Oki ES6410 User manual

1
Copyright ©2016 Oki Data Corporation. All rights reserved.
DICOM Embedded Printing Function
User's Guide
OKI DICOM Embedded Printer Version 4 Series
ES6410 DICOM
ES7411 DICOM
ES8431 DICOM
ES9410 DICOM
IMPORTANT:
This manual describes all the functionalities available in the full-option version of OKI
DICOM Embedded Printer V4.00. Available functionalities of your product may be
different from those described in this manual.

2
Copyright ©2016 Oki Data Corporation. All rights reserved.
Introduction
This manual describes how to print from OKI DICOM Embedded Printer supporting
DICOM Protocol.
Refer to the user manual of the standard printer model for instructions on tasks such
as how to load paper and replace consumables in OKI DICOM Embedded Printer.
OKI DICOM Embedded Printer prints DICOM format images sent via a network from
medical imaging applications and medical devices.
OKI DICOM Embedded Printer can generate pages in both grayscale and color.
CAUTION!
This is not medical equipment. Do not use the printed images
from this equipment for medical diagnosis.
Features of OKI DICOM Embedded Printer
• High quality printing with ProQ2400 © multi-level technology
• Compliant with the DICOM 3.0 standard
• Reliability
• Ergonomic features
• Achieves low-cost DICOM-compatible printing
About This Manual
1. Unauthorized copying of this manual in whole or in part is strictly prohibited.
2. The contents of this manual may change without prior notice.
3. Every effort has been made to ensure that the information in this document is
complete, accurate and up-to-date. If you should discover any mistakes or
omissions, please contact your local vendor.
4. While all reasonable efforts have been made to make this document as accurate and
helpful as possible, we make no warranty of any kind, expressed or implied, as to
the accuracy or completeness of the information contained herein.
Manual Copyright
Oki Data Corporation owns all copyrights pertaining to this manual. Unauthorized
reproduction, transcription, and translation of this document are prohibited. You must
obtain written permission from Oki Data Corporation to reproduce, transcribe, or
translate any part of this manual.
© 2016 Oki Data Corporation

3
Copyright ©2016 Oki Data Corporation. All rights reserved.
Trademark Information
OKI is a registered trademark of Oki Electric Industry Co., Ltd.
Java, JavaScript and other trademarks that include Java are trademarks or registered
trademarks of Oracle Corporation, its subsidiaries and its affiliates in the United States
of America and other countries.
OKI DICOM Printing Program License Agreement
The details of the software license agreement described below must be agreed by you
before using the software.
Software License Agreement
IMPORTANT:
Please read this Software License Agreement (“Agreement”) carefully before using
OKI DICOM Printing Embedded Software (“Licensed Software”) contained in OKI
DICOM Embedded Printer (“Product”).
By using the Product, you are indicating your acceptance of these terms and
conditions and this Agreement is deemed effective between you (“Licensee”) and
Oki Data Corporation (“Licensor”).
If you do not agree to the terms of this Agreement, you may not use the Licensed
Software.
1. Scope of the license
Licensor grants, and Licensee accepts, a non-exclusive license to use the
Licensed Software solely in conjunction with the Product.
2. Ownership and Restriction
(1) Licensor or its suppliers own all the copyright and proprietary rights in and to
the Licensed Software. The structure, organization and code contained in
Licensed Software are the valuable trade secrets of Licensor and its suppliers.
Licensed Software is also protected by United States Copyright Law and
International Treaty provisions. Licensee must treat the Licensed Software just
as Licensee would treat any other copyrighted material, such as a book.
(2) Licensee may not make copies, rent, lease, distribute, transfer or reprint the
Licensed Software, in whole or in part.
(3) Licensee agrees not to modify, alter, translate, reverse engineer, decompile,
disassemble, extract in part or separate in part the Licensed Software.
(4) Licensee agrees not to change the file names of the Licensed Software.
(5) Except as stated in this Agreement, Licensor does not grant Licensee any
intellectual property rights in or to the Licensed Software.

