. : Sleep Timer
13. Vol+: Volume up
14. Vol-: Volume down
15. : Main Menu
16. Mode: Switch between the modes of
radio
17. EQ: Equalizer
18. : Previous station on the list/previous
track on UPnP
19. : Play/pause for internet radio
20. : Next station on the list/next track on
UPnP
21. Local: Access the local station list (Local
area set up in Configuration)
22. Info: View the detailed info of the radio
channel or the music info under
UPnP.
23. Dimmer: Dim down the backlight of
display

Remote control character list
Key“0”―― 0,‘DEL’
Key“1”―― ‘1’->‘@’->‘ ’（space）->‘！’-> “ (double quotes)
->‘#’->‘$’->‘%’->‘&’-> ’（single quotes）->‘（’
->‘）’->‘*’->‘+’->‘，’->‘-’->‘.’->‘/’->‘:’->‘;’->‘<’->‘=’->‘>’->‘?’-
>‘[’->‘\’->‘]’->‘^’->‘_’->‘`’->‘{’->‘|’->‘}’->‘~’
Key “2”―― 2,A,B,C,a,b,c
Key“3”―― 3,D,E,F,d,e,f
Key“4”―― 4,G,H,I,g,h,i
Key“5”―― 5,J,K,L,j,k,l
Key“6”―― 6,M,N,O,m,n,o
Key“7”―― 7,P,Q,R,S,p,q,r,s
Key“8”―― 8,T,U,V,t,u,v
Key“9”―― 9,W,X,Y,Z,w,x,y,z
Remark: press ’→’ to move to next character and press ’OK’ button to
confirm.
You can also press ↑ ↓ to change the character /number, then press the
right key to confirm the entry.
After you finish the entry, press the select button to confirm.
Switching on the radio
Connect the mains adaptor to the radio unit, one end to the DC IN on the
radio and the other end to the AC mains wall socket.
Caution: Use only the mains adaptor supplied with the radio.
Connecting a power supply with a different rating will cause
permanent damage to the radio and may be hazardous.
The display on the front of the radio will light up and show:
Then you can select your prefer language on the radio.
Welcome
• English
Deutsch
Français
< 2/7 8
01:44
‒ 3 ‒

It will ask you if you want to Enable the <Check Network when Power
on>, it is suggested to choose <Yes>. Then the radio will always check
the available WiFi network automatically.
Connecting to your WiFi Network
The screen below will appear. You can choose <Yes> to proceed to
search for the available WiFi network. If your router has the WPS
function, you can select <Yes(WPS)> to proceed.
It will then start scanning the network. After the search is done, it will
display a list of the available router.
Choose your router from the list, enter the WEP (Wired Equivalent
Privacy) or WPA(Wi-Fi Protected Access) code. If your network is not
encrypted with the WEP or a WPA code, the unit will connect to the router
automatically.
Note: The encryption code would have been set up by the person
who set up and configured your network.
Please follow the steps below to enter the encryption code of your router.
- Rotate the rotary knob to browse the character
- Press the Úright button to skip to the next entry
- After you finish with the entries, press the Rotary knob to confirm.
The radio will start connecting to the network.
After the router is connected successfully, it will display the main menu as
follow:
01:01
Would you like to
configure Network now?
Yes(WPS) NOYes
01:44
Linksys
Homeaudio
Demo
MOVE INPUT:OK
Ent er
Password
1/1
16:23
‒ 4 ‒