Panasonic KX-UT123 Manual

Panasonic KX-UT13X
Admin Guide
Schmooze Com Inc.
Panasonic
ABC
DEF
GHI
CONFERENCE
REDIAL
MESSAGE
HOLD
MUTE
AUTO
ANSWER
TRANSFER
CANCEL
SP-PHONE/
HEADSET
FLASH/
RECALL
PQRS
JKL
TUV
OPER
MNO
WXYZ
KX-UT136
DO NOT DISTURB
FORWARD/
12
11
10
9
4
3
6
7
8
5
2
1
24
23
22
21
16
15
18
19
20
17
14
13
23 JAN. 04:38PM MON
4703:UT136
ENTER
ENTER
ENTER
1
2
3
4
5
6
7
8
9
0
#
KX-UT123, KX-UT133 & KX-UT136

How To Find IP Address and MAC Address
Quick Steps
1. Press the “Setting” button.
2. Select “Information Display”.
3. Scroll down to see either the IP address or the MAC address.
© Copyright Schmooze Com, 2012
How To Set the Configuration Server
Quick Steps
1. Log into the Web Admin GUI of the phone.
2. Select the “Maintenance” tab at the top right.
3. Next select “Provisioning Maintenance”.
4. You can now specify the provisioning server information. In our example we are using
tftp://10.10.0.1/Config{MAC}.cfg (Reference the screen above).
How To Factory Default
Quick Steps
1.Log into the Web Admin GUI of the phone
2. Next select the “Maintenance” tab at the top right.
3. Now select “Reset to Defaults” on the left navigation menu.
4. Finally click the “Reset Web Settings” button to complete the reset.
Panasonic
KX-UT136
11 Jan. 01:36PM FRI
4702:UT136
Setting Call Log
Panasonic
KX-UT136
Back Enter
Key Click Tone
FWD/DND Setting
Language
Date and Time
Information Display
Panasonic
KX-UT136
Back
MAC Address
000000000000
Panasonic
KX-UT136
Back
IP Address
10. 4. 0.163

How To Find IP Address and MAC Address
Quick Steps
1. Press the “Setting” button.
2. Select “Information Display”.
3. Scroll down to see either the IP address or the MAC address.
How To Set the Configuration Server
Quick Steps
1. Log into the Web Admin GUI of the phone.
2. Select the “Maintenance” tab at the top right.
3. Next select “Provisioning Maintenance”.
4. You can now specify the provisioning server information. In our example we are using
tftp://10.10.0.1/Config{MAC}.cfg (Reference the screen above).
© Copyright Schmooze Com, 2012
How To Factory Default
Quick Steps
1.Log into the Web Admin GUI of the phone
2. Next select the “Maintenance” tab at the top right.
3. Now select “Reset to Defaults” on the left navigation menu.
4. Finally click the “Reset Web Settings” button to complete the reset.
KX-UT136 Status Network System VoIP Telephone Maintenance
Web Port Close
Status
Version Information
Network Status
VoIP Status
Version Information
Version Information
Model KX-TGP550T04
Operating BANK Bank2
IPL Version 01.02
Bank1: 12.12
Firmware Version Bank2: 12.12
Web Port Close
Maintenance
Firmware Maintenance
Provisioning Maintenance
Reset to Defaults
Restart
Provisioning Maintenance
Provisioning Maintenance
Enable Provisioning Yes No
Standard File URL http://10.10.0.1:2004/Config{MAC}.cfg
Product File URL
Master File URL
Cyclic Auto Resync Yes No
Resync Interval 10080 minute(s) [1-40320]
Header Value for
Resync Event check-sync
Save Cancel
KX-UT136 Status Network System VoIP Telephone Maintenance

How To Find IP Address and MAC Address
Quick Steps
1. Press the “Setting” button.
2. Select “Information Display”.
3. Scroll down to see either the IP address or the MAC address.
How To Set the Configuration Server
Quick Steps
1. Log into the Web Admin GUI of the phone.
2. Select the “Maintenance” tab at the top right.
3. Next select “Provisioning Maintenance”.
4. You can now specify the provisioning server information. In our example we are using
tftp://10.10.0.1/Config{MAC}.cfg (Reference the screen above).
How To Factory Default
Quick Steps
1.Log into the Web Admin GUI of the phone
2. Next select the “Maintenance” tab at the top right.
3. Now select “Reset to Defaults” on the left navigation menu.
4. Finally click the “Reset Web Settings” button to complete the reset.
© Copyright Schmooze Com, 2012
KX-UT136 Status Network System VoIP Telephone Maintenance
Web Port Close
Status
Version Information
Network Status
VoIP Status
Version Information
Version Information
Model KX-TGP550T04
Operating BANK Bank2
IPL Version 01.02
Bank1: 12.12
Firmware Version Bank2: 12.12
Web Port Close
Maintenance
Firmware Maintenance
Provisioning Maintenance
Reset to Defaults
Restart
Reset to Defaults
Reset Web Data
KX-UT136 Status Network System VoIP Telephone Maintenance
The Web data for this unit will be reset to it’s default values when you click [Reset Web Settings].
Reset Web Settings
Web Port Close
Maintenance
Firmware Maintenance
Provisioning Maintenance
Reset to Defaults
Restart
Provisioning Maintenance
Provisioning Maintenance
Enable Provisioning Yes No
Standard File URL http://10.10.0.1:2004/Config{MAC}.cfg
Product File URL
Master File URL
Cyclic Auto Resync Yes No
Resync Interval 10080 minute(s) [1-40320]
Header Value for
Resync Event check-sync
Save Cancel
KX-UT136 Status Network System VoIP Telephone Maintenance

Schmooze Com Inc.
http://schmoozecom.com
[phone]