Omix-Ada Rugged Ridge Alloy 13551.18 User manual

Copyright © 2016 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [email protected]
‘97-’06 Wrangler Dash Multi-Mount System
Page 1/3
Part 13551.18
OMIX-ADA®TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: [email protected]
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
1
2
3
4
1. Multi-Mount Tray (1)
2. Universal Ball Mount (1)
3. Cap Piece (1)
4. Self-Tapping Screw (3)
Components

Copyright © 2016 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [email protected]
‘97-’06 Wrangler Dash Multi-Mount System
Page 2/3
3. Remove backing of adhesive tape and place
Multi-Mount tray into dash recess.
4. Install three Self-Tapping Screws through Mutli-
Mount Tray into dash recess in vehicle, beginning
with front-most Self-Tapping Screw.
1. Remove all items and clean vehicle dash recess.
2. Test t Multi-Mount Tray in dash recess. Multi-
Mount Tray will sit at rear-most wall of dash recess.

Copyright © 2016 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [email protected]
‘97-’06 Wrangler Dash Multi-Mount System
Page 3/3
Four Congurations for Dash Multi-Mount System:
No Accessory
Camera/Tripod Mount Only
Phone/GPS Mount Only*
Phone and Camera Mount*
*Shown with Rugged Ridge Phone Mount (Part #13551.13)

Copyright © 2015 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 100 | SUWANEE, GA 30024 | PHONE: [phone] | FAX: [phone] | [email protected]
Phone Mount for Dash Multi-Mount System
Page 1/1
2. Press Phone Mount adapter piece into Ball Mount.
1. Place Outer Ring over end of Ball Mount.
3. Pull Outer Ring over Phone Mount adapter and
twist to secure.
Part 13551.13