GB FD
20
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
I
Selezione modo di
funzionamento (AQUARIA)
Tramite il tasto (B) (figura 4), è
possibile selezionare due diversi
modi di funzionamento
dell'apparecchio:
• PURIFICAZIONE
L'attivazione di questa funzione è
indicata dal simbolo "ventilatore"
acceso sul display.
Sul display viene visualizzato
tramite l'indicatore (F) (figura 4)
la temperatura presente
nell'ambiente, mentre tramite
l'indicatore (G) (figura 4) viene
visualizzato il grado di umidità
presente nell'ambiente.
L'apparecchio funziona in modo
continuo purificando l'aria.
• DEUMIDIFICAZIONE
L'attivazione di questa funzione è
indicata dal simbolo "goccia"
acceso sul display.
E' possibile impostare il grado di
umidità desiderato nell'ambiente
in cui l'apparecchio è collocato
agendo sui tasti (C)
o (D) viene rispettivamente
incrementato o diminuito a passi
del 5% il valore di umidità
ambiente desiderato.
L'apparecchio funziona fino al
raggiungimento del valore
desiderato, quindi si spegne
automaticamente. Non appena
l'umiditàrelativa ambiente supera
il valore selezionato l’unità
rientra automaticamente in
funzione.
Siconsigliadi impostare un valore
diumiditàdesideratacompresotra
il 40% e il 60%.
Selezione modo di
funzionamento (AQUARIA
THERMO)
Tramite il tasto B (figura 5) è
possibileselezionarequattro diversi
modi di funzionamento
dell’apparecchio:
• PURIFICAZIONE
L'attivazione di questa funzione è
indicata dal simbolo "ventilatore"
acceso sul display.
Sul display viene visualizzato
tramite l'indicatore (F) (figura 4)
la temperatura presente
nell'ambiente, mentre tramite
l'indicatore (G) (figura 4) viene
visualizzato il grado di umidità
presente nell'ambiente.
L'apparecchio funziona in modo
continuo purificando l'aria.
3.2.3
3
Selecting the operating
mode (AQUARIA)
Key B (figure 4) offers you a choice
oftwo different appliance operating
modes:
• AIR CLEANING
The activation of this function is
indicated by the "fan" symbol lit
on the display.
Through the indicator (F) (figure
4) the current temperature is
visualisedonthe display,whereas
through the indicator (G) (figure
4) the current degree of humidity
isvisualised.The appliance works
continuously cleaning the air.
• DEHUMIDIFICATION
The activation of this function is
indicated by the "drop" symbol lit
on the display.
It is possible to set the desired
level of humidity in the room in
whichthe device ispositioned. By
pressing the (C) or (D) keys the
desired value of humidity in the
room is respectively increased or
decreased by 5% increments.
Theunitoperates until the desired
value is reached and then
switches off automatically. As
soon as the relative humidity of
the room exceeds the value
selected, the unit automatically
restarts.
It is advisable to set a desired
humidity value between 40% and
60%.
Selecting the operating
mode (AQUARIA THERMO)
Key B (figure 5) offers you a choice
offour different applianceoperating
modes:
• AIR CLEANING
The activation of this function is
indicated by the "fan" symbol lit
on the display.
Through the indicator (F) (figure
4) the current temperature is
visualisedonthe display,whereas
through the indicator (G) (figure
4) the current degree of humidity
isvisualised.The appliance works
continuously cleaning the air.
Sélection mode de
fonctionnement
(AQUARIA)
La touche B (figure 4) permet la
sélection entre deux modes de
fonctionnement de l'appareil :
• PURIFICATION
L'activation de cette fonction est
indiquée par le symbole
"ventilateur" allumé à l'écran.
La température présente dans la
pièce s'affiche à l'écran grâce à
l'indicateur (F) (figure 4), tandis
que le degré d'humidité présente
dans la pièce s'affiche grâce à
l'indicateur(G) (figure 4).L'appareil
fonctionne en mode continu en
purifiant l'air.
• DÉSHUMIDIFICATION
L'activation de cette fonction est
indiquée par le symbole "goutte"
allumé à l'écran.
Il est possible de régler le degré
d'humidité souhaité dans la pièce
danslaquellel'appareilest installé
en agissant sur les touches (C)
ou (D), respectivement pour
augmenter ou diminuer par pas
de 5% la valeur d'humidité
ambiantesouhaitée.
L'appareil fonctionne jusqu'à ce
que la valeur souhaitée soit
atteinte, puis il s'éteint
automatiquement. Dès que
l'humidité relative ambiante
dépasse la valeur sélectionnée,
l'unité se met automatiquement
en fonction.
Ilestconseillédeprogrammerune
valeur d'humidité souhaitée
comprise entre 40% et 60%.
Sélection mode de
fonctionnement
(AQUARIA THERMO)
La touche B (figure 5) permet la
sélection entre quatre différents
modes de fonctionnement de
l’appareil :
• PURIFICATION
L'activation de cette fonction est
indiquée par le symbole
"ventilateur" allumé à l'écran.
La température présente dans la
pièce s'affiche à l'écran grâce
l'indicateur (F) (figure 4), tandis
que le degré d'humidité présente
dans la pièce s'affiche grâce
l'indicateur(G) (figure 4).L'appareil
fonctionne en mode continu en
purifiant l'air.
Wahl der Funktionsweise
(AQUARIA)
Über die Taste B (Abbildung 4)
können zwei unterschiedliche
Funktionsweisen gewählt werden:
• LUFTREINIGUNG
Die Aktivierung dieser Funktion
wirddurchdasSymbol"Ventilator"
gemeldet, das am Display
aufleuchtet.
AmDisplay wird überdie Anzeige
(F) (Abbildung 4) die
Raumtemperatur und über die
Anzeige (G) (Abbildung 4) der
Feuchtigkeitsgrad im Raum
angezeigt. Das Gerät funktioniert
kontinuierlich und reinigt die Luft.
• ENTFEUCHTEN
Die Aktivierung dieser Funktion
wird durch das Symbo"Tropfen"
gemeldet, das am Display
aufleuchtet.
Esbestehtdie Möglichkeit, den im
Installationsraum des Geräts
gewünschten Feuchtigkeitsgrad
einzustellen. Mit Hilfe der Tasten
(C)und (D) wird derfür den Raum
gewünschte Feuchtigkeitsgrad in
Schritten von 5 % erhöht
beziehungsweiseerniedrigt.
Das Gerät funktioniert bis zum
Erreichen des gewünschten
Wertesundschaltetanschließend
automatisch ab. Sobald die
relative Raumfeuchtigkeit den
gewählten Wert überschreitet,
setztsich die Einheit automatisch
wiederinBetrieb.
Wir empfehlen einen
Feuchtigkeitswert zwischen 40%
und 60% einzustellen.
Wahl der Funktionsweise
(AQUARIA THERMO)
Über die Taste B (Abbildung 5)
können vier unterschiedliche
Funktionsweisen gewählt werden:
• LUFTREINIGUNG
Die Aktivierung dieser Funktion
wirddurchdasSymbol"Ventilator"
gemeldet, das am Display
aufleuchtet.
AmDisplay wird überdie Anzeige
(F) (Abbildung 4) die
Raumtemperatur und über die
Anzeige (G) (Abbildung 9) der
Feuchtigkeitsgrad im Raum
angezeigt. Das Gerät funktioniert
kontinuierlich und reinigt die Luft.
3.2.2