4
Copyright ©2016 Oki Data Corporation. All rights reserved.
3. Term and Termination
(1) This Agreement is effective until the Product is destroyed.
(2) Licensor may terminate this Agreement if Licensee fails to comply with any of
the terms and conditions of this Agreement. Upon termination, Licensee shall
destroy Licensed Software and its copies in Licensee’s possession and control.
4. Warranty
THE LICENSED SOFTWARE IS PROVIDED “AS IS”. NEITHER LICENSOR NOR ITS
SUPPLIERS WARRANT THAT THE OPERATION OF THE LICENSED SOFTWARE
WILL BE UNINTERRUPTED, ERROR FREE, OR WILL MEET LICENSEE’S NEEDS.
LICENSOR AND ITS SUPPLIERS MAKE NO WARRANTY, EXPRESS OR IMPLIED, AS
TO NON-INFRINGEMENT OF ANY THIRD PARTY’S RIGHTS, MERCHANTABILITY,
OR FITNESS FOR ANY PARTICULAR PURPOSE.
5. Disclaimer of Liability
IN NO EVENT WILL LICENSOR OR ITS SUPPLIERS BE LIABLE TO LICENSEE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE
DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF
SAVINGS, OR LOSS OF DATA, EVEN IF LICENSOR HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE NOR FOR ANY CLAIM BY ANY THIRD PARTY
(IES) IN ANY WAY ARISING OUT OF OR RELATING TO THE LICENSED
SOFTWARE, WHETHER THE CLAIM ALLEGES TORTIOUS CONDUCT (INCLUDING,
BUT NOT LIMITED TO, NEGLIGENCE) OR ANY OTHER LEGAL THEORY, OR FOR
ANY CLAIM BY ANY THIRD PARTY.
6. Governing Law
The license with respect to the Licensed Software will be governed by the laws
in force in Japan.
7. Severability
If any part of this Agreement is found void and unenforceable, it will not affect
the validity of the balance of the Agreement, which shall remain valid and
enforceable according to its terms.
8. Export Restriction
Licensee agrees that the Licensed Software will not be shipped, transferred,
exported or re-exported into any country or used in any manner prohibited by
U.S., Japanese or any other applicable export laws or regulations. Licensee
agrees that it will not export or re-export the Licensed Software or products
produced therefrom in any form without appropriate U.S., Japanese or any other

5
Copyright ©2016 Oki Data Corporation. All rights reserved.
governmental licenses. This Agreement shall automatically terminate upon
failure by Licensee to comply with this Section 8.
9. Entire Agreement
Licensee represents that Licensee reads and understands this Agreement and
that this Agreement constitutes the entire understanding and agreement
between Licensor and Licensee as to the license relating to the Licensed
Software, and supersedes and replaces any prior agreement, written or oral.
The Licensee’s obligations in this Agreement constitute the obligations to
Licensor and all owners of the right licensed to Licensee under this Agreement.
10. Notice to U.S. Government End Users
All Software provided to the U.S. Government pursuant to solicitations issued on
or after December 1, 1995 is provided with the commercial license rights and
restrictions described elsewhere herein. All Software provided to the U.S.
Government pursuant to solicitations issued prior to December 1, 1995 is
provided with “Restricted Rights” as provided for in FAR, 48 CFR 52.227-14
(JUNE 1987) or DFAR, 48 CFR 252.227-7013 (OCT 1988), as applicable.
“Software” in this section is deemed to be the Licensed Software defined in this
Agreement.
Some of the Licensed Software may include a separate software license
agreement and if you agree to the separate software license agreement, the
terms of such agreement shall prevail for the use of the software.
11. Licensee acknowledges and agrees that Licensor’s suppliers are third party
beneficiaries of this Agreement, with the right to enforce the obligations set
forth herein with respect to the respective technology of such suppliers and/or
Licensor.
Document Terminology
Control panel and web interface messages are all provided in English in this document.

6
Copyright ©2016 Oki Data Corporation. All rights reserved.
The Apache Software License, Version 1.1
Copyright (c) 1999 The Apache Software Foundation. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. The end-user documentation included with the redistribution, if any, must include
the following acknowledgement:
“This product includes software developed by the Apache Software Foundation
(http://www.apache.org/).”
Alternately, this acknowledgement may appear in the software itself, if and
wherever such third-party acknowledgements normally appear.
4. The names “The Jakarta Project”, “Tomcat”, and “Apache Software Foundation”
must not be used to endorse or promote products derived from this software
without prior written permission. For written permission, please contact
[e-mail].
5. Products derived from this software may not be called “Apache” nor may “Apache”
appear in their names without prior written permission of the Apache Group.
THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESSED OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.

