Optoma PCT-101 User manual

Roll Type PCT User Manual
PCT Interactive Roll User Guide
2017/05/25

Roll Type PCT User Manual
2
Table of Contents
PRECAUTION ....................................................................................................................................................................................................................... 3
1. PRODUCT INTRODUCTION................................................................................................................................................................................................. 5
1-1 Specifications ............................................................................................................................................................................................................ 6
1-2 Computer Requirement............................................................................................................................................................................................. 7
1-3 Operation System Requirement................................................................................................................................................................................. 8
1-4 Environment Requirement ........................................................................................................................................................................................ 8
2. PROJECTOR AND PCT INSTALLATION ASSESMENT.............................................................................................................................................................. 11
3. SUGGESTED PROJECTOR AND WALL MOUNT INSTALLATION .............................................................................................................................................. 13
3-1 101” ROLL TYPE PCT + Suggested Projector .............................................................................................................................................................. 13
3-2 138” ROLL TYPE PCT + Suggested Projector .............................................................................................................................................................. 16
3-3 Wall Plate Installation ............................................................................................................................................................................................. 19
3-4 Cable Management ................................................................................................................................................................................................. 20
3-5 Installation Projector On Arm .................................................................................................................................................................................. 21
3-6 Projection Image Adjustment .................................................................................................................................................................................. 22
4. ROLL TYPE PCT INSTALLATION ......................................................................................................................................................................................... 33
5. CALIBRATION ................................................................................................................................................................................................................. 44
6. TROUBLE SHOOTING....................................................................................................................................................................................................... 52
7. PRODUCT LIST................................................................................................................................................................................................................ 61

Roll Type PCT User Manual
3
PRECAUTION
•Assembly or disassembly of Roll type PCT product should be only performed by professional installers.
•Roll type PCT Product is an indoor use only product, long-term exposure of the sunlight or in humid environment might damage the Roll type PCT.
•Roll type PCT Product should be installed away from fire source.
•Roll type PCT is not water repellent. Installation of PCT should be away from water leaking source.
•Roll type PCT installation should be 30cm away from the power switch and 50cm away from transformer box to prevent interference.
•Ensure that any cables extending across the floor to your Roll type PCT Product are properly bundled and marked to avoid a trip hazard.
•Do not stand (or allow children to stand) on a chair to touch the surface of your Roll type PCT Product.
•Do not climb (or allow children to climb) on Roll type PCT Product. Climbing on the interactive roll type PCT could result in personal injury or product damage.
•You must connect the USB cable that came with your Roll type PCT Product to a computer. For extending USB cable length over 5m, a certified active
extension USB cable is required. In addition, the USB source computer must be compliant with CSA/UL/EN 60950 and bear the CE mark and CSA
and/or UL Mark(s) for CAS/UL 60950. This is for operating safety and to avoid damage to the Roll type PCT Product.

Roll Type PCT User Manual
4
Maintenance: If necessary, gently clean the Roll type PCT Product with a microfiber cloth and Clean water. Dampen a microfiber cloth with a clean water then
wipe the screen gently until ink is wiped clean, then use another clean and dry microfiber cloth to wipe whole surface again.
If using the whiteboard cleaner for cleaning, users need to take a clean and dry microfiber cloth to wipe whole surface until the solvent is removed.
Roll type PCT Product is not a water-proof product, splashing water should be forbidden.

Roll Type PCT User Manual
5
1. PRODUCT INTRODUCTION
PCT interactive whiteboard is a series multi-touch giant electric whiteboard to be associated with computer, projector and software providing education and
corporate a total collaboration solutions.
The image will be projected to PCT via projector, also, the touch function will be enabling through USB cable which is connected to the device (computer,
tablet, etc.), therefore, this simply makes projector, device, PCT a touch system. Meanwhile, PCT is able to be considered as an input device (like touch pad)
as well as a huge monitor for your devices
PCT is a light-interference free touch product if compares with IR matrix or Optical touch products, and it also supports up to 30 points touch, in short, the
touch function works just like I-Pad-high accuracy and sensitivity.
PCT, Device, Projector Connections

