Orion OPM-4240 User manual

Thank you for purchasing our MPDP.
Please read through this user's manual for safety before installing this product.
This product is manufactured for Multi Plasma display model only.
• 2009.05.21
A revolutionary MPDP
Infinitely Expandable MPDP
User’s Manual
OPM-4240 / OPM-4240R
A revolutionary MPDP
Infinitely Expandable MPDP
Address: 257-6, Gongdan-dong, Gumi-si, Gyeongsangbuk-do, Korea
Tel : [phone], Fax: [phone]
ORION PDP CO.,LTD.
www.oriondisplay.net

1
Infinitely Expandable
User's Manual Multi-Screen Control
System(MSCS) Guide Pin(4pcs) Handle (2 pcs)
RS232 Cable Bolt (4 pcs) DVI-D Cable Power Cable
Supplied Accessories
Features of MPDP
▶Enjoy a wide flat screen with high brightness and high quality.
▶Easy to install and move due to its thin design
▶ Enjoy your favorite programs with various split-screen features simultaneously presenting
several programs.
Thank you for purchasing our MPDP monitor.
This manual describes how to use the product and notes in use.
Please read the manual carefully before using it.
After reading this manual, please retain for future reference.
If you have any questions or a problem occurs, please contact either the company you purchased this
product from or an authorized service center.
※Displaying static picture for an extended period of time may cause an burn-in effect.
To prevent electric shock, Do not remove cover.
No user serviceable part inside
Refer servicing to qualified service personal.
Notice to users
Class A digital device
It is a device designed for business purpose with a safety certificate for electromagnetic interference, which
user should be mindful of.
Optional Accessories
MAIN FRAME
(refer to page 10~11)
RS-232C Distributor
Necessary for connecting more than 30 units.
1 Input, 6 Output
MF-Controller SET
PWR
DVD
CVBS
Y/C
B.CA
T.P.
STB
PC
DVI
DTV
PDP
REMOTECONTROL
MPDP
Enter
S1 S2 S3 S4
S5 S6 S7 SCR
Warning
If you fail to comply with the regulations for safety and proper use,
fire or injury may be caused.
Warning
" Important Safety Instructions"
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specied by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
The symbol in gure 21 shall be shown adjacent to the text of item 12 above.

2
OPM-4240 / OPM-4240R
3
Infinitely Expandable

※Pleasekeepfollowinginstructionfor
panelprotectionwithoutexception. ..............................................................4
1.SafetyPrecautions ..................................................................................................8
2.HowtoInstall ............................................................................................................10
3.GuidanceforUsers ..............................................................................................14
4.HowtoConnectCables ....................................................................................16
4.1. Connection of one set MPDP .................................................................................16
PC & DVI Connection .............................................................................................16
VCR Connection ......................................................................................................18
DVD Player & DTV Set top box connection .........................................................20
4.2. Connection of Multi-screen MPDP ........................................................................22
4.3. Connection of RS-232C Cable ..............................................................................24
4.4. Connection of 3 x 3 MPDP .....................................................................................25
4.5. ID setting of X x Y MPDP ........................................................................................26
5.SettingandoperationofMSCSsoftware ................................................27
5.1. Installation .................................................................................................................27
5.2. Start MSCS ...............................................................................................................28
5.3. Setting 'Com Port' ....................................................................................................29
5.4. "New design/Last design" setting ..........................................................................29
5.5. Multi-screen configuration ......................................................................................30
5.6. MSCS Instruction ....................................................................................................31
5.7. ID Setting ..................................................................................................................31
5.8. Configuration of various modes .............................................................................32
5.9. Setting multi screens at a time ...............................................................................33
5.10. Slide Control ...........................................................................................................34
5.11. Screen Control .......................................................................................................37
5.12. PC Tracking ..........................................................................................................38
5.13. Timer Control ..........................................................................................................39
5.14. BIC Control .............................................................................................................40
BIC status Indicator .................................................................................................42
Burn-In-Compensation Control Method ...............................................................43
BIC Intervals and effect ...........................................................................................43
How to Control BIC ...............................................................................................44
5.15. Orion PDP Home Page logon and Version information .....................................49
6.MSCSProtocol .......................................................................................................50
※Attachment : ASCII to HEX Conversion Table ..................................................64
※Hex code value according to Set ID ................................................................64
7.Othertips ....................................................................................................................65
7.1. Before calling for service ........................................................................................65
7.2. About Plasma display panel ...................................................................................66
8.Applicablesignals ................................................................................................67
8.1. DVD / DTV ...............................................................................................................67
8.2. PC & DVI...................................................................................................................67
9.Specifications ...........................................................................................................68

