Omron E3X-DRT21-S User manual

Fiber Amplifier Sensor Communication
Unit Supports Multi-vendor Networks
DeviceNet Model
PLC
Configurator
Download a group of parameters for devices
(Sensors, Temperature Controllers, etc.,
supporting DeviceNet) that you have prepared
on your personal computer in a single batch.
Monitor operating hours.
The operating hours for sensors can be stored
in internal memory and used for planning
maintenance and other applications.
Up to 16 channels can be connected.
Supports a wide range of sensors.
The Unit supports a variety of digital sensors, including
Fiber Sensors, Laser Sensors, and Proximity Sensors.
Mobile Console
A built-in interface for a Mobile
Console lets you bring setting
and confirmation operations
to your fingertips.
ON/OFF signals and incident light levels can be sent to the host
PLC without any need for programming (using the Remote I/O Com-
munications Slave function).
Threshold values and function settings can be read, written, or
taught (using the Message Communications function).
Device parameters prepared on a personal computer connected to
the network can be downloaded in a batch operation (using the Con-
figurator).
Optical Communications
N E W
Fiber Amplifier Sensor
Communication Unit
E3X-DRT21-S
PLC
■
■
■

E3X-DRT21-SDevice Net
Type
■Fiber Amplifier Sensor Communication Unit ■Wire-reducing Connector
Model
E3X-CN02Cordless Slave Connector
Type Model
Item Description
Communications
functions
Mobile Console connection
Power supply
Maximum connectable Sensors
Connectable Sensors
Power supply voltage
Sets parameters using Explicit messages
Edits slave device parameters, enables device monitor functions
E3X-MC11-S-V2 can be connected
Communications Method
Message
Communications function
Configurator
Remote I/O Communications
Slave function
DeviceNet communications
Monitors ON/OFF output, status, incident light level (digital display data)
Supplied from the DeviceNet communications connector
(power is also supplied to all connected Sensors through Wire-reducing Connectors)
13 or 16 (depending on the operation mode)
E3X-DA-S Series or E3X-MDA Series Digital Fiber Sensor
E3C-LDA Series Laser Photoelectric Sensor with Separate Digital Amplifier
E2C-EDA High-resolution Digital Proximity Sensor with Separate Amplifier
(use connector-type Amplifier Units and the E3X-CN02 Cordless Slave Connector)
11 to 25 VDC
Current consumption (See note.) 70 mA max.
Ambient operating temperature −20 to 55˚C
Ambient operating humidity 35% to 85% (with no condensation)
Storage temperature
E3X-DRT21-S
Fiber Amplifier Sensor Communication Unit
−30 to 70˚C
Dimensions (mm) 30 x 34.6 x 71.3 (WxHxD)
Weight (packed state) Approx. 150 g
Note: This does not include the current supplied to the Sensor.
30
34.8
(75)
16
(106)
71.3
(65)
34.6
Ordering Information
Ratings and Specifications
Dimensions (mm)
Authorized Distributor:
Note: Specifications subject to change without notice. Cat. No.E359-E1-01
Printed in Japan
0205-2M (0205) (B)
Note: Do not use this document to operate the Unit.
OMRON Corporation
Industrial Automation Company
Application Sensors Division
Sensing Devices and Components Division H.Q.
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: [phone]/Fax: [phone]
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit,
Carl-Benz-Str. 4, D-71154 Nufringen,
Germany
Tel: [phone]/Fax: [phone]
OMRON ELECTRONICS LLC
1 East Commerce Drive, Schaumburg,
IL 60173 U.S.A.
Tel: [phone]/Fax: [phone]
OMRON ASIA PACIFIC PTE. LTD.
83 Clemenceau Avenue,
#11-01, UE Square,
239920 Singapore
Tel: [phone]/Fax: [phone]
OMRON CHINA CO., LTD. BEIJING OFFICE
Room 1028, Office Building,
Beijing Capital Times Square,
No. 88 West Chang'an Road,
Beijing, 100031 China
Tel: [phone]/Fax: [phone]
This document provides information mainly for selecting suitable models.
Please read the Instruction Sheet carefully for information that the user must
understand and accept before purchase, including information on warranty,
limitations of liability, and precautions.