Roll Type PCT User Manual
6
1-1 Specifications
101” ROLL TYPE PCT
項目
規格
Size
101” (16:9), 2248 x 1295 mm
Touch Sensor Size
94” (16:9), 2096 x 1174 mm
Touch Tech
Projected Capacitive Touch
Touch Points
30 points
Report Rate
>100Hz
Latency
≦100 ms
Accuracy
± 2mm typical
Touch Height
< 0.5 mm
Passive Stylus Nib Size
> 8 mm
Calibration
4 / 9 points Calibration
Power Consumption
< 2.5 W
Dry Erase Surface
Optional
Weight
< 15kg
Operation Temp.
0°C ~ +40°C
Storage Temp.
-20°C ~ +60°C
Humidity
20–90%

Roll Type PCT User Manual
7
138” ROLL TYPE PCT
項目
規格
Size
138” (16:6), 3282 x 1295 mm
Touch Sensor Size
132” (16:6), 3130 x 1174 mm
Touch Tech
Projected Capacitive Touch
Touch Points
30 points
Report Rate
>100Hz
Latency
≦100 ms
Accuracy
± 2mm typical
Touch Height
< 0.5 mm
Passive Stylus Nib Size
> 8 mm
Calibration
9 / 36 points Calibration
Power Consumption
< 2.5 W
Dry Erase Surface
Optional
Weight
< 20kg
Operation Temp.
0°C ~ +40°C
Storage Temp.
-20°C ~ +60°C
Humidity
20–90%
1-2 COMPUTER REQUIREMENT
CPU: Intel CoreTM i3 or above
Memory: 4GB+

Roll Type PCT User Manual
8
1-3 Operation System Requirement
Windows
MAC OS X
Chromebook
Android
OS Version
Win7; Win8; Win10
10.9; 10.10; 10.11
51.0.2704.103(64-bit)
(Kernel version 4.0+)
Touch Points
30 points
Single (Limited by MAC OS
X)
16 points (Limited by
Chrome OS)
10 points (Limited by
Android OS)
Driver Required
Not Required
Required
Not Required
Not Required
Calibration Tool
Support
Non-Support (Please use
Windows Calibration Tool.)
Non-Support (Please use
Windows Calibration Tool.)
Non-Support (Please use
Windows Calibration Tool.)
1-4 Environment Requirement
Wall Selection
1. Firm and stable flat wall. Magnetic Surface
or any metallic surface which can be
attached by magnet is highly suggested.
2. Space
138”: 3.5m width, 2.5m height (at least)
101”: 2.5m width, 2.5m height (at least)
3. Wall Surface: Please refer to below section
Operation Temp.
0°C ~ +40°C
Storage Temp.
-20°C ~ +60°C
Humidity
20%~80%
Water Resistance
1. In-Door Use Only.
2. Keep PCT surface dry all the time.
ESD
EN61000-4-2, No damage up to 4kV for direct
(contact) discharge
EMI
EN55022/CISPR 22, Class B & EN55032/CISPR
32, Class B

Roll Type PCT User Manual
9
1. Roll type PCT installation should be 30cm away from the water leaking source such as an opened window, a faucet, and should be 30cm away power
switch and 50cm away from transformer box to prevent interference.
2. Wall surface requirement
2.1 Non-flatness: Suggest non-flatness (d) is less than 10mm for better user experience.
The distance between the highest position and lowest position of the wall should be less than 10mm.
2.2 Wall surface condition:
There should not be protruding with height over 0.5mm or concave with depth over 0.5mm on the wall surface.
Case C
Horizontal line
d
Horizontal line
Case A
d
Case D
d
Horizontal line
Horizontal line
Case B
d
protruding
Horizontal line
concave Wall surface

Roll Type PCT User Manual
10
PCT should not be installed on a brick wall directly as the gap between bricks because floating PCT will impact capacitor field, which might result in
error touch event.
When installing on a brick wall is necessary, it is suggested to attach a non-metal hard board with 2-3mm thickness to the brick wall first, then install
the roll type PCT.