4
OPM-4240 / OPM-4240R

5
Infinitely Expandable


󱱝
-Shock/Impact on the set's sides will result in
internal circuit damages.
-The edge/bottom of the panel are fragile.
Use shock-absorbing pads or rugs for laying
down the product.
Please do not stand PDP•
alone. It may fall or slip
off and Panel can be
broken or damaged.
If you need to stand PDP, •
you must use handles on
the back and lean over
the PDP to avoid panel
touches ground or floor.
Please do not lean over•
the PDP. It may damage
the bottom part of the
PDP.
If you need to lay down•
PDP as face down
position, please use
shock-absorbing pads
under the PDP.
Please do not lean over the•
PDP toward the edge part.
It may damage the edge
part of the PDP.
If you need to lay down•
PDP as face up position,
please be cautious for
falling objects on the
surface of the PDP.
PANEL PANEL PANEL
PANEL
CUSHION
PANEL
󱱝


- This product can be damaged even with minor
impact for its nature.
Please keep following instruction to carry or
store the products.

6
OPM-4240 / OPM-4240R

7
Infinitely Expandable


UnlikeconsumerPDPproduct,thepanelofMPDPisexposedwithout
anyprotectivechassis.
Itneedsextracautiontocarryorinstalltopreventanyimpact.

ItalwaysneedstwopersonstocarryorinstallMPDP.
WhenyoucarryMPDPwithupstraightmanner,pleaseholdhandlesontheback
andbottompartofthepaneltogether.
Pleasebecarefulnottotouchthebottompartofthepanelwhenyouputdownthe
panel.
WhenyoucarryMPDPwithflatbedmanner,pleaseholdhandlesonthebackand
lowerpartoftheback.
Pleasebecarefulnottotouchthebottompartofthepanelwhenyouputdownthe
panel.
Please do not touch the panel with your hand.
Pleaseseepage8forunpackandhandleassembly.
PANEL
MASTER FRAME
It has to be handled with
care, because the panel
glass substrate is exposed
without side cover.
Although Panel is protected
with a Side cover, it is still
sensitive to the impact or
shock from outside.
OPM-4240• OPM-4240R•

8
OPM-4240 / OPM-4240R
9
Infinitely Expandable

Do not poke the front screen with sharp•
material. It may damage the screen and
may cause malfunction of the product.
Do not lean against the product or keep•
it leaned. It may cause injury or failure.
Do not put it at any place with much•
humidity, dust, oil, smoke or steam. It
may cause failure.
If you do not want to use the product•
for a long time, keep the power plug
unplugged to save electricity.
The socket-outlet should be installed•
near the equipment and be easily
accessible.
Do not put any heavy object on it.•
It may cause failure.
Do not pull out or hang down the•
connection cable. It may damage the
cord to cause fire or electric shock.
Pull out the power plug by holding the•
plug. Otherwise, it may damage the
power cord to cause fire or electric
shock.
Do not ride or step on the product It may•
cause breakage when fallen down.
When moving it, disconnect the•
connecting cable. Otherwise, it may
damage the cable to cause fire or
electric shock.
Install the product on safe and flat•
surface.
Do not put candles on the product. If the•
liquid flows inside the product. It may
cause electric shock or fire.
Do not touch product’s front surface with•
hand. Otherwise, the image quality can
be lowered.
If it operates abnormally, stop using it•
immediately.
Please refer to a specialized•
construction company for installing stand
or wall mount unit. Otherwise, damage
or injury may be caused.
Avoid any action to damage the power•
cord or power plug. It may cause fire or
electric shock.
Do not alter (or disassemble) the•
product. It may cause electric shock
since high voltage is flowing inside.
Do not place any liquid-containing•
container on it. If the inside is wet, it
may cause electric shock or fire.
Do not touch the device when lightning•
strikes.
Do not pull out the power plug with a wet•
hand. It may cause electric shock.
Do not install the product where it may•
be exposed to direct sunlight or near
any heating device. It may shorten the
product's life span or cause failure.
Do not put any foreign material into•
the product. It may cause a failure or
shorten the life span.
Do not install in an unstable location•
It may cause injury.
Do not exceed ratings of AC outlet•
or extension cords. It may cause failure.
Make sure the product is not covered•
with any object. If the ventilation hole is
blocked, the inside temperature may rise
to cause overheating resulting in fire.

