Osaki OS-PRO Maestro User manual

Power Line x1
Seat base and backrest Footrest
Left side panel Right side panel
Allen key x1 Circlip x2Hex screws x10 Washer x10
(Back up : Hex screws X2
Washer X2)
Remove the packing, take out the parts.
1

Remove side panel cover by slightly pulling the cloth strip.
Connect the power supply and turn on the power switch.
2

Connect the footrest data line and air hose.
Hang the footrest on the seat base，then fix it with the buckle.
Install the footrest.
3

Align A on the armrest with B on the main unit. Then Insert the armrest
into the main unit.
Connect the data line and air hose.
Use four screws to fix the side panel.
A
B
Install the side panel.
4

Pat the edge with your hand to fix the side panel cover back to the
side panel.
Pull the two zippers between the footrest and seat base.
Pull the two zippers on the
seat pad.
Fix the waist cushion on the backrest
with the elastic belt.
Tidy the cushions.
5