Orion PREMIUM SERIES User manual

Installation and User’s Guide
Installation and User’s Guide
PREMIUM SERIES LCD MONITOR
8.4” TFT-LCD MONITOR
(SECURITY)
http://www.orionimages.com
All contents of this document may change without prior notice, and actual product appearance may differ
from that depicted herein

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
Warning Statements
* Follow this safety instruction to use the monitor properly and prevent the damages.
* This safety instruction has “ Warning” and “ Caution” as below.
WARNING: If the user does not follow this instruction,
it may cause the serious damage to the user.
CAUTION: If the user does not follow this instruction, it may cause the slight
damage to the user or cause some damages to the monitor.
* Keep this user’s guide book for later use.
Never remove the back over and touch
the inside of the monitor. If you need a
service, please contact the service center.
Keep away the monitor from the
direct sunlight and a heating appliance.
Connect the power code to the wall
outlet tightly. If the power code or plug are
defective and the wall outlet is not tight,
p
lease do not use them.
Never push objects of any kind into this
product as they may result in a risk of fire
or electric shock.
2 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg2

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
Warning Statements
Do not install this monitor on the outside
and near water. If may cause damage to
the product, electric shock and fire.
For cleaning do not use liquid cleaners.
Never touch the power plug with wet-
hands.
When lightning and thundering, unplug
the monitor from the wall outlet and never
touch it.
Unplug this product from the wall outlet,
when It does not operate for a long time.
When smoking and noising from the
monitor, unplug the product from the wall
outlet and contact a service center.
How to fix
1. Do not open this product as it contains high voltage inside.
2. It may create an electric shock.
3. It the user disassembles and remove the back cover, it does not make sure
4. To make up for the damages and do a service and exchange the monitor..
3 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg3

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
Cautions
Install this monitor some distance
From the wall and do not install unless
Proper ventilation is provided.
Place this product on a stable place.
If not, it may fall, causing serious
Damages to the monitor and people.
The openings must not be blocked by
curtain, rug or other similar surface. When carrying this monitor, be careful
not to damage the panel and drop it
It may cause some trouble.
Take the power plug out from the wall
outlet. Do not pull the cable. It may
snap the inner wires and cause
overheating and fire.
Before carrying the monitor, tum it off
and Unplug the signal cables and the
power code From the wall outlet.
Install this monitor about 50cm far from
the eyes and an angle of 0~15 degrees
below eyes. Too close installation may
cause having weak sight.
Do not press the LCD panel with hands
or the sharpened material hardly.
For cleaning, unplug the monitor from
the Wall outlet. Do net use the liquid
cloth. Use the soft cloth.
Do not use the chemical liquid for
cleaning. It may cause fading and
breakage.
4 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg4

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
TABLE OF CONTENTS
.................................................................................................................
1. INSTALLATION 6
……....................................................................................................................
1.1 Parts
6
…..…..........................................................................................................
1.2 Connection
7
…..................................................................................................................
2. FEATURES 8
…….……..............................................................................................
2.1 Specifications 8
3. OSD SETTING ............................................................................................................ 9-11
..
....
.
.......................................................
................
.........................
4. CONTROL BUTTON 12
..
....
.
.......................................................
................
.........
5. INFORMATION TO THE USER 13
..
....
.
.......................................................
.................
....................
6. TROUBLESHOOTING 14
..
....
.
.......................................................
.................
...
7. LIMITED LIFETIME WARRANTY 15
5 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg5

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
INSTALLATION
1.1 P
a
r
ts
Remove the package cover and place the product on a flat and secure surface or in the
installation location. Check whether all the following device and accessories are included with
the main system.
6 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg6

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
INSTALLATION
1.2 Connection
1. DC 12V IN
2. RGB IN
3. VIDEO1 IN
4. VIDEO1 OUT
5. VIDEO2 IN
6. VIDEO2 OUT
7. S-VIDEO (Y/C) IN
8. S-VIDEO (Y/C) OUT
9. PC STEREO IN
10. TRIGGER IN
RGB signal input
Composite signal input for VIDEO1
Video looping output for VIDEO1
Composite signal input for VIDEO2
Video looping output for VIDEO2
Y/C separated signal input
Y/C separated signal looping output
NO / NC signal input
7 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg7

