Omega Altise OHV40C User manual

OHV40C & OHV46C
High Velocity
Chrome Floor Fans
Instruction
Manual

omega altise
2
Important Safety Instructions
1. Read all instructions.
2. Disconnect the power plug before dismantling, assembling or before cleaning.
3. Avoid touching mobile parts of the fan.
4. Make sure the fan is on a dry and even surface.
5. Never insert fingers, pencils or any other objects through the guards whenever
the power plug is connected, especially while running.
6. The appliance is not intended for use by young children or infirm persons unless
they have been adequately supervised by a responsible person to ensure that
they can use the appliance safely.
7. Young children or infirm persons should be supervised to ensure that they do not
play with the appliance.
8. Do not use the appliance for any other purpose than its intended use.
9. The fan must not be used if the guards are not fastened according to
instructions.
10. When the power cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
11. Do not use your appliance with an extension cord unless it has been checked
and tested by a qualified electrician or electrical supplier.
Read all instructions before using this unit. Keep them for future reference.
Specifications
Model OHV40C OHV46C Settings 3 speed
Rated Voltage 220-240V / 50Hz Fan blade size 40cm 46cm
Watts 60W 120W Tilt action Tilting fan head
Dimensions
(h x w x d) cm 49x50x20 54x57x24 Oscillation No
Controls Rotary switch Warranty 2 year replacement

omega altise
3
1
2
3
Parts List
1. Fan base tube
2. Metal blade
3. Fan head
Operating Instructions
1. Remove all items of packaging from the fan. This unit comes fully assembled.
2. Use in a dry place, free of excessive humidity and water.
3. To set the fan in motion turn the rotary switches at the back of the unit to the
desirable speed:
0 = OFF 1 = LOW 2 = MEDIUM 3 = HIGH
4. The direction of the airflow is vertically adjustable by tilting the fan head.
5. Turn the switch knob to OFF and unplug the power cord when the fan is not in
use.
Fan Direction Adjustment
1. Do not attempt to make any adjustment to the direction of the grille and fan
assembly until the fan has been turned off and unplugged from the socket.
2. To adjust the direction of the fan, hold the grille and gently tilt the fan until the
desired position is reached.
3. Plug the fan back into the socket and turn the fan on.

omega altise
4
Care and Maintenance
1. Always disconnect the cord from the electrical outlet when cleaning your fan.
2. Light accumulated dust may be removed from the fan with a soft cloth or vacuum
cleaner using the dusting brush attachment.
3. Wipe the exterior surfaces of the fan occasionally with a cloth moistened (not
dripping wet) with a mild soap solution. Dry the case thoroughly with a soft dry
cloth before operating the fan.
4. Avoid the use of gasoline, benzine, thinner etc as they may result in damage to
the fan.
5. Store the fan in a clean dry place when not in use.
CAUTION! Do not immerse the fan in water or allow water to drip into
the interior of the fan housing as this could create a fire or electric
shock hazard.
WARNING! Do not attempt to open or repair the fan yourself. Doing so
could void the warranty and cause damage or personal injury.
Omega Altise products are distributed in Australia by MEA,
(A Division of Hagemeyer Brands Australia Pty Ltd)
ABN 28 001 375 686
Locked Bag 4013, Kingsgrove NSW 2208
Phone: [phone]
Fax: [phone]
Email: [email protected]
Web: meaappliances.com.au