Panasonic KX-TD816AL User manual

MODEL
KX-TD816AL / KX-TD1232AL
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic
Panasonic
D816
DIGITAL SUPER HYBRID SYSTEM
KX-TD816AL KX-TD1232AL
I
M
NSTALLATION
Please read this manual before connecting the
Digital Super Hybrid System.
ANUAL
Digital Super Hybrid System

2
Thank you for purchasing the Panasonic Model
KX-TD816AL/KX-TD1232AL, Digital Super Hybrid System.
System Components
Model No.
KX-TD816AL
KX-TD1232AL
KX-T7220AL
KX-T7230AL
KX-T7235AL
KX-T7250AL
KX-T7240AL
KX-TD160*1
KX-TD170AL
KX-TD180AL
KX-TD180DAL*3
KX-TD181AL*2
KX-TD181DAL*2/*3
KX-TD185AL
KX-TD192*2
KX-TD280AL
KX-TD281AL*2
KX-T30865
KX-A216*1
KX-A46
Service Unit
Telephone
Optional
Equipment
Description
Digital Super Hybrid System (Main Unit)
Digital Super Hybrid System (Main Unit),
including the KX-TD196 (Remote Card)
Digital Proprietary Telephone
Digital Proprietary Telephone with Display
Digital Proprietary Telephone with Large Display
Digital Proprietary Telephone
Digital DSS Console
Doorphone Card
8-Station Line Unit
4-CO Line Unit
4-CO Line Unit
8-CO Line Card
8-CO Line Card
4-DID Line Unit
System Inter Connection Card (two cards with
Connection Cable)
2-ISDN S0 Line Unit
4-ISDN S0 Line Card
Doorphone
Backup Battery and Adaptor Card
Battery Adaptor
System Components Table
Note The models marked *1can be installed only in KX-TD816.
The models marked *2can be installed only in KX-TD1232.
The models marked *3supports the Pay Tone service of your Central Office.
In this Installation Manual, the suffix “AL” of each model number is omitted.
The Digital Super Hybrid System is abbreviated as “DSHS.”
The Digital Proprietary Telephone is abbreviated as “DPT.”
A Single Line Telephone is abbreviated as “SLT.”

3
Important Information
This equipment should be used on PSTN lines requiring 2-wire Loop calling unguarded clearing
with Loop Disconnect or DTMF address signaling.
The equipment must be connected to direct extension lines and a payphone should not be
connected as an extension.
Operation in Power Failure
In the event of a power failure, single line telephones (SLTs) will be directly connected to
specific CO lines as follows:
KX-TD816 : CO 1 is connected to the extension jack 1
CO 2 is connected to the extension jack 2
CO 5 is connected to Power Failure Transfer jack
KX-TD1232 : three SLTs can be connected to CO 1, CO 2 and CO 9 which are connected
to Power Failure Transfer jacks
• Set the Dialing Mode (Tone or Pulse) of your telephone, according to the CO line.
• 114 and 000 can be dialed on the apparatus for the purpose of making outgoing calls to the
emergency (114) and (000) service.
Satisfactory performance can not be guaranteed for every allowed combination of host and
subsidiary apparatus.
114 and 000 can be dialed on the apparatus after accessing the CO line for the purpose of making
outgoing calls to the emergency (114) and (000) service.
During dialing, this apparatus may tinkle the bells of other telephones using the same line. This
is not a fault and we advise you not to call Fault Repair Service.
‘Prevention of access by user. This apparatus is intended to be accessible only to authorized
personnel. This apparatus must be installed in a locked room or similar environment, such that
user access is prevented. Failure to prevent such user access will invalidate any approval given
to this apparatus.’
Caution:
Do not push the PAUSE button more than twice following the initial access digit (or digits).
Failure to comply with this requirement may result in unsatisfactory operation.
Note:
No External TRC Terminal is provided due to an Internal Link between PE and TRC.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.

