Panasonic MX-EX1031 User manual
VZ50V324
MX0222L0
RA·SN·SG
VZ50M324
© Panasonic Taiwan Co., Ltd. 2022
Printed in China
Panasonic Taiwan Co., Ltd.
https://www.panasonic.com
VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 4VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 4 2021/11/11 14:29:562021/11/11 14:29:56
English
VIỆT NAMภาษาไทย
Model No. MX-EX1031
M X-E X1011
MX-EX1001
Operating Instructions
(ำ�หับใ ้
ภ�ยในคัวเือน)
Hướng Dẫn Sử Dụng
Máy xay sinh tố (Dùng trong gia đình)
Blender (Household Use)
MX-E X10 01 M X-E X1011 MX-E X1031
VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 1VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 1 2021/11/11 14:29:572021/11/11 14:29:57
EN2
Safety Precautions .............................................................................................................................. EN2
Important Information......................................................................................................................... EN4
Parts Names and Instructions ........................................................................................................... EN5
Before Use............................................................................................................................................ EN5
How to Use ........................................................................................................................................... EN6
Cleaning and Care ............................................................................................................................... EN7
Safety Lock ......................................................................................................................................... EN7
Overload and Overheating Protection .............................................................................................. EN7
Troubleshooting .................................................................................................................................. EN8
Specications ...................................................................................................................................... EN8
Safety Precautions
Please make sure to follow
these instructions.
WARNING
To avoid risk of electric shock, re due to short circuit, smoke, scald or injury.
●
Do not allow infants and children to play with packaging material.
(It may cause suocation.)
●
Do not disassemble, repair or modify this appliance.
É
Contact Panasonic Service Centre for inspection or repair.
●
Do not damage the power cord or power plug.
Following actions are strictly prohibited:
Modifying, touching on or placing near heating elements or hot surfaces, bending, twisting,
pulling, hanging
/
pulling over sharp edges, putting heavy objects on top, bundling the power cord
or carrying the appliance by the power cord.
To reduce the risk of personal injury, electric shock or re, please observe the following:
■
The following signals indicate the degree of harm and damage when the product is misused.
■
The symbols are classied and explained as follows.
WARNING:
Indicates potential hazard that could result in serious injury or death.
CAUTION:
Indicates potential hazard that could result in minor injury or property damage.
This symbol indicates prohibition.
This symbol indicates requirement that must be followed.
Thank you for purchasing this Panasonic product.
●
Please read these instructions carefully to use the product correctly and safely.
●
Before using this product please give your special attention to “Safety Precautions” and
“Important Information” (P. EN2 - EN4).
●
Please keep this Operating Instructions for future use.
●
Panasonic will not accept any liability if the appliance is subject to improper use, failure to comply with
these instructions.
Contents
VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 2VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 2 2021/11/11 14:29:572021/11/11 14:29:57
EN3
English
●
Do not plug or unplug the power plug with wet hands.
●
Do not use the appliance if the power cord or power plug is damaged or the power plug is
loosely connected to the outlet.
➜
If the power cord is damaged, it must be replaced by the manufacturer, its service centre or
similarly qualified person in order to avoid a hazard.
➜
Insert the power plug firmly.
●
Do not immerse the motor housing, power cord or power plug in water, or splash it with
water and
/
or any liquid.
●
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
●
Keep the appliance and its power cord out of reach of children.
●
Dust o the power plug regularly.
➜
Unplug the power plug, and wipe with a dry cloth.
●
Discontinue using the appliance immediately and unplug in the unlikely event that this
appliance stops working properly.
e.g. for abnormal occurrences or breaking down
●
The power plug or the power cord become abnormally hot.
●
The appliance power fails.
●
The motor housing is deformed, has visible damage or is abnormally hot.
●
There is crack on the blender jug or other parts.
●
There is an unpleasant smell.
●
There is abnormal turning noise while in use.
●
There is another abnormality or failure.
➜
Contact Panasonic Service Centre for inspection or repair.
●
Make sure the voltage indicated on the label of the appliance is the same as your local supply.