7
Copyright ©2016 Oki Data Corporation. All rights reserved.
The Apache Software License, Version 1.1
Copyright (c) 1999-2003 The Apache Software Foundation. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. The end-user documentation included with the redistribution, if any, must include
the following acknowledgement:
“This product includes software developed by the Apache Software Foundation
(http://www.apache.org/).”
Alternately, this acknowledgement may appear in the software itself, if and
wherever such third-party acknowledgements normally appear.
4. The names “The Jakarta Project”, “Commons”, and “Apache Software Foundation”
must not be used to endorse or promote products derived from this software
without prior written permission. For written permission, please contact
[email protected].
5. Products derived from this software may not be called “Apache” nor may “Apache”
appear in their names without prior written permission of the Apache Group.
THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESSED OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.

8
Copyright ©2016 Oki Data Corporation. All rights reserved.
TABLE OF CONTENTS Page
1. Setting up OKI DICOM Embedded Printer
10
1-1 Install the printer
10
1-2 Open DICOM Embedded Printer home page
11
1-3 Setup of AETs
12
1-4 Options for [OKI] print rules on AETs (Table)
16
1-5 Options for [OKI] print rules on AETs (Description)
18
(1) AET Name
18
(2) Activate Max DICOM Log
18
(3) Use US format paper
18
(4) Printer Tray
18
(5) Copy
19
(6) Page Format
19
(7) Replace Header by Logo
19
(8) Header
19
(9) Footer
20
(10) Booklet Print Mode
20
(11) Border Density
22
(12) Empty Image Density
22
(13) Image Background
23
(14) Polarity
23
(15) Smoothing Filter
24
(16) Smoothing Level 2
4
(17) Black & White Mode 2
5
(18) Color Mode 2
5
(19) Contrast
26
(20) Brightness
26
(21) X Scale
27
(22) Y Scale
27
(23) X Offset
27
(24) Y Offset
27
(25) Black Gamma
28
(26) Cyan Gamma
28
(27) Magenta Gamma
28
(28) Yellow Gamma
28
2. Related Settings
29

9
Copyright ©2016 Oki Data Corporation. All rights reserved.
2-1 CONFIG menu
29
2-2 BACKUP menu
30
2-2-1 Create & Download AET Backup File from Printer to PC
31
2-2-2 Upload AET Backup File from PC to Printer
33
2-2-3 Restore AET data from AET Backup File to AET database
36
2-2-4 Delete AET Backup File from Printer
38
3. LOG menu (DICOM Protocol)
40
4. How to print the test patterns
41
5. How to make setting for glossy paper
41

10
Copyright ©2016 Oki Data Corporation. All rights reserved.
1. Setting up OKI DICOM Embedded
Printer
1-1 Install the printer
The following procedures are performed in accordance with the Setup Guide/User’s
Guide/Network Guide supplied on CD/DVD with the printer.
(1) Unpack OKI DICOM Embedded Printer (hereinafter referred to as printer) from
the packing box and install it.
(2) Remove the protective tapes and the protective sheets from the printer.
(3) Open the top cover, and remove the stopper (orange) of the fuser unit.
(4) Install the image drum.
(5) Load paper on the paper tray.
(6) Connect the AC cord to the printer, and turn on the power.
Note: Do not connect the network cable to the printer yet.
(7) Enter the IP address, which is provided by your network administrator, using
the printer control panel.
(8) Perform test printing, and confirm that the IP address is set for the printer
correctly.
(9) Connect the network cable to the printer.
(10) Shutdown the printer and turn off power.
(11) Turn on power. After finishing required process, the printer reboots
automatically.
Next, set up the printer from your PC (Personal Computer) as instructed as follows.
Prepare a PC connected to the same network as the printer.

11
Copyright ©2016 Oki Data Corporation. All rights reserved.
1-2 Open DICOM Embedded Printer home page
Open the web browser on your PC.
Note: This will work even if the PC is not connected to the Internet.
In the address bar of your web browser, enter the IP address set to the printer as
follows.
Example:
When the IP address set to the printer is 192.168.0.13, enter
“http://192.168.0.13:8080/oki/dcm” in the address bar.
Note: This action might not be successful if done just after “Ready” is displayed on
the printer control panel. In this event, wait for 5 to 10 seconds and try
again.
DICOM Embedded Printer home page is displayed.