Roll Type PCT User Manual
11
2. PROJECTOR AND PCT INSTALLATION ASSESMENT
Please kindly be aware of the height between ROLL bottom and ground before installing, too high or too low will cause inconvenience for users while using,
the suggested height is as following,
For children: the height between ground and ROLL bottom is suggested to be 40 ~ 60cm.
For adult: the height between ground and ROLL bottom is suggested to be 70 ~ 90cm.
40cm-60cm
70cm-90cm

Roll Type PCT User Manual
12
Please check your own projector’s installation guide if you did not get your projector and Roll PCT as a complete system. If you do, please check the
instructions as following,
Tools
•Wrench
•Hexagonal
•Screwdriver
•Phillips Screwdriver
•Electric drill
•Hammer
•Carpenter’s Level or Laser leveler
•Ruler
•Ladder
•Extended power cord

Roll Type PCT User Manual
13
3. SUGGESTED PROJECTOR AND WALL MOUNT INSTALLATION
3-1 101” ROLL TYPE PCT + Suggested Projector
Step 1. Define Projector Wall Mount Position
1. Define Projector Wall Mount vertical Position.
1-a. Distance (X) is the distance from Interactive White Board bottom edge to the ground. If the Interactive White Board is mainly for children,
distance X will be 40cm to 60cm. If the Interactive White Board is for adult, distance X will be 70cm to 90cm.
Height: 1295mm
Width: 2248mm

Roll Type PCT User Manual
14
1-b. The distance between the top edge of the wall mount to the ground is X +1615mm. That is the height of wall mount)
2. Define Projector Wall Mount horizontal Position.
According the environment and determine the expected Image Center position, then right edge of the wall mount should be 13mm away from
the expected image center line. (That is the horizontal position of wall mount)
Height: 1295mm
Projector wall
mount upper
edge to PCT
bottom: 1615mm
Width: 2248mm
IWB bottom
to ground (X)

Roll Type PCT User Manual
15
3. Therefore, the projector wall mount position can be defined based upon 2 & 3 above.
Height: 1295mm
Projector wall
mount upper
edge to PCT
bottom: 1615mm
Width: 2248mm

Roll Type PCT User Manual
16
3-2 138” ROLL TYPE PCT + Suggested Projector
Step 1. Define Projector Wall Mount Position
1. Define Projector Wall Mount vertical Position.
1-a. The distance (X) between Interactive White Board bottom and ground will be based upon main users (children or adult).
Width: 3282mm
Height: 1295mm

Roll Type PCT User Manual
17
1-b. X + 1748 mm will be the distance between projector wall mount and ground. (That is the height of wall mount)
2. Define Projector Wall Mount horizontal Position.
According the environment and determine the expected Image Center position, then right edge of the wall mount should be 13mm away from
the expected image center line. (That is the horizontal position of wall mount)
Height: 1295mm
Projector wall
mount upper
edge to PCT
bottom: 1748mm
Width: 3282mm

Roll Type PCT User Manual
18
3. Therefore, the projector wall mount position can be defined based upon 2 & 3 above.
Projector wall
mount upper
edge to PCT
bottom: 1748mm
Height: 1295mm
Width: 3282mm

Roll Type PCT User Manual
19
3-3 Wall Plate Installation
Wall plate is aligned with the wall mount top-left mark, then mark drill holes position.
Drill holes at the ‘marked position’ with an electric drill and drilling bit.
Level wall plate using attached bubble level.
Keep level wall plate before fastener screws.
NOTE:
Uses bit according wall material.

Roll Type PCT User Manual
20
3-4 Cable Management
1. Insert all cables (HDMI/VGA/Power cord) inside the arm.
2. Direct all cables toward designated position (wall or devices).
Ex: VGA cable /HDMI cable/Power cord
3. Install arm on wall mount plate.