oticon OPN User manual

BTE PP
BTE
Oticon Opn™
Oticon Opn S™
Oticon Opn Play™
Oticon Siya
Oticon Ruby
Instructions for use

Model overview
This booklet is valid for Oticon Opn™, Oticon Opn S™, Oticon Opn
Play™, Oticon Siya and Oticon Ruby families, in the following
hearing aid models:
BTE
BTE PP
Oticon Opn FW 6
Oticon Opn 1 GTIN: (01) 05707131340795
Oticon Opn 2 GTIN: (01) 05707131340818
Oticon Opn 3 GTIN: (01) 05707131340801
Oticon Opn S FW 8
Oticon Opn S 1 GTIN: (01) 05707131374967
Oticon Opn S 2 GTIN: (01) 05707131374974
Oticon Opn S 3 GTIN: (01) 05707131374981

Oticon Opn Play FW 8
Oticon Opn Play 1 GTIN: (01) 05707131374998
Oticon Opn Play 2 GTIN: (01) 05707131375001
Oticon Siya FW 1
Oticon Siya 1 GTIN: (01) 05707131340887
Oticon Siya 2 GTIN: (01) 05707131340894
Oticon Ruby FW 1
Oticon Ruby 1 GTIN: (01) 05707131378491
Oticon Ruby 2 GTIN: (01) 05707131378507

LED light for visual indication. Not available for Oticon Siya and
Oticon Ruby.
The LED light helps caregivers, parents, and teachers to operate
the hearing aid and to give instructions on relevant functions and
modes (see relevant information throughout the booklet).

Introduction to this booklet
This booklet gives you guidance on how to use and maintain your
new hearing aid. Please read the booklet carefully, including the
Warnings section. This will help you to get the most out of your
new hearing aid.
Your hearing care professional has adjusted the hearing aid to meet
your needs. If you have additional questions, please contact your
hearing care professional.
About Start-up Handling Options Tinnitus Warnings More info
For your convenience, this booklet contains a navigation bar to help
you easily navigate through the different sections.

Intended use
Intended use The hearing aid is intended to amplify and transmit
sound to the ear.
Indications for use Impaired hearing within mild to severe-to-profound
hearing loss.
Oticon Opn Play
Intended user
Infants, children and adults.
Intended user Adults and children older than 36 months.
User environment Indoor and outdoor.
Contraindications Users of active implants must pay special attention
when using the hearing aid. For more information read
the Warnings section.
Clinical benefits The hearing aid is designed to provide better speech
understanding to help ease communication with the
aim of improving quality of life.

IMPORTANT NOTICE
The hearing aid amplification is uniquely adjusted and optimised
to your personal hearing capabilities during the hearing aid fitting
performed by your hearing care professional.

Table of contents
Continues on next page
About
Your hearing aid and earpiece 10
Identify left and right hearing aid 14
MultiTool for handling batteries and cleaning 15
Start-up
Turn the hearing aid ON and OFF 16
When to replace the battery 17
How to replace the battery (size 13) 18
Handling
Put on the hearing aid with sound hook 20
Caring for the hearing aid 21
Put on hearing aid with thin tube 24
Clean the thin tube 25
Replace standard earpieces 26
Clean customised earpieces 28
Replace ProWax filter 29
Flight mode 30

Table of contents
Options
Optional features and accessories 31
Change program 32
Change volume 34
Mute 36
Use hearing aid with iPhone and iPad 37
Wireless accessories 38
Other options 40
Tamper-resistant battery drawer 42
Tinnitus
Tinnitus SoundSupport™ (optional) 44
Guidelines for tinnitus sound generator users 45
Sound and volume adjustment 46
Limitation on use time 49

Warnings
Tinnitus SoundSupport warnings 52
General warnings 53
More info
Troubleshooting 60
Water and dust resistant (IP68) 62
Conditions of use 63
Technical information 64
Warranty 73
Your individual hearing aid settings 74
Sound and LED indicators 76

10 About Start-up Handling Options Tinnitus Warnings More info
Your hearing aid and earpiece
There are two different attachments and several different
earpieces available for the hearing aid.
Mould
Tube
Sound
hook
About
With sound hook and
mould earpiece
With thin tube
(Corda miniFit)
Ear grip (optional)
Thin
tube