4
Attention
• The apparatus is designed to be installed and operated under controlled conditions
of ambient temperature and a relative humidity not greater than 60%.
• Avoid installing the apparatus in damp or humid environments, such as bathrooms
or swimming pools.
• The apparatus shall not be exposed to dripping or splashing.
• Keep the unit away from heating appliances and electrical noise generating devices
such as fluorescent lamps, motors and televisions. These noise sources can
interfere with the performance of the Digital Super Hybrid System.
• This unit should be kept free of dust, moisture, high temperature (more than 40˚C /
104˚F) and vibration, and should not be exposed to direct sunlight.
• Never attempt to insert wires, pins, etc. into the vents or other holes of this unit.
• If there is any trouble, disconnect the unit from the telephone line. Plug the
telephone directly into the telephone line. If the telephone operates properly, do not
reconnect the unit to the line until the trouble has been repaired. If the telephone
does not operate properly, chances are that the trouble is in the telephone system,
and not in the unit.
• Do not use benzine, thinner, or the like, or any abrasive powder to clean the
cabinet. Wipe it with a soft cloth.
WARNING
THIS UNIT MAY ONLY BE INSTALLED AND SERVED BY QUALIFIED
SERVICE PERSONNEL.
WHEN A FAILURE OCCURS WHICH RESULTS IN THE INTERNAL PARTS
BECOMING ACCESSIBLE, DISCONNECT THE POWER SUPPLY CORD
IMMEDIATELY AND RETURN THIS UNIT TO YOUR DEALER.
DISCONNECT THE TELECOM CONNECTION BEFORE DISCONNECTING
THE POWER CONNECTION PRIOR TO RELOCATING THE EQUIPMENT,
AND RECONNECT THE POWER FIRST.
THIS UNIT IS EQUIPPED WITH AN EARTHING CONTACT PLUG. FOR
SAFETY REASONS THIS PLUG MUST ONLY BE CONNECTED TO AN
EARTHING CONTACT SOCKET WHICH HAS BEEN INSTALLED
ACCORDING TO REGULATIONS.
THE POWER SOCKET WALL OUTLET SHOULD BE LOCATED NEAR
THIS EQUIPMENT AND BE EASILY ACCESSIBLE.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.

5
The serial number of this product may be found on the label affixed to the bottom
of the unit. You should note the serial number of this unit in the space provided
and retain this book as a permanent record of your purchase to aid in identification
in the event of theft.
MODEL NO.:
SERIAL NO.:
DATE OF PURCHASE
NAME OF DEALER
DEALER’S ADDRESS
For your future reference
Attention

6
Introduction
This Installation Manual provides technical information for the Panasonic Digital
Super Hybrid System, KX-TD816/KX-TD1232. It is designed to serve as an overall
technical reference for the system and includes a description of the system, its
hardware and software, features and services and environmental requirements.
This manual contains the following sections:
Section 1, System Outline.
Provides general information on the system including system capacity and
specifications.
Section 2, Installation.
Contains the basic system installation and wiring instructions, as well as how to
install the optional cards and units.
Section 3, Features.
Describes all the basic, optional and programmable features in alphabetical order. It
also provides information about the programming required, conditions, connection
references, related features and operation for every feature.
Section 4, System Programming.
Provides step-by-step programming instructions for a proprietary telephone.
Section 5, List.
Lists tone/ring tone and default values of system programming.
Section 6, Troubleshooting.
Provides information for system and telephone troubleshooting.
NOTE
The following documents may be used in conjunction with this manual:
• User Manual for KX-TD816/KX-TD1232 System, DIGITAL Proprietary Telephones,
DSS Console and Single Line Telephones.
• Programming Table
The programming table is designed to be used as a hard copy reference to the user-
programmed data.

