Omix-Ada 13216.01 User manual

Copyright © 2016 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 100 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [email protected]
Elite Ballistic Front Seat Covers
Page 1/3
Part 13216.01
13216.02
OMIX-ADA®TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: [email protected]
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
1. Ballistic Front Cover, RH (1)
2. Ballistic Front Cover, LH (1)
3. Ballistic Head Rest Cover (2)
Components
1
2
3

Copyright © 2016 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 100 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [email protected]
Elite Ballistic Front Seat Covers
Page 2/3
4. Fit bottom portion of seat cover to front of seat
and secure buckles under seat as shown on right.
Tighten straps.
1. Remove headrest from seat.
2. Slide cover over top of front seat.
3. Push rear buckles and fabric through crease in
bottom of seat.
5. Secure side hooks to buckles under seat as shown
on right.

Copyright © 2016 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 100 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [email protected]
Elite Ballistic Front Seat Covers
Page 3/3
7. For 2007-2010 models, slide Head Rest Covers over
head rests. For 2011-current models, slide Head Rest
Covers over head rests and secure with hook and
loop fabric.
8. Install head rest onto seat. Repeat for second side.
6. Fit rear side fabric around seat adjustment knob
and secure with hook and loop fabric.