Also avoid plugging other devices into the same outlet to prevent electric overheating. However,
if you are connecting a number of power plugs, make sure the total wattage does not exceed the
rated wattage of the outlet.
●
Be careful if hot liquid is poured into the blender jug as it can be ejected out of the
appliance due to a sudden steaming.
WARNING
●
Do not use the appliance on the following places.
●
On uneven surfaces, on carpets or tablecloths etc.
●
Place where it may be splashed with water or near a heat source.
●
Near any open water such as bathtubs, sinks, or other containers.
●
Near a wall or furniture.
➜
Place the appliance on a firm, dry, clean flat worktop.
To avoid risk of electric leakage, electric shock, re due to short circuit, scald, injury or property damage.
CAUTION
VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 3VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 3 2021/11/11 14:29:572021/11/11 14:29:57
EN4
●
Do not use the appliance outdoors.
●
Do not drop the appliance or attachments to avoid damaging it.
●
Do not wrap the power cord around the motor housing.
●
Make sure the parts or attachments are set rmly before use.
●
Do not operate the appliance without ingredients.
●
Be sure the mill gasket is attached properly to prevent leakage. (MX-EX1011, MX-EX1031 only)
●
Do not blend or place over 60 °C ingredients into the blender jug.
●
Do not put any liquids or wet ingredients into mill container. (MX-EX1011, MX-EX1031 only)
●
Do not open the lid and put your ngers or utensils such as spoon or fork into the blender
jug while the appliance is operating.
●
Do not stretch the gasket to avoid deforming.
●
Do not replace any parts of the appliance with non-genuine spare parts.
●
Do not carry the appliance by holding the power cord, blender jug or mill container.
●
Do not insert any object in the gaps of the appliance.
●
Do not blend more than the working capacity marked on the blender jug.
For the mill container, do not place more than the maximum quantity (MX-EX1011, MX-
EX1031 only). (P. EN8 "Specications")
●
Do not use prohibited ingredients as stated in this instructions. (P. EN5)
●
Do not push the safety lock pin with any implement such as thin stick, etc. (P. EN7)
●
Unplug the plug when the appliance is not in use.
●
Make sure to hold the power plug when unplugging it. Never pull on the power cord.
●
Beware not to trip over or get caught in the power cord while in use.
●
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and o by the utility.
●
Care shall be taken when handling the sharp blades, emptying the blender jug, mill
container and during cleaning. Do not clean the blender blade or mill blade by bare hand.
●
Always disconnect the appliance from the supply if it is left unattended and before
assembling, disassembling, moving or cleaning.
●
Switch o the appliance and disconnect from supply before changing attachments or
approaching parts that move in use.
●
Ensure to operate and rest the appliance as stated on specication table. (P. EN8
"Specications")
●
Ensure to clean the appliance especially surfaces in contact with food after use. (P. EN7
"Cleaning and Care")
●
This product is intended for household use only.
Important Information
CAUTION
Safety Precautions
Please make sure to follow
these instructions.
VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 4VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 4 2021/11/11 14:29:572021/11/11 14:29:57
EN5
English
●
Meat
●
Fish
●
Commercial ice cubes
●
Hard ingredients (e.g. dried beans, turmeirc, frozen food)
●
Sticky ingredients (e.g. peanut butter)
●
Ingredients with low water content (e.g. boiled potatoes)
Prohibited Ingredients
Foods
Maximum Quantity
Time
Pepper 20 g60 seconds
Dried chilies 20 g60 seconds
Coffee beans 50 g15 - 30 seconds
Guidelines of Maximum Quantity to be Placed in Mill Container
Blender Dry mill
(MX-EX1011, MX-EX1031 only)
●
Dice food first (1-2 cm), then blend with liquid.
●
Do not place ingredients with a maximum total volume exceeding
1 000 mL in the blender jug.
●
Do not operate more than 3 minutes at one time, rest about 1
minute before use again.
●
Do not place any ingredients more than 50 gin the mill container.
●
Do not operate more than 1 minute, rest about 2 minutes before
use again.