10
OPM-4240 / OPM-4240R
11
Infinitely Expandable


Install this set only at a location where adequate ventilation is available. y
1.ProductispackedinaboxasshowninFigure1.
2.PleasecarefullyremovethePackingBagwithaknifeorapairofscissors.
※ Please check front and rear side before you cut the bag to prevent any damages
on panel or set.
3.Pleaseassemblehandleswiththeboltsthatareintheaccessoryboxtothe
rearsideasshowninthefigure.

1.2peopleholdeachhandleonproduct'sbackside.
2.Itneedstwopeopletocarryorinstallthisproduct.
Please hold the handles in the back and the front bottom part at the same time.
- Please do not grab the panel, but grab bottom of master frame when you carry or install the products.
- Please use gloves when you carry or install the products.
※Attention:
-Donotremovethepanelprotectionpaduntilasetiscompletelyinstalledonastandorawallhanger.
PleasecarefullyremovePanelprotectionpadtopreventanydamagesontheproduct.
-Please make sure to use panel protection when you move, carry or rent MPDP.
Handles
Packing Bag
[Figure 1]
[Figure 3]
[Figure 2]
[Figure 4]
Panel protection
Panel protection
Panel
Master frame
MPDP
Handles
Panel protection

12
OPM-4240 / OPM-4240R
13
Infinitely Expandable

Please secure minimum clearance as shown in the picture for adequate ventilation and technical service.

The set can be installed as shown below. y
(For further information, refer to the optional 'MAIN FRAME Installation and Setup Guide'.)

The set can be installed on the wall as shown below. y
(For further information, refer to the optional 'MAIN FRAME Installation and Setup Guide'.)

Please secure minimum clearance as shown in the picture for adequate ventilation and technical service.
Please do not install our product at following locations to protect the product and y
prevent possible malfunction.
- Places of vibration or shock: PDP set may fall and damaged
- Next or near to Sprinkler sensors: The sensors may detect heat from a set and sprinkler can be activated.
- Around high voltage power lines: Noise from the power line may affect screen images
- Around heating apparatus: PDP set may be overheated and damaged.
Please check the ystability of wall.
If the wall is not strong enough, reinforce the wall before installation.
Please connect all the cables to proper ports in a set before installation. y
Hanger
Hanger Bolt
PDP
MAIN
FRAME
Guide Pin
Guide Pin
Hanger
Hanger Bolt
PDP
MAIN
FRAME
WALL BRACKET

14
OPM-4240 / OPM-4240R
15
Infinitely Expandable


❶
❷
❸
❹
❺
❻
❼
❽
1. RS-232C
MPDP Control, Firmware Upgrade, 9pin D-sub
2. Video
Composite Signal
NTSC, PAL, SECAM
3. S-Video
S-Video Signal
NTSC, PAL, SECAM, 4pin Mini Din
4. Component
DVD Signal
DTV - YPbPr Signal
5. PC
Computer RGB Analog Signal, D-sub 15pin
6. DVI-D
TMDS Signal
7. ID Switch
Set ID Switch
8. RS-232C(BIC)
BIC Firmware Upgrade
9. AC Input
AC 100V ~240V, 50/60Hz

Example of ID Switch setting y
- You can set ID with 3 rotary switches as shown in the following figure.
y
❾
[PDP ID 01]
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
[PDP ID 15]
0
1
2
3
4
5
6
7
8
9
100 digit 10 digit single digit
100 digit 10 digit single digit
󱱝

󱱝

LED Indication Description
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
M-ON
M-STB
FAN
S-ON No Power.
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
M-ON
M-STB
FAN
S-ON Internal System Check after Power on.
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
M-ON
M-STB
FAN
S-ON System ready.
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
M-ON
M-STB
FAN
S-ON
Power ON by MSCS Program.
(M-ON and S-ON LEDs blink every other
second. Power on status)
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
M-ON
M-STB
FAN
S-ON
Power Off by MSCS Program.
(System ready).
M-ON(Master-ON) : IP Board Master Power On.
FAN : FAN POWER ON, IF Red LED on IP board is turned on, please check FANs.
※ To protect the product, power can be disconnected automatically when the fan is stopped.
M-STB(Master- Stand By) : IP Board Master Ready
S-ON(Slave-ON) : IP Board Slave Ready
LED ON OFF ON/OFF

