OPTO-EDU A34.5017 User manual

1
Table
of
Contents
Precaution…………………………………...……………….2
Preparation………………………………………………..…3
Standard accessories……………...…………….4
Parts Names & Functions…………………….....5
System requirements……………..….…….....…6
Technical Specifications…………………………6
onnect Microscope to iOS/Android Device……..……….7
Download App……...…………………………..7
onnect to iOS/Android Device……………....7
Add amera to App and Start Preview……………………9
apture and Playback………………………………..……12
apture photo………………………………...…12
Record video……………………………….……12
View aptured files……………………………13
amera Settings……………………………………...……14
On-screen Display………………………………14
Wi-Fi Setting…………………………………..16
SD ard Settings…………….…………….…18
Time Settings………………………………….19
hange amera Password…………………...20
hange AP Password………………………….21
Download recorded Video by iTunes………………….…22
Reset the amera………………………………………....23
Trouble shooting…....…..………….………………………24

2
Welcome
Thank you for your choice of our product - it is a high-tech
while easy to use HD Wi-Fi Internet Digital Microscope.
With this unit you will see a unique and “bigger” world on
iOS/Android devices either by AP mode or via Internet.
It’s easy to zoom in on stamps, coins, paper currency,
plants, insects, skin, fabrics, rocks and minerals, and so
much more.
We recommend reading this manual first to get the best
out of this unit.
1.
Precaution
Before using the Wi-Fi Digital Microscope, please ensure
that you read and understand the safety precautions
described below. Always ensure that the Wi-Fi Digital
Microscope is operated correctly.
The Microscope is not waterproof, so keep it dry.
Do not use it in a humid place like bathrooms. A dry
environment will maintain its life to maximum.
Use the Microscope only at -5 ℃ -50 ℃ .
Sudden temperature change may form dew inside
the Microscope like entering a warm room in cold
winter. Put it inside a handbag or plastic bag to slow
down temperature changes.

3
Do not point Microscope lens to the sun or strong
light for a long time. Powerful light may hurt the
light-sensitive electronics.
Avoid touching the lens.
The white LEDs which illuminate the Microscope
target field are very bright. Do not stare directly into
these LEDs as it may damage your eyes.
The clear plastic distance shell sometimes picks up
dirt or toxic material from a microscopically observed
surface. Be careful that this doesn’t get in contact
with the human skin. Always wash carefully or
disinfect as needed.

4
2. Preparation
■
■■
■ Standard accessories
Wi-Fi Microscope Stand (optional)
D adaptor User manual

5
■
■■
■ Parts Names & Functions
Part# Meaning Part# Meaning
1 Reset 5 LED dimmer
2 Micro-SD slot 6 D -in
3 Focus wheel 7 1/4-inch hole
4 ON/OFF 8 harging indicator

6
■
System
equirements
* iOS: 5.1 and later
* Android: 4.3 and later
■
■■
■ Technical Specifications
Magnification
Ratio 10x~200x
Still capture
resolution 1920x1080, 640x480, 320x240
Video capture
resolution 1920x1080, 640x480, 320x240
Focus Range Manual focus from 0mm to 50mm
Video format AVI
Photo format JPEG
Light source 6 LED (brightness adjustable)
Power source
Rechargeable Li-ion battery
Working time: 100mins,
harging time: 120mins
harging power: 5V D
iOS/Android
interface Wi-Fi
App iOS: Tiny apture at App Store
Android: Tiny apture at play.google.com
Size Microscope: 106mm (L) x 36mm (R)

7
3. Connect Microscope to iOS/Android Device
1) Download App
iOS: Search and install TinyCapture from App Store.
Android:
Search and download TinyCapture from play.google.com
or the download link provided by seller and install it.
iOS Android
2) Connect the Wi-Fi Microscope to iOS/Android
device. (here we take iOS device as an example)
(1) Power on the microscope by sliding the ON/OFF
switch to ON position. The camera’s hotspot will be
shown on the Wi-Fi list of your smart phone in around
30 seconds.
(2) Turn on the Wi-Fi of your iOS/Android device; search
the Wi-Fi Digital Microscope from the Wi-Fi Device list.

8
The Wi-Fi Microscope name is WIFI
Microscope_xxxxxx (xxxxxx is the last 6 digits of the
camera ID), as follows:
The password to connect the device is 12345678.
Please see page-21 on how to change the password.

9
4. Add Camera to App and Start Preview
1) Start the app, click +at the right corner, then click
Search, finally click OK to confirm.
Input password, it is 8888 by default.
Please see page-20 on how to change the password.

10
2) The camera will be listed as follows. After clicked, it
will list as online.

11
3) lick the online camera, you can then start preview.
HD/VGA/QVGA
rossing
Brightness
ontrast
amera settings (P14)
Photo capture
Video capture
Mirror
Flip
Speaker

12
5. Capture and Playback
1) Capture photo
lick and then a photo will be taken!
2) ecord video
lick , and there will be a red dot in the icon
, which means video is on recording. Press again
to finish the recording (then the red dot will disappear).

13
3) View recorded files
From the main page, click Media at the bottom.
Snapshot Files:
Photos captured. You can
save photo to album by
pressing it for 2 seconds.
ecord Files:
For Android, the files are
stored under album.
For iOS, you can access
the files by iTunes (see
Page-22).
Camera SDCard Files: video captured and stored on
Micro-SD card.
Download Files: Videos downloaded from Micro-SD card
to Smart phone.

14
6. Camera Settings
When a camera is online, click to enter the setting
page as follows:

15
1) On-Screen Display
Here you can choose whether to display the on-screen
info including time/date at the left-top corner and camera
name at the left-bottom corner.

16
2) Wi-Fi Settings
Here you can configure the camera to connect to a router
(network) and then you smart phone can access to the
camera via Internet, which means you can visit the
camera anywhere in the world so long your phone has
access to Internet.
hoose a new network (router) to join, for example,
TP-MUST. And then input password of the network, and
then click OK.
onfirm the input; the camera will reboot to join the new
network. The rebooting process will need around 40-60
seconds.

17
After rebooting successfully, the camera will connect to
the router (new network) and can access to Internet if the
router has Internet access. Then your Smartphone can
access to the camera via Internet. Even your Smartphone
is far away from the camera, it can still access the camera
so long your phone has Internet access. Now the camera
is an Internet Microscope.
If the Wi-Fi setting is failed (for example, the password is
wrong), please reset the camera (see Page-23).
Under Internet connection mode, if you power on the
camera again, it will take around 90s for it to search and
connect the router. If the router does not exist, the camera
will switch to AP (point to point connection) again in 90s.
You can remove Internet connection mode by reset.

18
3) SD Card ecord Settings
You can setup whether to start recording video by the
inserted Micro-SD car.
File Length means the video length of each clip.
Loop Recording means when the SD card is full,
recording will overwrite the card from the earliest file.
Here you can format the Micro-SD card.

19
4) Time Settings
You can sync the camera time with your phone time.