oventrop Aktor M ST L User manual

Valves, controls + systems
Operating instructions
EN Electromotive actuator
"Aktor M ST L ", 24 V, 0 - 10 V

“Aktor M ST L 24V” Contents
3
101271784-V02.01.2020
1. General information ................................................................................................................5
1.1 Validity of the operating instructions .........................................................................................5
1.2 Type plate ..................................................................................................................................5
1.3 Extent of supply ........................................................................................................................5
1.4 Contact......................................................................................................................................5
1.5 EU Declaration of conformity ....................................................................................................5
1.6 Used symbols............................................................................................................................5
2. Safety-related information......................................................................................................6
2.1 Correct use................................................................................................................................6
2.2 Warnings ...................................................................................................................................6
2.3 Safety notes ..............................................................................................................................6
2.3.1 Dangerincaseofinadequatepersonnelqualication............................................................................. 6
2.3.2 Risk of burns due to hot components and surfaces................................................................................ 6
2.3.3 Availability of the operating instructions ..................................................................................................6
3. Technical description ..............................................................................................................7
3.1 Construction..............................................................................................................................7
3.2 Functional description...............................................................................................................7
3.2.1 Normal operation ..................................................................................................................................... 7
3.2.2 Emergency end position ..........................................................................................................................7
3.3 Technical data ...........................................................................................................................7
4. Transport and storage.............................................................................................................8
5. Installation................................................................................................................................8
5.1 Initial installation........................................................................................................................8
5.2 CongurationoftheDIPswitches.............................................................................................9
5.3 Connectionofthepowersupply ...............................................................................................9
6. Operation ...............................................................................................................................10
6.1 Normal operation.....................................................................................................................10
6.2 Emergency control function ....................................................................................................10
7. Maintenance ..........................................................................................................................10
8. Removal and reinstallation...................................................................................................10
8.1 Removal ..................................................................................................................................10
9. Disposal..................................................................................................................................11
10. Appendix ................................................................................................................................12
Contents
Page

Contents “Aktor M ST L 24V”
4101271784-V02.01.2020

“Aktor M ST L 24V” General information
5
101271784-V02.01.2020
1. General information
Theoriginaloperatinginstructionsweredraftedin
German.
Theoperatinginstructionsinotherlanguageswere
translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the elec-
tromotive actuator "Aktor M ST L", 24 V, modulating
proportionalactuator,0-10V,withelectricemergency
control function and automatic recognition of neutral
point.
1.2 Type plate
The type plate is located on the bottom of the prod-
uct.
1.3 Extent of supply
Items included in the delivery:
• "Aktor M ST L", 24 V, modulating proportional
actuator, 0-10 V
• Operating instructions
1.4 Contact
OVENTROPGmbH&Co.KG
Paul-Oventrop-Straße1
59939 Olsberg
GERMANY
www.oventrop.com
Technical service
Phone:[phone]
1.5 EU Declaration of conformity
OventropGmbH&Co.KGherebydeclaresthatthis
product complieswiththebasicrequirementsand
other relevant provisions of the EC Directives con-
cerned.
The declaration of conformity can be obtained from
the manufacturer.
1.6 Used symbols
Important information and further explanations.
fAction required
• Enumeration
1.
2. Fixed order. Steps 1 to X.
ZResult of action

Safety-related information “Aktor M ST L 24V”
6101271784-V02.01.2020
2. Safety-related information
2.1 Correct use
Safety in operation is only guaranteed if the product
is used correctly.
TheAktormaybeusedasactuatorwithelectric
emergency control function and automatic recogni-
tion of neutral point in indoor heating, ventilation and
air conditioning systems.
Anyotheruseoftheproductwillbeconsidered
incorrect use.
Claims of any kind against the manufacturer and/
or his authorised representatives, due to damages
caused by incorrect use cannot be accepted.
The observance of the operating instructions is part
of the compliance terms.
2.2 Warnings
Eachwarningcontainsthefollowingelements:
Warning symbol
SIGNAL WORD
Type and source of danger
Possibleconsequencesifthedangeroccurs
orthewarningisignored.
fPossibilitiesofavoidingthedanger.
Thesignalwordsidentifytheseverityofthedanger
arising from a situation.
DANGER
Indicatesanimminentdangerwithhighrisk.
Thesituationwillleadtodeathorserious
injury if not avoided.
WARNING
Indicatesapossibledangerwithmoderate
risk. The situation may lead to death or seri-
ous injury if not avoided.
CAUTION
Indicatesapossibledangerwithlowrisk.It
may lead to minor and reversible injury if the
situation is not avoided.
NOTICE
Indicatesasituationwhichmayleadtodam-
age to property if not avoided.
2.3 Safety notes
Wehavedevelopedthisproductinaccordancewith
current safety requirements.
Pleaseobservethefollowingnotesconcerningsafe
use.
2.3.1 Danger in case of inadequate personnel
qualication
Anyworkonthisproductmustonlybecarriedoutby
qualiedtradespeople.
As a result of their professional training and experi-
enceaswellastheirknowledgeoftherelevantlegal
regulations,qualiedtradespeopleareabletocarry
outanyworkonthedescribedproductprofessional-
ly.
User
Theusermustbeinformedhowtooperatetheprod-
uctbyqualiedtradespeople.
2.3.2 Risk of burns due to hot components and
surfaces
fWear suitable protective clothing to avoid unprotect-
edcontactwithhotsystemcomponentsandttings.
2.3.3 Availability of the operating instructions
Anypersonworkingontheproducthastoreadand
apply these operating instructions and all other valid
documents.
The operating instructions must be available at the
installation location of the product.
fHandtheseoperatinginstructionsandallothervalid
documents over to the user.