16
OPM-4240 / OPM-4240R
17
Infinitely Expandable



MPDP and PC should be connected; a Com Port in a PC and RS-232C IN port in a y
MPDP is connected with supplied RS-232C cable.
MPDP On/Off or Screen adjustment can be controlled by MSCS (Multi-Screen Control y
System).
ID setting on the backside of MPDP must be identical with the ID setting in MSCS to y
control MPDP with a PC.
If you do not have Com Port, you need to use an USB converter for RS-232. Depending y
on manufacturers or models, converters may cause malfunction.
PC
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
RS-232C VIDEO
IN OUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT
IN OUT
Y
Pb
Pr
DVI-D PC
IN
IN
OUT
OUT
ID SELECT
M-ON
M-STB S-ON
FAN
0
1
2
3
4
5
6
7
8
9
[PDP ID 1]
ID switch must be set as ID 1 y
for one set use.
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
PC (MSCS) to control MPDP
RS-232C (Maximum 15m)
PC- analog connection (Maximum 5m)
DVI connection (Maximum 5m)
※ If you need longer connection, please use
DVI boosters or DVI fiber-optic cable.

18
OPM-4240 / OPM-4240R
19
Infinitely Expandable
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
RS-232C VIDEO
IN OUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT
IN OUT
Y
Pb
Pr
DVI-D PC
IN
IN
OUT
OUT
ID SELECT
M-ON
M-STB S-ON
FAN
0
1
2
3
4
5
6
7
8
9

PC(MSCS) to control MPDP
VCR
RS-232C (Maximum 15m)
S-Video connection (Maximum 5m)
Video connection (Maximum 5m)
[PDP ID 1]
ID switch must be set as ID 1 y
for one set use.
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9

20
OPM-4240 / OPM-4240R
21
Infinitely Expandable
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
RS-232C VIDEO
IN OUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT
IN OUT
Y
Pb
Pr
DVI-D PC
IN
IN
OUT
OUT
ID SELECT
M-ON
M-STB S-ON
FAN
0
1
2
3
4
5
6
7
8
9

In case input source is DVD(480p, 576p, 480i, 576i), select DVD in MSCS main screen. y
In case input source is DTV(720p, 1080i, 1080p), select DTV in MSCS main screen. y
PC(MSCS) to control MPDP
DVD Player & DTV Set top box
RS-232C (Maximum 15m)
Component connection (Maximum 5m)
• According to manufacturers, the indication
of DVD Component output port may vary; “Y,
PB, PR”, “Y, B-Y, R-Y” or “Y, CB, CR.”
• Component Input ports
You can get better image quality by
connecting DVD player to component input
ports as below.
Component ports of
the set Y Pb Pr
Video output ports
of DVD player
Y Pb Pr
Y B-Y R-Y
Y Cb Cr
• Caution for Component connection
In case component cables are not properly
connected, you may have bluish or redish
screen or even no screen images.

[PDP ID 1]
ID switch must be set as ID 1 y
for one set use.
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9

22
OPM-4240 / OPM-4240R
23
Infinitely Expandable

Recommended maximum set connection for Multi setting is shown in table below. y
If you need to connect more than described in the table, you have to use distributors.
Image quality can be affected by cable or signal quality. y
INPUTSOURCE Resolution Connection Remark
DVI 1600 x 1200 x 60HZ 9 sets
PC PC & DVI Resolution Reference 1 sets 67 page
DTV 720p, 1080i, 1080P 4 sets
DVD 480i, 480p, 576i, 576p 6 sets
VIDEO/S-VIDEO NTST, PAL, SECAM 6 sets
RS-232C 30 sets ORION Cable Only
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
RS-232C VIDEO
IN OUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT
IN OUT
Y
Pb
Pr
DVI-D PC
IN
IN
OUT
OUT
ID SELECT
M-ON
M-STB S-ON
FAN
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
RS-232C VIDEO
IN OUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT
IN OUT
Y
Pb
Pr
DVI-D PC
IN
IN
OUT
OUT
ID SELECT
M-ON
M-STB S-ON
FAN
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
RS-232C VIDEO
IN OUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT
IN OUT
Y
Pb
Pr
DVI-D PC
IN
IN
OUT
OUT
ID SELECT
M-ON
M-STB S-ON
FAN
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
RS-232C VIDEO
IN OUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT
IN OUT
Y
Pb
Pr
DVI-D PC
IN
IN
OUT
OUT
ID SELECT
M-ON
M-STB S-ON
FAN
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
RS-232C VIDEO
IN OUT
IN
OUT
S-VIDEO
IN OUT
COMPONENT
IN OUT
Y
Pb
Pr
DVI-D PC
IN
IN
OUT
OUT
ID SELECT
M-ON
M-STB S-ON
FAN
0
1
2
3
4
5
6
7
8
9
RS-232C
S-VIDEO
DVI
PDP1 PDP2 PDP3 PDP4 PDP5
PC (MSCS) to control
MPDP