12
Copyright ©2016 Oki Data Corporation. All rights reserved.
1-3 Setup of AETs
(1) Click [SETUP].
(2) The print rules represented by the AET (Application Entity Title) will be listed.
You can create as many as 25 rules to match your requirements.
You can edit the rules by clicking the rule names (in this case [OKI]).
Delete the rule by clicking.
Add the new rule by clicking [ADD].
Return to the home page by clicking [HOME].

13
Copyright ©2016 Oki Data Corporation. All rights reserved.
(3) Click [ADD] to get a new AET.
Example of new AET screen

14
Copyright ©2016 Oki Data Corporation. All rights reserved.
(4) Edit the parameters to fulfill your requirements.
Example of customized menu with all options activated

15
Copyright ©2016 Oki Data Corporation. All rights reserved.
(5) Save the edited settings.
When you have finished editing the values, click [SAVE].
Memo: Click [CANCEL] to undo your editing.
(6) Click [HOME] on the AET list screen to return to the home page.

16
Copyright ©2016 Oki Data Corporation. All rights reserved.
1-4 Options for print rules on AETs (Table)
Here is presented the full set of options for print rules on AETs.
Depending on the model you purchased, some options may not be available.
Options for [OKI] print rules
on AETs/Models
ES6410 DICOM ES7411 DICOM ES8431 DICOM ES9410 DICOM
Remarks
AET Name
“OKI”
(Default)
X
X
X
X
Maximum 25 AETs.
Activate Max DICOM Log
ON/OFF
(checkbox)
X
X
X
X
Use US format paper
ON/OFF (checkbox)
X
X
X
X
For LETTER and TABLOID.
Printer Tray
Auto
X X X X
Auto Paper Size Selection.
Tray1
Tray1 is standard cassette tray.
Tray2 ~
Tray2 (and later) are optional tray(s).
MPTray
Standard Multi-Purpose Tray
(banner
print).
Copy
Client
X X X X
To use Print SCU’s (sender’s) indication.
1 ~ 10
Page Format
Client
X
X
X
X
To use Print SCU’s (sender’s) indication.
A4 or Letter
X
X
X
X
Standard paper of OKI Printer.
A3 or Tabloid
X
X
A3 Nobi
X
215 x 900 mm
X
X
X
X
Banner paper for banner print.
Note: Only “Black & White Mode” is
available for banner print.
215 x 1200 mm
X
X
X
X
297 x 900 mm
X
X
297 x 1200 mm
X
X
328 x 900 mm
X
328 x 1200 mm
X
Replace Header by Logo ON/OFF (checkbox) X X X X
Please refer to “Graphic Elements
Creation Manual for DICOM Embedded
Printer”.
Header
[text box]
X
X
X
X
Text header.
Footer
[text box]
X X X X
Text footer. Default message is a
caution.
Booklet Print Mode ON/OFF (checkbox)
X
X
X
X
Booklet on A3/Tabloid
X
X
Add a CD page
X
Border Density
Client
X X X X
To use Print SCU’s (sender’s) indication.
White
Black
Empty Image Density
Client
X X X X
To use Print SCU’s (sender’s) indication.
White
Black
Image Background White X X X X
Black

