Oki LD630D User manual

LD630D/LD640D
User’s Guide

-2-
P REFACE
Every effort has been made to ensure that the information in this document is complete, accurate, and
up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The
manufacturer also cannot guarantee that changes in software and equipment made by other
manufacturers and referred to in this manual will not affect the applicability of the information in it.
Mention of software products manufactured by other companies does not necessarily constitute
endorsement by the manufacturer.
While all reasonable efforts have been made to make this document as accurate and helpful as possible,
we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the
information contained herein.
All rights are reserved by Oki Data Corporation. Unauthorized copying, transferring, translating, or
related actions are prohibited. You must obtain written permission from Oki Data Corporation before
doing any of the above.
© 2012Oki Data Corporation
OKI is a registered trademark of Oki Electric Industry Co., Ltd.
Energy Star is a trademark of the United States Environmental Protection Agency.
Microsoft, Windows, Windows Server and Windows Vista are registered trademarks of Microsoft
Corporation.
Apple, Macintosh, Rosetta, Mac and Mac OS are registered trademarks of Apple Inc.
Other product names and brand names are registered trademarks or trademarks of their proprietors.
As an Energy Star Program Participant, the manufacturer has determined that this product
meets the Energy Star guidelines for energy efficiency.
This product complies with the requirements of the Council Directives 2004/108/EC (EMC) and
2006/95/EC (LVD) and 1999/5/ EC (R&TTE), as amended where applicable on the
approximation of the laws of the member states relating to electromagnetic compatibility, low
voltage and radio & telecommunications terminal equipment.
The following cables were used to evaluate this product to achieve EMC directive
2004/108/EC compliance and configurations other than this may affect that compliance.
CABLE TYPE CORE
CABLE TYPELENGTH
(METRE)
CORE SHIELD
Power
1.8
1.8
1.8
1.8 
USB 
LAN

 
Serial
Parallel 
3.0

-3-
M ANUFACTURER
Oki Data Corporation,
4-11-22 Shibaura, Minato-ku,
Tokyo 108-8551,
Japan
For all sales, support and general enquiries contact your local distributor.
I MPORTER TO THE EU/A UTHORISED REPRESENTATIVE
OKI Europe Limited (trading as OKI Printing Solutions)
Blays House
Wick Road
Egham
Surrey, TW20 0HJ
United Kingdom
For all sales, support and general enquiries contact your local distributor.
E NVIRONMENTAL INFORMATION

Rev. 1.0
- 4 -
■Table of Contents
※Manual Information & Usage Precautions ..................................................................5
1. Content Confirmation....................................................................................................9
2. Product Part Names.....................................................................................................10
3. Installation & Usage.....................................................................................................12
3-1 Power Connection ....................................................................................................12
3-2 Interface Cable Connection......................................................................................13
3-3 Paper Installation......................................................................................................15
3-4 Buttons and LED.......................................................................................................16
3-5 Test printing ..............................................................................................................18
4. Self-Test........................................................................................................................19
5. Detailed features..........................................................................................................20
5-1 Printer setting using utility program...........................................................................20
5-2 Stand-alone Configuration Mode ..............................................................................21
5-3 Pause/Cancel ...........................................................................................................22
5-4 Media Calibration......................................................................................................23
5-5 Smart Media Detection.............................................................................................24
5-6 Gap Sensor Auto Calibration Mode ..........................................................................24
5-7 Black Mark SensorAuto Calibration Mode ...............................................................25
5-8 Manual Calibration Mode..........................................................................................26
5-9 Cover Closing Mode.................................................................................................27
5-10 Data Dump Mode....................................................................................................27
5-11 Factory Reset..........................................................................................................28
5-12 The Peel-Off (Option)..............................................................................................28
5-13 Using Fan-Fold Paper.............................................................................................30
5-14 Auto Cutter (Option)................................................................................................31
5-15 Real-Time Clock (Option) .......................................................................................32
6. Cleaning Head..............................................................................................................33
6-1 Cleaning Head..........................................................................................................33
6-2 Cleaning Sensors, Roller or/and Paper Path............................................................34
7. Appendix.......................................................................................................................35
7-1 Specifications............................................................................................................35
7-2 Label Types ..............................................................................................................35

Rev. 1.0
- 5 -
LD630D/LD640D
■Manual Information
※Manual Information & Usage Precautions
This user’s guide contains basic information for product usage as well as for emergency
measures that may be required.
※The following separate manuals provide more detailed content on various technological
issues and areas.
1. Windows Driver Manual
This manual provides information on the installation instructions and main functions
of the Windows Driver.
2. Unified Label Utility-II Manual
This manual provides information on the usage of software for function selection of
this product, operating condition modification, etc.
3. Programming (SLCS) Manual
This manual provides information on label printer commands.
4. True Font Downloader Manual
This manual provides information on the usage of the font downloader that can
download True Fonts and facilitate their usage as Device Fonts.
5. Network Interface Manual
This manual provides information on the configuration and usage of Ethernet
interface.
6. Net Configuration Tool Manual
This manual provides information on the usage of the net configuration tool that can
configure Ethernet interface configuration on this product.
We at Oki Data maintain ongoing efforts to enhance and upgrade the functions and quality
of all our products. In following, product specifications and/or user’s guide content may
be changed without prior notice.