“Aktor M ST L 24V” Technical description
7
101271784-V02.01.2020
3. Technical description
3.1 Construction
M30x1.5
A
51
75
06
86.5
64
Illust. 1: Side view
48.5
Illust. 2: Front view
3.2 Functional description
3.2.1 Normal operation
The actuator opens or closes the valve depending on
the applied control voltage.
Theactuatorcanbeadaptedtothespecicparame-
tersofthevalveusedwiththehelpofDIPswitches.
3.2.2 Emergency end position
The actuator features an energy store.
If the operating voltage fails, the stem of the actuator
willmovetotheemergencyendposition(seesection
6.3 on page 10).
3.3 Technical data
Operating voltage 24VAC±10%;50/60Hz;
24 V DC ±10 %
Power consump-
tion
Dimensioning:6.8VA(24V
AC);
3.3W(24VDC)
nominal:5.3VA(24VAC);
2.7W(24VDC)
Start up load For short periods max. 12 A
Drive Steady control 0 - 10 V DC;
<0.5mA
Connection Fixed pre-assembled cable
1.5 m; 5 x 0.5 mm2
Display LED display for operating volt-
age and status
Motor deactiva-
tion
Drive stem:
- extending = load-depend-
ent
- retracting = travel-depend-
ent
Piston stroke Max. 4 mm
Floating time 22 s/mm
Emergency oat-
ing time
about 5 s/mm
Operating power Nominal 150 N
Position indicator Stroke scale
Position feedback 2 - 10 V; DC, 5 mA
for 0 -100 % travel
Emergency con-
trol function
Emergency end position ad-
justable
Valve anti-block-
ing function
Active
Permissible uid
temperature in the
valve
0 °C - 120 °C
Ambient temper-
ature
0 °C - 50 °C
Ambient humidity 0 - 85% r.h., not condensing
Protection class IP54
Protective system Degree of protection
Installation posi-
tion
360°
Maintenance maintenance-free
Weight 250 g

Transport and storage “Aktor M ST L 24V”
8101271784-V02.01.2020
4. Transport and storage
Temperature
range
0 °C - 50 °C
Relative air hu-
midity
0 - 85% r.h., not condensing
Particles Store dry and free from dust
Mechanical inu-
ences
Protectedfrommechanical
agitation
Weather inuenc-
es
Do not store outdoors
Protectfromdirectsunlight
Chemical inu-
ences
Donotstoretogetherwith
aggressiveuids
5. Installation
5.1 Initial installation
Make sure that there is enough space for the
installationoftheactuatorwheninstallingthe
valve.
The actuator must only be connected to the
powersupplyafterinstallation!
CAUTION
Risk of burns due to hot components
Anunprotectedcontactwithhotcomponents
may lead to burns.
fAllowtheinstallationtocooldownbefore
workingonit.
fWear safety gloves.
3
6
0
°
Illust. 3: Installation position
1. Fit the actuator to the connection thread of the
valve.
2. Handtightenthecollarnut.
Avoid cross threading.
NOTICE
Damage to the actuator when tightening
the collar nut with excessive torque
The actuator can be damaged and its
be function impaired if the collar nut is
over-tightened.
fHandtightenthecollarnut.