24
OPM-4240 / OPM-4240R
25
Infinitely Expandable

Maximum use of RS-232 with Daisy Chain connection is y or less.
If you need additional connection, use RS-232 distributor.
ID 1
ID 6
ID 11
ID 2
ID 7
ID 12
ID 3
ID 8
ID 13
ID 4
ID 9
ID 14
ID 5
ID 10
ID 15
ID 16
ID 21
ID 17
ID 22
ID 18
ID 23
ID 19
ID 24
ID 20
ID 25
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C Distributor
RS-232C control PC
ID 1
ID 4
ID 7
ID 2
ID 5
ID 8
ID 3
ID 6
ID 9
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
RS-232C control PC DVI
DVI Signal Distributor
(UXGA : UP TO 250MHz)

26
OPM-4240 / OPM-4240R
27
Infinitely Expandable

Identity number (ID) indicates the location of each MPDP. y
When you look at the MPDP screens in front of MPDP. y
Recommended ID of X x Y screens
ID 1 ID 2 ID 3 ID 4 ID 5
ID 6 ID 7 ID 8 ID 9 ID 10
ID 11 ID 12 ID 13 ID 14 ID 15
ID 16 ID 17 ID 18 ID 19 ID 20
ID 21 ID 22 ID 23 ID 24 ID 25
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
PDP ID
1
PDP ID
2
PDP ID
3
PDP ID
4
PDP ID
5
PDP ID
6
PDP ID
7
PDP ID
8
PDP ID
9
PDP ID
10
PDP ID
11
PDP ID
12
PDP ID
13
PDP ID
14
PDP ID
15
PDP ID
16
PDP ID
17
PDP ID
18
PDP ID
19
PDP ID
20
PDP ID
21
PDP ID
22
PDP ID
23
PDP ID
24
PDP ID
25
MSCS Installation start screen.


Insert the Installation CD. y
You can see following installation start screen. y
Select proper version for your product and star installation y
y®®󱱪

1.DataforPicturecontrol,ManualTrackingandsoforthcanbereadbyclickingthe
rightbuttonofyourmouseonthedesiredMPDPsetfromMSCS.
Pleasedonotuseabovefunctiontogetherwiththeotherfunctions.
2.WhenyouoffACpower,executepoweroffbyMSCSfirstanddisconnectAC
powertosaveyourconfiguration.

[PDP ID 01]
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
100 digit 10 digit single digit

28
OPM-4240 / OPM-4240R
29
Infinitely Expandable
Main Image of MSCS (Multi Screen Control system)

MSCS is an application program needed to control MPDP. y
When you execute MSCS (v 4.2) for your product at the installation screen, it will create a new folder y
at C:\Program File\MSCS (v4.2) and an icon on your computer screen.
By double clicking the MSCS (v 4.2) icon, the initial screen image of MSCS (v 4.2) will be y
displayed as shown in the picture.
※InputsourceisnotdisplayedontheMSCSscreen,butitisindicatedbycolors.
※DVI:Yellow,PC:Green,DTV:Pink,DVD:Purple,S-VIDEO:Brown,VIDEO:Gray

Com Port connects or disconnects the communication between PC and MPDP. y
Connect MPDP to PC Com Port via RS-232C cable. y
Go to MSCS Menu → Communication and set Com Port. Click 'Connect' using mouse or press 'Ctrl+C' y
using keyboard.
In order to disconnect communication, click 'Disconnect' using mouse or press 'Ctrl+D' using keyboard. y
When you use USB-to-RS232C converters, you need to set Com Port again, because MSCS uses one y
of Com Port no. 1 to 30.

