Olimpia splendid PELER 4 User manual

PELER
4
INSTRUCTION FOR USE AND MAINTAINS

2
ENGLISH
WHEN USING ELECTRICAL APPLIANCES, BASIC
SAFETY PRECAUTIONS SHOULD ALWAYS BE FOL-
LOWED TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, AND INJURY TO PERSONS, INCLUDING
THE FOLLOWING:
This product should be used only in accordance with
the specications outlined in this manual. Usage other than
what has been specied here may result in serious injury.
1. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabili-
ties, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not
play with the appliance.
3. Children should not be allowed to clean or maintain the
appliance without supervision.
4. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied persons
in order to avoid a hazard.
5. Unplug the appliance during lling and cleaning.
6. Ensure that the fan is switched off from the supply mains
before removing the guard.
7. When not in use, disconnect the plug from the power sup-
ply. Grasp the plug, not the main power cord, when discon-
necting the plug.
8. Do not disassemble or alter the unit.
9. Do not use the unit in areas where the temperature is extre-
mely high or low where it may be exposed to direct sunlight.
10 Do not operate the unit near ammable liquids or in

3
PELER 4
ENGLISH
explosive atmospheres.
11. Do not put heavy objects on the unit; this may cause da-
mage or malfunctions on the unit.
12. Since the unit has the humidifying function, please do
not use it for a long time in an airtight place (such as a small
closed room) to avoid too much humidity.
13. Change the water frequently to keep it clean.
14. This unit must be operated in a vertical position.
15. This unit shall not be exposed to dripping or splashing
water.
16. Do not install the unit in a conned space, such as a bo-
okcase or built-in cabinet
17.Switch OFF and unplug the unit before lling with water.
Make sure the water is below the MAX water level line.
18. Switch OFF and unplug the unit before cleaning and
maintenance.
19 The unit should not be adjusted or repaired by anyone
except specialized technicians.
20.To reduce the risk of re or electric shock, do not use this
fan with any speed control device.

4
ENGLISH
MAIN FEATURES AND OPERATING
Cooler function
0.5,1,2,4 hours timing
Low level water protection
Three fan speeds: high, mid, low
Automatic horizontal oscillation
Maximum speed is the default conguration when the machine is turned on
Safety power off function, when air lter is removed
Air ionizer.
APPEARANCE AND FUNCTIONS
A.Control panel
B. Flap
C. Protection grid
D. Front housing
E. Rear housing
F. Power cord and Plug
G. Water tank
H. Base
I. Water level indicator
J. Top Cover
K. Air Filter
L. Remote control
FOR HOUSEHOLD AND INDOOR USE ONLY

5
PELER 4
ENGLISH
DISPLAY PANEL AND OPERATION PANEL
REMOTE CONTROL
Before rst using,
install battery (not included)
TYPE CR2032 3V
A. Mode Button
B. Power Botton
C. Cool Button
D. Timer Button
PRE-OPERATING INSTRUCTION
Select a rm, level, at location at least 15cm from any wall or object for proper air
ow. Place the air-cooler appliance on a water-resistant surface, as water can damage
furniture and some ooring. Do not place the unit directly on carpets, towels, blankets
or other absorbent surfaces.
We will not accept responsibility for
damage caused by water spillage
FILLING
To use the Cooling function, water must be
added to the water tank. Open the tank
and pour in cool, clean water.
E. Ion Button
F. Swing Button
G. Fan speed button
draw out water tank
pour water
Cap for water
draining
Fan speed indicator
Fan speed button