Handling Precautions Handling Precautions
Before Use
Clean all detachable parts before using the appliance for the rst time or when you have not used it for a while, and then
assemble them securely. (P. EN 6 “How to Use” and P. EN7 “Cleaning and Care” )
The dry mill is intended for
●
Grinding dry ingredients;
e.g. pepper, dried chillies, coffee beans, dried soy beans, dried
peas, seasame seeds, rice, wheat, nuts (shelled), breadcrumbs.
The blender is intended for
●
Blending fluids
e.g. fruit/vegetable juices, smoothie, soups, sauce.
●
Pureeing cooked ingredients
e.g. for baby foods. Note: Do not put any liquids or wet ingredients into mill container.
Rotary switch
Lid
Blender blade
Power plug
*
Power cord
Motor housing
Blender Dry mill
(MX-EX1011, MX-EX1031 only)
Working capacity
(Approximately 1 000 mL)
●
During blending, use the
scraper only through lid
opening. Do not use with
lid off.
Scraper
Accessory
Mill container
Mill gasket
Mill blade
Mill container base
Blender jug
Parts Names and Instructions
1ON (continuous operation)
0OFF
PPulse ( the blade rotates only while the switch is being
turned to "P" position)
●
Repeatedly turn and release for intermittent rotation.
*
The shape of plug may be dierent from illustration.
MX-EX1001 / MX-EX1011：1 set
MX -EX1031: 2 sets
VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 5VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 5 2021/11/11 14:29:592021/11/11 14:29:59
EN6
How to use the scraper
●
It can be inserted through the lid opening while blending without
interfering with the blender blade.
●
Slide the scraper through the lid opening and scrape to remove food sticking to blender jug sides.
●
To avoid ingredients splattering, it is recommended to insert the scraper from the lid opening
when using blender jug.
Scraper is useful when
●
too little liquid makes ingredients hard to blend. (e.g. for dips, sauces, curry dishes)
●
ingredients stick to the inner side of container. (e.g. garlic, chile pepper)
4
When blending is completed, turn the rotary switch to
" 0 " position to switch off. Unplug.
Turn the blender jug
anticlockwise to remove it,
open the lid and take out
the ingredients.
3
12
4
①
Align the
▲
on the motor
housing with the ▽ on the mill
container.
②
Twist mill container clockwise
until you hear a click sound.
Mill container only can be attached
by above steps.
4
When grinding is completed, turn the rotary switch to
" 0" position to switch off. Unplug.
Turn the mill container
anticlockwise to remove it,
open the mill container, and
take out the ingredients.
1
Turn the mill container upside down and place the
ingredients in it. Twist the mill container base
clockwise until you hear a click sound.
2
Attach blender jug to the motor housing.
Blender Dry mill
(MX-EX1011, MX-EX1031 only)
1
Place the ingredients into blender jug, and then close the lid.
To disassemble
Turn anticlockwise
●
Pour liquid first, followed by soft ingredients and then others.
(i) Liquid (ii) Soft ingredients (iii) Hard ingredients (iv) Ice cubes
①
Align the
▲
on the motor
housing with the ▽ on the
blender jug.
②
Twist blender jug clockwise
until you hear a click sound.
Blender jug only can be attached
by above steps.
3
Plug in. Hold the blender jug, and then turn the rotary
switch to " 1 " position to start.
●
If the appliance stops
during operation. (P. EN8)
●
If the appliance stops during
operation. (P. EN8)
2
Attach the mill container to the motor housing.
3
Plug in. Hold the mill container, and then turn the rotary
switch to "1" position to start.
How to Use
To assemble
Turn clockwise
Make sure the mill
gasket is not damaged
and placed properly
before assemble.
1
2
1
2
3
1
2
3
12
3
4
2
1
2
1
1
2
VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 6VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 6 2021/11/11 14:30:012021/11/11 14:30:01
EN7
English
The safety lock has been designed to prevent the blender from
switching on when blender jug or mill container is not properly in place.
●
Unplug before cleaning.
●
Clean the parts thoroughly after every use. Keep all parts clean and dry always.
●
Do not wash any part of the appliance in the dishwasher.
●
Do not use benzine, thinner, bleach, alcohol, nylon face of sponge, metal brushes or polish powder etc.