When Com Port is successfully connected, pop-up window for "New design/Last design" appears.
Click "Open New Design" to prepare new configuration. y
Click "Open Last Design" to go to last design before closing. y
New/Last Design Set
Communication SettingCommunication Setting

30
OPM-4240 / OPM-4240R
31
Infinitely Expandable

InputthenumbersofXandY
X is for the number of row and Y is for column. -
X and Y can be selected within the range from 1 to 15. The maximum MDPD quantity of MSCS -
control is 100 sets.
MPDP image of selected numbers of X and Y is displayed in the Screen configuration in one -
second after setting the number.
SelectoneofinputsourcesfromDVI,PC,DTV,DVD,S-VIDEO,or
VIDEO.
Executionoftheconfiguration.
When you click "PLAY"button after selecting input source from Source select and the numbers of -
X and Yin MPDP Configuration, the configuration of MPDP is generated as shown in the figure
below.
1
2
3
Screen Configuration Setting

Check "ALL PDP" to send data to all connected MPDP regardless of ID. y
In order to control power of specific MPDP, use "Power On/Off" button after selecting the specific MPDP. y

ID of MSCS(Multi Screen Control System) is set automatically. y
To send a command to the desired MPDP set, select ID of the MPDP from Screen Configuration. y
Select ID using right button of mouse. Selected ID is displayed with red square box. y
Example of MPDP ID Setting
(Input signal is DVI, Configuration is 3 by 3)
MPDP Control - Power On/Off
Pleasewaitforatleast10secondsbeforeexecuting"PowerOn"commandafter
thefirstACpowerconnection.Ifnot,itmaycauseabnormalbehavior.
PleasedisconnectACpowerandreconnectincaseofabnormalbehavior.

ID 1 ID 2 ID 3
ID 4 ID 5 ID 6
ID 7 ID 8 ID 9
※
Check the resolution of the input source. It is displayed at the upper right corner of the screen. -
Check the signal. If there is no input signal, "No signal" is displayed. -

32
OPM-4240 / OPM-4240R
33
Infinitely Expandable
SelectadesirableinputSourcein"SourceSelect"
Ex) Select "DVI" in "Source Select" -
Clickdesirablescreenwithleftbuttonofmousethenthescreenwould
beconvertedintoDVI.
Click the left mouse button on the screen that you want to change. Screen will be turned into -
DVI input screen.
Youcanconfigureotherscreensinthesameway.
Selected screen would be converted into DVD. -
1
2
3

You can configure various input sources as you want. y
DVI
PC
PC
PC
PC
PC
PC
PC
PC
DVI
PC
PC
PC
DVD
PC
PC
PC
DVD
Selectadesirableinputsourcein"SourceSelect"
Select "DVI" in "Source Select". -
Selectscreenswithleftbuttonofmouseanddragfromthefirstscreen.
SelectedscreenswouldbeconvertedintoDVI.
1
2
3

You can select multi screens at a time as you want. y
PC
PC
PC
PC
PC
PC
PC
PC
PC
DVI
DVI
PC
DVI
DVI
PC
PC
PC
PC

34
OPM-4240 / OPM-4240R
35
Infinitely Expandable

MPDP configuration that users set is displaying repeatedly. y
To use Slide Control, go to MSCS Menu → Control → Slide Control or press "Ctrl+S" using Keyboard. y
Makeadesirableconfigurationin"ScreenConfigurations"
Set"OperationTime"in"SlideControl"
Click "Add" button to save configuration. -
The range of "Operation Time" is from 10 seconds to 1 hour. -
1
2
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
Savevariousscreenconfigurationsinthesameway.
Click"SlideStart"todisplaysavedscreenconfigurations.
-Saved screen configurations are displaying for preset time.
Check"Repeat"todisplaysavedconfigurationrepeatedly.
4
3
5
PC
PC
PC
DVI
DVI
DVI
DVI
DVI
DVI
DVI
DVI
PC
DVI
DVI
PC
PC
PC
PC

36
OPM-4240 / OPM-4240R
37
Infinitely Expandable
Click"Stop"buttontoend"SlideControl"
SaveorLoadtheslideconfiguration
Click "SAVE" button to save user added Slide configuration as "*.ssd" file. -
Click "LOAD" button to open saved "*.ssd" file. -
7
6
※To view the saved screen configuration, select the list from "List Box."
※Saved screen protocol is transmitted to MPDP by double clicking the list.

Register values related to display of MPDP can be changed. y
Click "Picture Control" of "Control" menu bar or enter "Ctrl+P" in order to run "Picture Control" window. y
In order to control display values, input values directly in "Edit Box" and press Enter key. y
Or click -/+ button using mouse.
Click "Exit" button or press "Ctrl+X" using keyboard to close "Picture Control" window. y
Color Temp. y
Normal : Initial setting. Proper for normal video image view. -
Studio : Low Color temperature. Proper for broadcasting purpose. -
Picture Control
When you load "Slide File", previous slide configuration
and new slide configuration must be identical.
If they are different, the file cannot be loaded. So, revise
the new slide file configuration as previous configuration
or save as new file.
