Omron TL User manual

D-115TL
TL
Smooth Barrel Proximity Sensors
TL
Cylindrical dia 8 mm
all-metal housing with
M8 plug connection
or pre-wired
Ordering information
Short barrel type
Long barrel type
Specifications
Versions Sn(mm)
Output
NPN PNP
Size Type NO NC NO NC
8 mm
Shielded Connector 1.5 TL-C1R5E1-M3-E1 TL-C1R5E2-M3-E1 TL-C1R5F1-M3-E1 TL-C1R5F2-M3-E1
Pre-wired TL-C1R5E1-E1 TL-C1R5E2-E1 TL-C1R5F1-E1 TL-C1R5F2-E1
Non-shielded Connector 2TL-C2ME1-M3-E1 TL-C2ME2-M3-E1 TL-C2MF1-M3-E1 TL-C2MF2-M3-E1
Pre-wired TL-C2ME1-E1 TL-C2ME2-E1 TL-C2MF1-E1 TL-C2MF2-E1
Versions Sn(mm)
Output
NPN PNP
Size Type NO NC NO NC
8 mm
Shielded Connector 1.5 TL-C1R5E1-M3-E2 TL-C1R5E2-M3-E2 TL-C1R5F1-M3-E2 TL-C1R5F2-M3-E2
Pre-wired TL-C1R5E1-E2 TL-C1R5E2-E2 TL-C1R5F1-E2 TL-C1R5F2-E2
Non-shielded Connector 2TL-C2ME1-M3-E2 TL-C2ME2-M3-E2 TL-C2MF1-M3-E2 TL-C2MF2-M3-E2
Pre-wired TL-C2ME1-E2 TL-C2ME2-E2 TL-C2MF1-E2 TL-C2MF2-E2
Type
8 mm Ø
TL-C1R5@@-E1
TL-C1R5@@-E2
TL-C2M@@-E1
TL-C2M@@-E2
Sensing distance (Sn) 1.5 mm ± 10% 2 mm ± 10%
Power supply 10 to 35 V DC
Power consumption 15 mA max.
Object St 37 8 x 8 x 1 mm
Switching hysteresis 1 to 15 %
Switching frequency 5 kHz
Temperature dependency 10% max.
Ambient temperature -25° to 70° C
Switching output 300 mA max.
Residual voltage 2.5 V max.
Function display 1 LED
Degree of protection IP 65
Housing material Nickel-plated brass
F502-EN2-04.book Seite 115 Dienstag, 26. Juli 2005 5:48 17

D-116 Inductive Sensors
Output circuits
Reduction factors (typical values)
Dimensions (mm)
Chrome-nickel Sn x 0.9
Brass Sn x 0.5
Aluminium Sn x 0.45
Copper Sn x 0.4
PNP output
+
A
Load
-
Circuit
A
NPN output
Circuit
Load
+
-
A
+-
TL-C1R5@@-E1
TL-C2M@@-E1
TL-C1R5@@-E2
TL-C2M@@-E2
F502-EN2-04.book Seite 116 Dienstag, 26. Juli 2005 5:48 17

D-117TL
TL
Installation
The minimum clearances indicated below must always be maintained in the case of non-shielded mounted types.
Installation accessories
Type d1 d2 d3 L1 L2 w h d Material
Y92E-B8-E1 8.0 6.0 3.2 7.5 3.3 20 12 16 Brass
Y92E-B8-E2 8.0 6.0 3.2 7.5 3.3 20 14 16 Plastic
3d
d
2Sn
3Sn 2d
d
3Sn
d
2Sn
dd
b
L2
hd1
d3
d2
L1
t
F502-EN2-04.book Seite 117 Dienstag, 26. Juli 2005 5:48 17

D-118 Inductive Sensors
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. D05E-EN-01
F502-EN2-04.book Seite 118 Dienstag, 26. Juli 2005 5:48 17