11
Standard earpieces Customised earpieces
Please see details for replacing the dome in
chapter “Replace standard earpieces”.
*only for Corda miniFit 0.9mm
**not for open dome
Power dome
Grip Tip
Available in small and large, left and
right, with or without vent.
Bass dome, single vent
Bass dome, double vent
The thin tube uses one of the following earpieces:
LiteTip
Micro mould
Open dome
6 mm5 mm* 8 mm 10 mm 12 mm**
Dome sizes

12 About Start-up Handling Options Tinnitus Warnings More info
With sound hook and mould
What it is and does
Push button
Mute, change
volume and
programs
LED
(optional)
Program,
volume, and
battery status
Nail grip
Open the
battery drawer
Battery drawer
Contains the battery and functions
as an on/off switch
Sound hook
Tube
Brings sound
into the ear
Mould
Holds the
hearing aid
in the ear
Sound out
Microphone
openings
Sound in

13
With thin tube
What it is and does
Battery drawer
Contains the battery.
Functions as an on/off switch
Thin tube
Brings sound
into the ear
Nail grip
Open the
battery drawer
Push button
Mute, change
volume and
programs
LED
(optional)
Program,
volume, and
battery status
Microphone
openings
Sound in

14 About Start-up Handling Options Tinnitus Warnings More info
Identify left and right hearing aid
It is important to distinguish between the left and the right
hearing aid as they may be programmed differently.
You can find left/right colour indicators in the battery drawer.
Indicators can also be found on Micro moulds and moulds (optional).
A RED indicator marks the
RIGHT hearing aid
A BLUE indicator marks
the LEFT hearing aid

15
IMPORTANT NOTICE
The MultiTool has a built-in magnet. Keep the MultiTool at least 30 cm
away from credit cards and other magnetically sensitive devices.
MultiTool for handling batteries and cleaning
The MultiTool contains a magnet that makes it easier to replace
the battery in the hearing aid. It also contains a brush and wire loop
for cleaning and removing earwax. If you need a new MultiTool,
please contact your hearing care professional.
Brush
Wire loopMagnet

16 About Start-up Handling Options Tinnitus Warnings More info
Turn the hearing aid ON and OFF
The battery drawer is also used to switch the hearing aid on and
off. To save battery life, make sure your hearing aid is switched off
when you are not wearing it. If you wish to return to the standard
settings of the hearing aid, simply open and close the battery
drawer (quick reset).
Optional LED
Two long green flashes indicate that the hearing aid is turned on.
Turn ON
Close the
battery
drawer with
the battery
in place
Turn OFF
Open the
battery drawer
Start-up

17
When to replace the battery
When it is time to replace the battery, you will hear three tones
repeated in moderate intervals until the battery runs out.
Three alternate tones*
= The battery is running low
Four descending tones
= The battery has run out
Battery tip
To make sure the hearing aid is always working, bring spare
batteries with you, or replace the battery before you leave home.
Optional LED
Continuous red flashes indicate low battery.
* Bluetooth® will be turned off and it will not be possible to use wireless accessories.
Note: Batteries need to be replaced more often if you are streaming to your hearing aid.

18 About Start-up Handling Options Tinnitus Warnings More info
How to replace the battery (size 13)
2. Uncover 3. Insert
Fully open the
battery drawer.
Remove the battery.
Remove the sticky
label from the +side
of the new battery.
Tip:
Wait 2 minutes so that
the battery can draw
air, to ensure optimal
functioning.
Insert the new
battery into the
battery drawer.
Insert it from above,
NOT from the side.
Make sure the + side
is facing up.
1. Remove

19
MultiTool
Close the battery drawer. The
hearing aid will play a jingle
through the earpiece.
Hold the earpiece close to
your ear to hear the jingle.
The MultiTool can be used to
change the battery. Use the
magnetic end to remove and insert
batteries.
The MultiTool is provided by
your hearing care professional.
4. Close Tip

20 About Start-up Handling Options Tinnitus Warnings More info
Handling
Put on the hearing aid with sound hook
Read the following pages if you have a hearing aid with a sound
hook and mould.
The mould is
customised for you
and fits your ear
shape. The moulds
are unique for the
left or the right ear.
Gently pull your ear
outwards and press
the mould in the
direction of the ear
canal, twisting it
slightly.
Place the hearing aid
behind your ear.
Step 1 Step 2