Rev. 1.0
- 6 -
LD630D/LD640D
■Safety Precautions
In using the present appliance, please keep the following safety regulations in order to
prevent any hazard or material damage.
WARNING
Violating following instructions can cause serious injury or death.
Do not bend the cable by force or leave it under any
heavy object.
•A damaged cable can cause a fire.
Do not plug in or unplug with your hands wet.
•You can be electrocuted.
Keep the plastic bag out of children’s reach.
•If not, a child may put the bag on his head.
Do not pull the cable to unplug.
•This can damage the cable, which is the origin of a fire or a
breakdown of the printer.
You must use only the supplied adapter.
•It is dangerous to use other adapters.
Do not plug several products in one multi-outlet.
•This can provoke over-heating and a fire.
•If the plug is wet or dirty, dry or wipe it before usage.
•If the plug does not fit perfectly with the outlet, do not plug in.
•Be sure to use only standardized multi-outlets.
PROHIBIT
ED
PROHIBIT
ED
PROHIBIT
ED
PROHIBIT
ED
PROHIBIT
ED
ONLY SUPPLIED ADAPTER
PROHIBIT
ED

Rev. 1.0
- 7 -
LD630D/LD640D
CAUTION
Violating following instructions can cause slight wound or damage the appliance .
Be careful not to get your fingers pinched when
opening or closing the paper cover. Also be careful
the paper cover does not slip off and drop.
Do not use the printer when it is out of order. This
can cause a fire or an electrocution.
•Switch off and unplug the printer before calling your dealer.
Do not let water or other foreign objects in the
printer.
•If this happened, switch off and unplug the printer before
calling your dealer.
Use only approved accessories and do not try to
disassemble, repair or remodel it for yourself.
•Call your dealer when you need these services.
•Do not touch the blade of auto cutter.
Install the printer on the stable surface.
•If the printer falls down, it can be broken and you can hurt
yourself.
If you observe a strange smoke, odor or noise from
the printer, unplug it before taking following
measures.
•Switch off the printer and unplug the set from the mains.
•After the disappearance of the smoke, call your dealer to
repair it.
TO UNPLUG
DISASSEMBLING
PROHIBITED
PROHIBIT
ED
PROHIBIT
ED
TO UNPLUG
PRINTER
PRINTER
PRINTER
PRINTER
DEALER
PRINTER
MECHANICAL
HAZARD

Rev. 1.0
- 8 -
LD630D/LD640D
■Other Precautions
The copyright for this user’s guide and various other manuals is property of the Oki Data
Corporation. Any copying or conversion into electronic firm and saving of this material
without the express written permission of Oki Data Corporation. is strictly prohibited.
Use of the information contained in this manual is not subject to any patent liability. This
manual has been prepared with utmost care and attention to detail but may contain certain
errors and/or omissions.
Oki Data Corporation. is not legally liable for any damages resulting from the use of the
information in this manual.
Oki Data Corporation. and its affiliates are not legally liable (United States excluded) for
any damages, loss, costs, and/or expenses that result from the breakdown, malfunction,
and/or misuse of the product due to violation or neglect of the operation and maintenance
information and instructions provided by the Oki Data Corporation., as well as from the
unauthorized alteration, repair, and/or modification of the product by the user and/or third
party.
Oki Data Corporation. is not legally liable for any damages and/or issues resulting from the
use of options and/or parts that are not authentic Oki Data products or authorized products.

Rev. 1.0
- 9 -
LD630D/LD640D
1. Content Confirmation
The following items should all be contained in the printer package.
Contact the dealer from which the purchase was made if any item is damaged and/or
missing.
LD630D/LD640D
Power Cord
AC Adapter
CD
User Documents
(Setup Guide, Safety, Warranty)

Rev. 1.0
- 10 -
LD630D/LD640D
2. Product Part Names
Feed Button
Cover Lever
Printer Head
Paper Holder
Upper Gap Sensor
Cover STD
Black-Mark &
Notch Sensor
Pause Button
Paper Cover
Lower Gap Sensor