17
Copyright ©2016 Oki Data Corporation. All rights reserved.
Options for [OKI] print rules
on AETs/Models
ES6410 DICOM ES7411 DICOM ES8431 DICOM ES9410 DICOM
Remarks
Polarity
Client
X X X X
To use Print SCU’s (sender’s) indication.
Normal
Reverse
Smoothing Filter
Client
X X X X To use Print SCU’s (sender’s) indication.
Normal
Sharp
Smoothing Level
Low
X X X X To adjust print quality of smoothing.
Medium
Strong
Black & White Mode
Standard
X
X
X
X
Mainly for X-Ray (K toner only).
Fine
X
X
X
X
Mainly for X-Ray (K toner only).
Ultrafine
X
X
X
X
Mainly for CT and MRI (K toner only).
Color Mode
Economy
X
X
X
X
Good quality at the lowest toner cost.
Color Disable
X
X
X
X
To prevent color print.
Contrast
-128 ~ +128
X
X
X
X
To adjust contrast.
Brightness
-128 ~ +128
X
X
X
X
To adjust brightness.
X Scale
10 ~ 1000 (%)
X
X
X
X
To enlarge/reduce print image.
Y Scale
10 ~ 1000 (%)
X
X
X
X
X Offset
-200 ~ 200 (mm)
X
X
X
X
To shift printed area of medical image.
Y Offset
-200 ~ 200 (mm)
X
X
X
X
Black Gamma
0.01 ~ 2.99
X
X
X
X
To adjust print quality with gamma
values.
Cyan Gamma
0.01 ~ 2.99
X
X
X
X
Magenta Gamma
0.01 ~ 2.99
X
X
X
X
Yellow Gamma
0.01 ~ 2.99
X
X
X
X

18
Copyright ©2016 Oki Data Corporation. All rights reserved.
1-5 Options for [OKI] print rules on AETs (Description)
A number of rules can be added to the system. The maximum number of AETs is
25. The following information can be configured for each rule:
(1) AET Name:
AET is an abbreviation for Application Entity Title. The call method is assumed
to be compliant with DICOM Print SCU Protocol.
The AETs defined in this rule have a maximum length of 16 characters (a - z,
A - Z, 0 - 9).
Note: ● The names are case-sensitive.
● In the event of an error or if a name is not present, the printer will
use the default setting.
(2) Activate Max DICOM Log:
Check this box if you want DICOM Embedded Printer to report all details of
DICOM exchange. This is useful in case of trouble.
(3) Use US format paper:
Check this box if you want DICOM Embedded Printer to print in Letter/Tabloid
size.
(4) Printer Tray:
Auto: Allows DICOM Embedded Printer to select the suitable tray up to the
needed size.
Tray#: Forces the printer to use the selected tray regardless of the needed
format. This is useful when paper of different quality is loaded in the
different trays.

19
Copyright ©2016 Oki Data Corporation. All rights reserved.
(5) Copy:
Client: Lets the modality ask for the desired number of copies.
1 to 10: Overrides the modality value and always outputs the desired value.
(6) Page Format:
If the printer supports different paper formats, you can force the printout into
the format you wish. In [Client] mode, the printout will be resized to the
nearest paper size. Refer to DCS (DICOM Conformance Statement) for more
details.
(7) Replace Header by Logo:
This function is used to customize the header of your printouts.
This function allows free creation. Refer to “Graphic Elements Creation Manual
for DICOM Embedded Printer”.
WARNING:
•This function disables the Header in text mode function.
•This function is deactivated when “Booklet Print Mode” is activated.
(8) Header:
This function is used to quickly customize the header of your printouts. (When
“Replace Header by Logo” or “Booklet Print Mode” is not activated.)

20
Copyright ©2016 Oki Data Corporation. All rights reserved.
This customization is limited to one line of text only. Typeface is Courier at 18
points size, available length is the width of the page minus 10mm. (For
example, 52 characters for A4 of which width is 210 mm.)
(9) Footer:
This function allows editing the original statement of the footer.
This customization is limited to one line of text only. Typeface is Courier at 6
points size.
WARNING:Editing this original statement footer is full responsibility of the
user.
(10) Booklet Print Mode:
When “Booklet Print Mode” is enabled, the printer equipped with a duplex unit
will add a cover page and a back page to your job, and then print all pages in
a booklet. The number of additional sheets of paper is limited to 4 sheets of
paper for ES9410 or 1 sheet of paper for ES6410/ES7411/ES8431.
Note: ●Once this mode is enabled, the maximum of simultaneous DICOM
print association is set to 1.
●When “Booklet Print Mode” is enabled, “Header” function is not
available.
After enabling “Booklet Print Mode” on an A3 printer, save your AET and re-
open it. You will be proposed with the “Booklet on A3/Tabloid paper” option.
Enable it to print on A3/Tabloid paper.
“Add a CD Page on Booklet” is only available on ES9410 and will insert a page
to stick a CD holder. This page is the first one just after the cover page.
WARNING:
•Booklets will be produced on A4/Letter paper whatever format you ask for
on the modality.