6
ENGLISH
Please pay attention when adding water to:
Unplug the appliance
Before relling, remove any remaining water
Use only clean water
Fill the water tank slowly
Pay attention to the front water level display window to not exceed the maximum level.
Lock the tank with the slider pin, to prevent the tank falling
OPERATING INSTRUCTIONS
POWER button
1.Connect the plug into the power outlet, a beep tone will be heard.
2.Press the POWER button, the FAN indicator and HIGH speed indicator will turn on with
beep tone. The unit will operate in the strongest air of normal mode.
3.Press it again to shut off, the unit stops .
MODE button
Press the mode button to switch between the different functions SLEEP, NATURE and FAN
Note: do not adjust the direction the wind to the human body.
HIGH speed + SLEEP mode
With the fan speed set to high, select SLEEP mode. Both indicators HIGH and SLEEP will come on. The air
speed will change automatically as follows: high and medium during the rst half hour, medium and low during
the second half hour, low and off for the remainder of the time.
MED speed + SLEEP mode
With the fan speed set to medium, select SLEEP mode. Both indicators MED and SLEEP will come on. The
air speed will change automatically as follows: medium and low during the rst half hour, low and off for the
remainder of the time.
LOW speed + SLEEP mode
With the fan speed set to low, select SLEEP mode. Both indicators LOW and SLEEP will come on. The air
speed will change automatically as follows: low and off for the whole time.
HIGH speed + NATURE mode
With the fan speed set to high, select NATURE mode. Both indicators HIGH and NATURE will come on. The
air speed will change automatically as follows: high, medium and low, alternately.
MED speed + NATURE mode
With the fan speed set to medium, select NATURE mode. Both indicators MED and NATURE will come
on. The air speed will change automatically as follows: medium and low, alternately.
LOW speed + NATURE mode
With the fan speed set to low, select NATURE mode. Both indicators LOW and NATURE will come on.
The air speed will change automatically as follows: medium and low, alternately.

7
PELER 4
ENGLISH
Fan speed button
1. When the On button is pressed, the HIGH speed indicator comes on and air is circulated
at maximum speed.
2. Press the speed button once, the MED speed indicator comes on and air is circulated at
medium speed.
3. Press the speed button once more, the LOW speed indicator comes on and air is circulated
at low speed.
SWING button
Press SWING button to turn oscillation function on or off.
TIMER button
1.Press the TIMER button to adjust timer setting. Every press adds 30 minutes up to 7.5
hours. The set period is indicated on the display.
2.To clear timer mode, press TIMER button 16 times (one more press after reaching 7.5
hours); the TIMER indicator will be off.
COOL button
1. Press the COOL button. If there is enough water, the COOL indicator comes on and the
pump starts working.
2. After approx. 3 minutes humid air will begin to circulate.
3. Press the COOL button once more to switch off the function.
Note:
1.If press the COOL button when water is under minimum level or no water, the alarm will
sound after 90 seconds, and COOL indicator will continue to blink about 10 seconds. After
10 seconds, the alarm sound stops and COOL indicator will also turn off.
2.The unit can be used without water as normal electrical fan. In this situation, the COOL
button must be switched off.
ION button
Press the ION button, the ION indicator will be on and the ionizer will start to work, the ne-
gative ion will come out with the wind blowing.
NOTE
- At rst use, the appliance may have a slight odor
- At each re-starting, the appliance may have water condensate on the grid
Each time the unit is switched on, a few drops of water may spray out along with the air jet
and condensation may form on the grill.

8
ENGLISH
DAILY MAINTENANCE
Disconnect the appliance from the power supply.
Check that the fan is switched off
Remove the air lter, clean it with detergent (not petrol, alcohol, gas oil or similar products)
and dry it.
Remove the water cloth, clean it with detergent (not petrol, alcohol, gas oil or similar products)
and dry it.
Drain the water contained in the tank and clean it with a wet cloth or brush.
Clean the body of the unit with a dry cloth. Do not use a wet cloth or any water jet because
it could affect the safety of the appliance and its appropriate working.
Reinstall water cloth.
Reinstall the air lter.
END OF SEASON STORAGE
Follow the daily maintenance suggestions to clean lters and water cloth.
Ensure the air lter and the water cloth are dry, ensure that the water tank contains no ac-
cumulated water.
Pack the unit in its original carton and store in a cool, dry location.

9
PELER 4
ENGLISH
DISPOSAL
This symbol on the product or its packaging indicates that the appliance cannot be treated as
normal domestic trash, but must be handed in at a collection point for recycling electric and
electronic appliances. Your contribution to the correct disposal of this product protects the
environment and the health of your fellow men. Health and the environment are endangered
by incorrect disposal. Further information about the recycling of this product can be obtained
from your local town hall, your refuse collection service, or in the store at which you bought
the product. This regulation is valid only in EU member states
SPECIFICATIONS
For the technical data listed below, consult the characteristic data plate applied to the product.
Voltage (V) 220-240 V~
FREQUENCY (Hz) 50 Hz
POWER (W) 70 W
PRODUCT DIMENSION (L×W×H) 308mm x 292mm x 883mm

279915A-1
www.olimpiasplendid.com