●
Some discoloration of the plastic parts may occur upon usage but it does not affect usage.
In case of overload and overheating, the protection device is triggered to stop operation and it is not abnormal.
After rotation stops, follow the below steps:
●
Do not use the appliance repeatly without any countermeasure.
1
Turn the rotary switch to "0" position, unplug the appliance.
2
Remove blender jug or mill container from motor housing.
Reduce the ingredients to less than half. (For blender jug, it also can add liquid.)
●
Remove the prohibted ingredient if used.
3
Reset the blender jug or mill container, start blending again. ( P. E N 6)
If the appliance still does not operate after performing the above, overheating protection has been activated.
Turn the rotary switch to "0" position, unplug and rest the appliance for about 15 minutes or more (until motor housing returns to a
normal temperature) to release overheating protection before using again.
(If appliance still does not operate, contact Panasonic Service Centre for inspection or repair.)
Safety lock pin
Cleaning and Care
Safety Lock
Overload and Overheating Protection
Motor housing
Wipe motor housing with a damp cloth.
Containers and other parts
Wash each part in cold or lukewarm water with a soft sponge.
Carefully clean blades with a brush.
Rinse and dry thoroughly.
(Brush is not provided.)
●
Remove the mill gasket before washing.
Mill container base
Carefully clean blades with a brush. Do not use water.
(Brush is not provided.)
Blender jug prewash
Add 400 mL clean water into the blender jug, plug in and blend for
about 1 minute.
Storing
●
Assemble the mill container base with the mill container. (MX-
EX1011, MX-EX1031 only)
●
Dry the lid thoroughly, then keep it separately.
VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 7VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 7 2021/11/11 14:30:022021/11/11 14:30:02
EN8
Blender & Dry mill
Even turn to "1"
position, the
appliance
does not start
blending.
●
The blender jug
/
mill container is not set properly.
➝
Make sure to align the marks on blender jug
/
mill container and motor housing, then twist
it firmly until you hear a "click" sound.
●
The mill container base is not assembled tightly. (MX-EX1011, MX-EX1031 only)
➝
Assemble it tightly. (P. EN6)
●
The protection device of overload or overheating is activated.
➝
Refer to “Overload and Overheating Protection” for inspection. (P. EN7)
●
The power plug is disconnected.
➝
Insert the power plug into outlet firmly.
Rotation stops
abruptly.
●
The protection device of overload or overheating is activated.
➝
Refer to “Overload and Overheating Protection” for inspection. (P. EN7)
There is abnormal
noise or vibration
increases.
●
Too much ingredients.
➝
Reduce ingredient amount.
●
The mill container base is not assembled tightly. (MX-EX1011, MX-EX1031 only)
➝
Assemble it tightly. (P. EN6)
The ingredient is
leaking.
(MX-EX1011, MX-
EX1031 only)
●
The mill container base is not assembled tightly.
➝
Assemble it tightly. (P. EN6)
●
The mill gasket is not attached or attached loosely.
➝
Attach it properly.
●
Foreign matters are attached to the mill gasket.
➝
Remove them.
●
The mill gasket is damaged.
➝
Contact Panasonic Service Centre to replace it.
Blender
The blade is idling.
●
The liquid amount is not enough.
➝
Add more liquid.
●
Too much ice cubes. (e.g. juice with a lot of ice)
➝
①
Remove blender jug after rotation stop completely.
②
Shake the blender jug gently.
When the blender is used When the dry mill is used
(MX-EX1011, MX-EX1031 only)
Power supply 220
-240 V 50
-60 Hz
Power consumption 230
-260 W
Rated time
Continuous operation (Repeat the cycle
of 3 minutes ON and then 1 minute OFF)
Continuous operation
(
Repeat the cycle
of 1 minute ON and then 2 minutes OFF
)
Working capacity
(approximately) 1 000 mL 50 g
Dimensions
(approximately)
W173 mm 148 mm
D161 mm 161 mm
H353 mm 257 mm
Mass. (approximately) 1.5 kg 1.3 kg
Check following points before calling or arranging for repair.