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
FEATURES
2.1 Specifications (15 Inch)
VIDEO
Screen Size 8.4”
Pixel Type Active Matrix TFT
Max. Resolution 800 x 600 @ 60Hz (SVGA)
Pixel Pitch 0.213 x 0.213mm
Brightness 220 cd/㎡
Contrast Ratio 500 : 1
Aspect Ratio 5:4
Viewing Angle (H/V) 130 / 110
Display Color 16.2 Million
Response Time < 35ms
Video System NTSC / PAL / SECAM
Frequency (H) 31 ~ 48KHz
Frequency (V) 55 ~ 75Hz
Panel Lamp Life 20,000hours
MECHANICAL
Packing Dimension
W x H x D 9.8” x 9.6” x 4.3”
Weight 4.85lbs
Power Consumption 15W
Power Source DC12V adapter (Auto Switching) / 1.5A
NOTE : Technical specifications are subject to change without notice..
8 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg8

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
OSD (On Screen Display) SETTING
3.1 OSD MENU Description
Menu Selection
1. Press the MENU key to access the Main menu.
2. Use the and arrow key to highlight a selection
3. Press the INPUT/SELECT key to select an item.
4. Use the and arrow key to highlight a selection.
5. Use the and arrow key to adjust the setting on a selected item.
NOTE : If you don’t connect RGB port, RGB SETUP menu is not select.
A. Input Select
Inputs can be set to VIDEO, S-VIDEO and RGB mode.
Press the SOURCE/ key then you can change the input source.
B. Picture Menu
9 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg9

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
OSD (On Screen Display) SETTING
1. Press the MENU key and then ▼/◀ or ▲/▶ key to select the PICTURE menu.
2. Press the INPUT / SELECT key and then ▼/◀ or ▲/▶ key to select the adjustment item you
need.
3.
Press the INPUT
/
SELECT
key to active the item.
EX) If you select the BRIGHTNESS, then the picture below appears on the screen.
4. Press the MENU key to move the previous menu..
C. Color Temp Menu
If you want to change of color value on RGB source,
1. Select COLOR MODE on RGB MENU.
2. Press the INPUT/SELECT key and then select COLOR TEMP.
3. Change the USER and then ▼/◀ or ▲/▶ key to select the adjustment item you
need.
4. Press the INPUT/SELECT key to active the item.
5. Press the MENU ke
y
to move the
p
revious menu.
10 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg10

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
OSD (On Screen Display) SETTING
D. Function Menu
1. TRIGGER MODE
.
2. TRIGGER INPUT
.
3. TRIGGER DWELL
. Sets the time how long displayed on the screen of trigger mode from 5 seconds to 60
seconds.
Select the input source of trigger mode. (VIDEO1 / VIDEO2 / S-VIDEO / RGB)
Sets the video input witch will be displayed when trigger signal. (OFF/ ON)
11 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg11

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
CONTROLL BUTTON
Menu/EXIT: Activates and exits the OSD.
SOURCE/ :
Select input source, and select the OSD menu.
AUTO/▲: Move the OSD menu and auto adjustment of RGB source.
▶/SELECT: Increase the level of volume and select the OSD menu.
◀ (VOL): Decrease the level of volume and move the previous menu.
Turns the power ON or OFF. There will be a few seconds delay
before the display appears.
The power LED(next to the power switch) lights with green when
the power is turned ON.
The power is turned off by pressing the power switch again and
the power LED goes Red.
12 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg12

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one more
of the following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
zConsult the dealer or an experienced radio / TV technician for help.
WARNING:
The manufacturer is not responsible for any Radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate
the equipment."
13 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg13

Installation and User’s Guide
htt
p
://www.orionima
g
es.com
TROUBLESHOOTING
* When the following troubles are occurred, follow the trouble shooting. Before contacting a
service center.
Troubleshooting Troubleshooting Tip
1. Make sure if the power supply is connected property
2. Turn on the power.
The screen doesn’t show up
3. Select the input signal right for the connected port.
The screen is too light or to dark Control the BRIGHTNESS
The screen size is not fit for the PC
signal Press the AUTO key among keys in the front.
(It is used only in the PC signal)
The screen color shows strange in
the PC signal In the FUNCTION menu of OSD menu, perform the AUTO-
ADJUST.
14 7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg14

15
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg15
Limited Lifetime Warrant
y
All Orion Images products carry a limited lifetime warranty from ship date against defects in
materials and workmanship. Orion Images is not liable for improper installation that results in
damage to mounts, adapters, display equipment or personal injury.
Contact Orion Images
In the event of missing and/or damage equipment, or technical questions, the
following information can help in the completion of the installation.
Address: 7300 Bolsa Avenue, Westminster, CA 92683
Tel: [phone] / Fax: [phone]
Email: [email protected]
Website: http://www.orionimages.com