Oki B2520 Guide

OKI TONER REPLACEMENT INSTRUCTIONS FOR
B2520 B2540
Toner cartridge replacement
Your machine comes with a current consumable management system. It tells you if your toner cartridge is close to its
end of cycle. The following message will appear on your machine screen.
TONER NEAR
END
After this message has been displayed, you are able to change the cartridge.
To quit this screen, press OK.
To replace the toner cartridge, proceed as shown below.
When the following message is displayed on the screen:
TONER EMPTY
REPLACE <OK>
1 Press OK.
OPEN FRONT
COVER
REPLACE TONER
2 Stand in front of the device.
3 Push on the left and right sides of the cover and pull it towards you.
4 Raise and remove the toner cartridge from the machine.
5 Unpack the new cartridge and insert it into the slot as indicated in the diagram below.
6 Close the cover. The following message appears:
HAVE YOU
CHANGED
THE TONER? <OK>
insert the smart card provided with the new toner cartridge as shown on the picture below.
GFBM 2/18/2008

OKI TONER REPLACEMENT INSTRUCTIONS FOR
B2520 B2540
GFBM 2/18/2008
9 A wait message appears.
PLEASE
WAIT
The smart card is read.
NEW TONER
REMOVE CARD
Remove the smart card from the reader, your machine is ready to print again.
Issues with smart cards
If you use a smart card that has already been used, the machine will display:
PLEASE
WAIT
then,
REMOVE CARD
ALREADY USED
If you use a defective smart card, the machine will display:
PLEASE
WAIT
then,
UNKNOWN CARD
REMOVE CARD
If the C button is pressed while the smart card is being read, the machine displays:
ACTION CANCELLED
REMOVE CARD