Panasonic KX-TGP600 User manual

PANASONIC IP CORDLESS SYSTEM
(KX-TGP600 AND KX-TPA60)
Handset
Locator
button
Status Indicator
Using MessageBank®
• Dial 101 and follow the
prompts to customise your
settings or listen to your
messages.
The Message Indicator will ash
red if there are new messages.
Save a contact to the
Phonebook
Each handset has its own
phonebook which will need to
be set up for each phone.
• Use the soft key to select
Menu.
• Use navigation keys to scroll
to New Phonebook and use
soft key to select OK.
• Use the keypad ‘Enter Name’
of contact and use soft key to
select OK.
• Use the navigation keys to scroll
to the desired line entry and use
the soft key to select OK.
• Use the keypad to ‘Enter Phone
No’ and use soft key to select OK.
• When you have completed
all entries for a contact, use
the soft key to select SAVE.
Important – If you don’t select
SAVE before exiting the directory,
your changes will not be saved.
Basic Functions
A quick guide to the basics of your Panasonic IP DECT.
Place a call • Use the keypad to enter the other party’s phone
number, and press Talk/Speaker Phone.
End a call Whilst on an active call:
• Press Power/Cancel to end the call.
Hold a call Whilst on an active call:
• Press Hold/Msg.
Place a call on
Handsfree mode
Whilst on an active call:
• Press Talk/Speaker Phone.
Adjust call/
ringer volume
Whilst on an active call/on Standby mode:
• Use navigation keys Up/Down to adjust
call volume.
Mute/unmute
a call
Whilst on an active call/Standby mode:
• Use soft key to select MUTE to enable/disable
the handset microphone.
Note: MUTE mode is active if the icon is ashing.
View and call
from outgoing
log
Whilst on Standby mode:
• Use soft key to select Outgoing Log.
• Use navigation keys to scroll to desired contact and
press Talk/Speaker Phone to place the call.
View and call
from incoming
log
Whilst on Standby mode:
• Use soft key to select Outgoing Log.
• Use same soft key to select Incoming Log.
• Use navigation keys to scroll to desired contact and
press Talk/Speaker Phone to place the call.
View and call
from missed
calls
Whilst on Standby mode:
• Use navigation keys to scroll to the left and select
Missed Call.
• Use navigation keys to scroll to desired contact and
press Talk/Speaker Phone to place the call.
Undo typing • Press Xfer/Clr to undo typing.
Ringer/Charge
/Message Indicator
Headset Jack
Talk/Speaker Phone
Hold/Msg
Microphone
Soft Keys
Power/Cancel
Navigation
Keys
Receiver
Function
Xfer/Clr
(Transfer/Clear)

Internal Call Transfer
Transfer calls to another handset with the same
phone number.
Blind Transfer (transfer without announcing the
call to the party).
Whilst on an active call:
• Use the soft key to select Menu.
• Use the soft key to select Intercom to display
all the available handsets.
• Use the navigation keys to scroll to party’s handset.
• Use the soft key to select OK.
• Use the soft key to select OK again when the
party’s phone rings and complete the transfer.
Supervised Transfer (transfer after announcing
the call to the party).
Whilst on an active call:
• Use the soft key to select Menu.
• Use the soft key to select Intercom to display
available handsets.
• Use the navigation keys to scroll to party’s handset.
• Use the soft key to select OK.
• Wait till the other party answers, then announce
the call.
• Use the soft key to select OK again after the
party accepts the call and complete the transfer.
External Call Transfer
Transfer calls to another handset with a different
phone number.
Blind Transfer (transfer without announcing the
call to the party).
Whilst on an active call:
• Use the soft key to select BLIND.
• Use the keypad to enter the party’s phone
number. (Alternatively, use soft key to select
a contact from the Phonebook).
• Use the soft key to select OK.
• Use the soft key to select OK again and to
complete the transfer.
Supervised Transfer (transfer after announcing
the call to the party).
Whilst on an active call:
• Press Xfer/Clr to place the call on hold.
• Enter the phone number of the party you want
to transfer the call to.
• Use the soft key to select CALL.
• Wait till the other party answers, then announce
the call.
• Hang up the phone to complete the transfer.
If you have dialed the wrong transfer,
press Xfer/Clr to cancel the transfer
and re-enter the number.
Conference call
A maximum of 3 parties, including the caller/host,
can be connected to the conference at any time.
Whilst on an active call:
• Press FUNC, followed by 3:Conference.
• Use keypad to enter phone number of party you
wish to conference and use soft key to select CALL.
• When the call is answered, use the soft key to
select Conference to connect all parties into
the call.
If the call is unanswered, press Power/Cancel
and after a long beep, press Talk/Speaker Phone
to return to original call.
Call Forwarding
Call Forward – Always
• To activate: Call 72and when prompted, enter
the phone number you wish to forward calls to.
• Call Forward – Always is now active.
• To deactivate: Call 73.
Call Forward – Busy
• To activate: Call 90and when prompted, enter
the phone number you wish to forward calls to.
• Call Forward – Busy is now active.
• To deactivate: Call 91.
Call Forward – No Answer
• To activate: Call 92when prompted, enter
the phone number you wish to forward calls to.
• Call Forward – No Answer is now active.
• To deactivate: Call 93.
Call Waiting
• To activate: Call 43.
• Call Waiting is now active.
• To deactivate: Call #43.
134154 DEC15