Problem Cause and Action
Troubleshooting
Specications
VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 8VZ50V324_MX-EX1001_MX-EX1011_EX1031 (EN+VN+TH).indd 8 2021/11/11 14:30:032021/11/11 14:30:03
VN2
VIỆT NAM
VN2
VN4
VN5
VN5
VN6
VN7
VN7
VN7
VN8
VN8
■
■
-
●
●
➜
●
VN.indd 2VN.indd 2 2021-11-11 11:08:182021-11-11 11:08:18
VN3
●
●
➜
➜
●
●
●
●
➜
●
➜
●
●
●
➜
VN.indd 3VN.indd 3 2021-11-11 11:08:182021-11-11 11:08:18
VN4
VIỆT NAM
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
VN.indd 4VN.indd 4 2021-11-11 11:08:182021-11-11 11:08:18
VN5
P
-
g
g
g
VN.indd 5VN.indd 5 2021-11-11 11:08:192021-11-11 11:08:19
VN6
VIỆT NAM
4
3
2
4
①
▽
②
4
1
2
1
①
▽
②
3
2
3
2
2
3
2
3
2
3
4
2
2
2
VN.indd 6VN.indd 6 2021-11-11 11:08:212021-11-11 11:08:21
VN7
1
2
3
VN.indd 7VN.indd 7 2021-11-11 11:08:222021-11-11 11:08:22
VIỆT NAM
➝
➝
➝
➝
➝
➝
➝
➝
➝
➝
➝
➝
➝
①
②
-
-
- W
mL g
mm mm
mm mm
mm mm
kg kg
VN.indd 8VN.indd 8 2021-11-11 11:08:232021-11-11 11:08:23
TH2
................................................................................................. TH2
......................................................................................................................... TH4
................................................................................................ TH5
............................................................................................................................. TH5
.......................................................................................................................... TH6
................................................................................ TH7
.......................................................................................................................... TH7
............................................................................ TH7
........................................................................................................................ TH8
.......................................................................................................................... TH8
■
■
●
●
●
●
●
●
➜
●
TH.indd 2TH.indd 2 2021-11-11 11:12:562021-11-11 11:12:56
TH3
ภาษาไทย
●
●
➜
➜
●
●
●
●
➜
●
●
●
●
●
●
●
●
➜
●
●
●
●
●
●
●
➜
TH.indd 3TH.indd 3 2021-11-11 11:12:562021-11-11 11:12:56
TH4
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
TH.indd 4TH.indd 4 2021-11-11 11:12:562021-11-11 11:12:56
TH5
ภาษาไทย
●
P
●
*
รูปร่างของปลั๊ก อาจจะแตกต่าง จากในรูปได้
●
●
●
●
●
●
●
●
●
●
●
●
●
●
TH.indd 5TH.indd 5 2021-11-11 11:12:572021-11-11 11:12:57
Other manuals for MX-EX1031
1
This manual suits for next models
2
Table of contents
Languages:
Other Panasonic Blender manuals
Panasonic
Panasonic MX-EX1081 User manual
Panasonic
Panasonic MX-SS1 User manual
Panasonic
Panasonic MX-EX1011 User manual
Panasonic
Panasonic MX-EX1021 User manual
Panasonic
Panasonic MX-101SP2WTB User manual
Panasonic
Panasonic MX-V310 User manual
Panasonic
Panasonic MX-SM1031 User manual
Panasonic
Panasonic MX-ZX1800 User manual
Panasonic
Panasonic MX-101SG1WTN User manual
Panasonic
Panasonic MX-XP101 User manual
Panasonic
Panasonic MX-ZX1800 User manual
Panasonic
Panasonic MX-MG5351 User manual
Panasonic
Panasonic MX-KM5060 User manual
Panasonic
Panasonic MX-GX1561 User manual
Panasonic
Panasonic MX-151SG2 User manual
Panasonic
Panasonic MX-EX1511 User manual
Panasonic
Panasonic MX-GS1WSK User manual
Panasonic
Panasonic MX-MC121P1 User manual
Panasonic
Panasonic KM5070 User manual
Panasonic
Panasonic MX-S101 User manual