“Aktor M ST L 24V” Installation
9
101271784-V02.01.2020
5.2 Conguration of the DIP switches
fRemove the casing cover.
fConguretheDIPswitchesaccordingtothevalve
used(seesection10 on page 12).
3
2
5
1
4
6
Illust. 4: DIP switches
(1) S1 ON/
OFF
Setting of the required stroke
behaviour in accordance with
the characteristic lines of the
valve used.
(2) S2 ON/
OFF
(3) S3 ON/
OFF
(4) S4 ON/
OFF
(5) S5 ON/
OFF
(6)
Setting of the emergency end position
ON = Stem
in retracted
position
OFF = Stem
in extended position
5.3 Connection of the power supply
NOTICE
Damage to the stem in unmounted state
If you operate the actuator electrically
withoutvalve,thestemmaybedamagedby
exceedingthedenedrangeofextension.
fOnly operate the product in mounted
state
Afterhavingconnectedthepowersupply,the
internalenergystorewillbechargedrstbefore
the actuator reacts.
Charging of the energy store generally has pri-
ority over the actuator functions.
1 2 3 4 5
24 V AC/DC
0 V AC/DC
Y = 0 - 10 V DC
0 V DC
U = 0 - 10 V DC
Illust. 5: Connection assignment
(1) 0VAC/DC-blue(BU)
(2) 24VAC/DC-brown(BN)
(3) Control0-10VDC-grey(GY)
(4) Positionfeedback0VDC-yellow(YE)
(5) Positionfeedback0-10VDC-green(GN)
fConnectthepowersupplyaccordingtothedesired
assignment in Illust. 5 on page 9.
ZTheenergystorewillbecharged.
ZAfterabout2.5minutes,theactuatorwillcarryout
an initialisation run and is ready for operation.
The supply voltage must not be interrupted
during the initialisation run.

Operation “Aktor M ST L 24V”
10 101271784-V02.01.2020
6. Operation
6.1 Status LED
1
Illust. 6: Status LED
(1) Status LED
The status LED is located under the casing cover
and displays the operating status of the actuator.
Status-LED Bedeutung
Flashing red Charging of the capacitors after
switchingon
Flashing green Initialisation run, recognition of neut-
ral point active
Lit green Operating voltage applied, normal
operation
Off Emergency control mode triggered,
no operating voltage
6.2 Normal operation
The actuator is automatically controlled via the con-
trol technology.
6.3 Emergency control function
ZIftheoperatingvoltagefails,theactuatorwillmove
to the set emergency end position.
ZOnce the operating voltage has been restored, the
energystorewillbechargedrst.
ZAfterthat,theactuatorwillfollowthesignalsofthe
control technology.
Theemergencycontrolfunctionwillonlybe
available after successful completion of the
initialisationrun(displayedbyaconstantlylit
green LED ).
7. Maintenance
The actuator is maintenance-free.
8. Removal and reinstallation
8.1 Removal
1
Illust. 7: Stroke position indicator
(1) Stroke position indicator of the actuator
CAUTION
Risk of burns due to hot components
Anunprotectedcontactwithhotcomponents
may lead to burns.
fAllowthevalvetocooldownbeforework-
ing on it.
NOTICE
It may not be possible to unscrew the
collar nut by hand
Without operating voltage, the actuator may
closethevalvewiththemaximumactuating
powerof200N.Inthiscase,thecollarnut
cannolongerbeunscrewedbyhand.
fDo not use pliers or similar to loosen the
collarnut!
1. SettheDIPswitch6to"ON"(seesection5.2 on
page 9).
2. Disconnecttheactuatorfromthepowersupply.
ZTheactuatorwillmovetotheupperstrokeposition.
3. Disconnect all electrical connections.
4. Loosen the collar nut.
5. Remove the actuator from the valve.

“Aktor M ST L 24V” Disposal
11
101271784-V02.01.2020
9. Disposal
Guideline 2012/19/EU WEEE:
Waste electrical and electronic equipment
(WEEE)mustnotbedisposedofwithdo-
mesticwaste,butmustbedroppedoffata
collection point for the recycling of electri-
cal and electronic appliances.
NOTICE
Risk of environmental pollution
Incorrectdisposal(forinstancewiththe
domesticwaste)mayleadtoenvironmental
damage.
fPackagingmaterialistobedisposedofin
an environmentally friendly manner.
fComponents are to be disposed of pro-
fessionally.
If no return or disposal agreement has been made,
the product has to be disposed of.
fIf possible, the components are to be recycled.
fComponents,whichcannotberecycled,aretobe
disposed of according to the local regulations. Dis-
posalwiththedomesticwasteisinadmissible.

Appendix “Aktor M ST L 24V”
12 101271784-V02.01.2020
10. Appendix
Settings of the DIP switches
Valve + actuator =
Valve type Model Control range DIPswitches DIPswitches
S1 S2 S3 S4 S5 S1 S2 S3 S4 S5
Cocon QTZ
PN 25
DN 10/15
30 - 210 l/h
30 - 90 l/h ON OFF ON OFF OFF
91 - 150 l/h OFF ON ON OFF OFF OFF ON ON OFF ON
151 - 210 l/h ON ON ON OFF OFF ON ON ON OFF ON
DN 10/15
150 - 700 l/h
150 - 250 l/h OFF OFF OFF ON OFF
251 - 500 l/h ON OFF OFF ON OFF OFF OFF OFF ON ON
501 - 700 l/h OFF ON OFF ON OFF ON OFF OFF ON ON
DN 15
200 - 1300 l/h
200 - 300 l/h ON ON OFF ON OFF
301 - 500 l/h ON ON ON OFF OFF ON ON ON OFF ON
501 - 900 l/h OFF OFF ON ON OFF OFF ON OFF ON ON
901 - 1300 l/h ON OFF ON ON OFF ON ON OFF ON ON
DN 20
250 - 1800 l/h
250 - 400 l/h ON ON OFF ON OFF
401 - 800 l/h OFF ON ON OFF OFF OFF ON ON OFF ON
801 - 1100 l/h OFF OFF ON OFF ON OFF ON ON ON ON
1101 - 1500
l/h
OFF ON ON ON OFF OFF OFF ON ON ON
1501 - 1800
l/h
ON ON ON ON OFF ON ON OFF ON ON
DN 25
400 - 2500 l/h
400 - 700 l/h OFF OFF OFF OFF ON
701 - 1100 l/h OFF ON ON OFF OFF OFF ON ON OFF ON
1101 - 2100
l/h
ON OFF OFF OFF ON ON OFF ON ON ON
2101 - 2500
l/h
OFF ON OFF OFF ON ON ON OFF ON ON
DN 32
600 - 4800 l/h
600 - 800 l/h ON ON OFF OFF ON
801 - 2800 l/h OFF OFF ON OFF ON OFF ON ON ON ON
2801 - 4800
l/h
ON OFF ON OFF ON ON ON ON ON ON
Cocon 2TZ
kvs = 0.45 0.25 U. OFF ON OFF OFF OFF
0.26 - 4 U. ON OFF OFF OFF OFF
kvs = 1.0 0.5 - 1U. OFF ON OFF OFF OFF
1.1 - 4.5 U OFF OFF ON OFF ON
kvs = 1.8 0.5 - 7 U. OFF ON OFF OFF OFF
kvs = 4.5 0.75 - 1 U. OFF OFF ON OFF ON
1.1 - 7 U. ON OFF ON OFF ON
HycoconHTZ
DN 15
kvs = 1.7
0.5 - 0.75 U. ON ON OFF OFF OFF
0.76 - 3 U. OFF ON OFF OFF OFF
DN 20
kvs = 2.7
0.5 - 0.75 U. ON ON OFF OFF OFF
0.76 - 1.5 U. OFF OFF ON OFF ON
1.6 - 3 U. ON OFF ON OFF ON
DN 25
kvs = 3.6
0.5 - 0.75 U. OFF OFF ON OFF OFF
0.76 - 1.0 U. ON ON OFF OFF OFF
1.1 - 1.5 U. OFF ON OFF OFF OFF
1.6 - 3.0 U. OFF OFF ON OFF ON
3.1 - 3.5 U. OFF OFF OFF OFF OFF
DN 32
kvs = 6.8
0.5 U. OFF OFF ON OFF OFF
0.6 - 1.0 U. ON ON OFF OFF OFF
1.1 - 2.0 U. OFF ON OFF OFF OFF
2.1 - 3.0 U. ON OFF OFF OFF OFF
3.1 - 4.0 U. OFF OFF OFF OFF OFF
DN 40
kvs = 10
0.5 - 0.75 U. ON ON OFF OFF OFF
0.76 - 1.5 U. OFF ON OFF OFF OFF
1.6 - 2.5 U. ON OFF OFF OFF OFF
2.6 - 4.0 U. OFF OFF OFF OFF OFF
Productsof
other manufac-
turers
(M30x1.5,
s=11.8mm)
Valve stroke h
h = 0.5 mm OFF OFF ON OFF OFF
h = 1.0 mm ON ON OFF OFF OFF
h = 2.0 mm OFF ON OFF OFF OFF
h = 3.0 mm ON OFF OFF OFF OFF
h = 4.0 mm OFF OFF OFF OFF OFF

OVENTROP
GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
www.oventrop.com 101271784 V02.01.2020