*: Available for KX-TD1232 only. 7
Contents
Section 1, System Outline
1.1 System Highlights............................................................................. 1-2
1.2 Basic System Construction .............................................................. 1-4
1.3 Digital Proprietary Telephones........................................................ 1-5
1.4 Options............................................................................................... 1-6
1.5 Specifications..................................................................................... 1-9
1.5.1 General Description................................................................. 1-9
1.5.2 Characteristics......................................................................... 1-10
1.5.3 System Capacity...................................................................... 1-11
Section 2, Installation
2.1 Before Installation ............................................................................ 2-2
2.2 Installation of the Main Unit ........................................................... 2-4
2.2.1 Unpacking ............................................................................... 2-4
2.2.2 Name and Location ................................................................. 2-4
* 2.2.3 About the Remote Card (KX-TD196)..................................... 2-6
2.2.4 Wall Mounting......................................................................... 2-7
2.2.5 Frame Earth Connection.......................................................... 2-9
2.2.6 Opening Front Cover............................................................... 2-9
2.3 Connection......................................................................................... 2-10
2.3.1 System Connection Diagram................................................... 2-10
2.3.2 CO Line Connection (KX-TD816 : CO 1 through CO 4)....... 2-13
2.3.3 Extension Connection
for Digital Proprietary Telephones, Single Line Telephones and DSS Console .... 2-14
2.3.4 Paralleled Telephone Connection
for a Digital Proprietary Telephone and a Single Line Telephone ....................... 2-19
2.3.5 EXtra Device Port (XDP) Connection
for a Digital Proprietary Telephone and a Single Line Telephone ....................... 2-21
2.3.6 External Pager Connection...................................................... 2-22
2.3.7 External Music Source Connection......................................... 2-24
2.3.8 Printer Connection................................................................... 2-26
2.4 Optional Cards and Units Installation ........................................... 2-29
2.4.1 Location of Optional Cards and Units..................................... 2-30
2.4.2 CO Line Connection (KX-TD1232 : CO 1 through CO 8)..... 2-32
2.4.3 Lightning Protector Installation .............................................. 2-35
2.4.4 8-Station Line Unit Connection .............................................. 2-38
2.4.5 4-CO Line Unit Connection.................................................... 2-38
2.4.6 4-DID Line Unit Connection................................................... 2-38
2.4.7 2-ISDN S0 Line Unit Connection........................................... 2-38
2.4.8 Installing Expansion Unit
(KX-TD170 / KX-TD180(D) / KX-TD185 / KX-TD280)...... 2-39
2.4.9 Doorphone and Door Opener Connection............................... 2-43

8 *1: Available for KX-TD1232 only.
*2: Available for KX-TD816 only.
Contents
*12.4.10 System Connection.................................................................. 2-49
*22.4.11 Backup Battery and Adaptor Card Connection....................... 2-51
2.4.12 Battery Adapter Connection.................................................... 2-52
2.5 Power Failure Transfer Connection................................................ 2-54
2.6 Starting the System for the First Time........................................... 2-56
2.7 System Restart .................................................................................. 2-58
2.8 System Data Clear............................................................................ 2-59
Section 3, Features
AAbsent Message Capability ................................................................ 3-2
Account Code Entry............................................................................ 3-2
Alternate Calling – Ring / Voice......................................................... 3-4
Answering, Direct CO Line................................................................ 3-4
Automatic Callback Busy (Camp-On)................................................ 3-5
Automatic Redial →Redial, Automatic............................................. 3-98
Automatic Route Selection (ARS)...................................................... 3-6
Automatic Station Release.................................................................. 3-12
BBackground Music (BGM)................................................................. 3-12
Background Music (BGM) – External................................................ 3-13
Budget Management........................................................................... 3-13
Busy Lamp Field................................................................................. 3-14
Busy Station Signaling (BSS)............................................................. 3-14
Button, Direct Station Selection (DSS) .............................................. 3-15
Button, Flexible .................................................................................. 3-16
Button, Group-CO (G-CO)................................................................. 3-17
Button, Loop-CO (L-CO) ................................................................... 3-18
Button, Single-CO (S-CO).................................................................. 3-19
Buttons on Digital Proprietary Telephones......................................... 3-20
CCALL FORWARDING FEATURES – SUMMARY ......................... 3-22
Call Forwarding – All Calls................................................................ 3-22
Call Forwarding – Busy...................................................................... 3-23
Call Forwarding – Busy / No Answer................................................ 3-24
Call Forwarding – Follow Me............................................................ 3-24
Call Forwarding – No Answer............................................................ 3-25
Call Forwarding – to CO Line............................................................ 3-26
Call Hold – CO Line........................................................................... 3-27
Call Hold – Intercom.......................................................................... 3-28
Call Hold, Exclusive – CO Line......................................................... 3-28
Call Hold, Exclusive – Intercom ........................................................ 3-29
Call Hold Retrieve – CO Line............................................................ 3-29
Call Hold Retrieve – Intercom............................................................ 3-30

9
Contents
Calling Line Identification Restriction (CLIR).................................. 3-30
Call Park............................................................................................. 3-31
Calling Party Control (CPC) Signal Detection................................... 3-31
Call Pickup, CO Line ......................................................................... 3-32
Call Pickup, Directed.......................................................................... 3-33
Call Pickup, Group............................................................................. 3-33
Call Pickup Deny................................................................................ 3-34
Call Splitting....................................................................................... 3-34
CALL TRANSFER FEATURES – SUMMARY............................... 3-35
Call Transfer, Screened – to CO Line................................................. 3-35
Call Transfer, Screened – to Extension .............................................. 3-36
Call Transfer, Unscreened – to Extension.......................................... 3-36
Call Waiting........................................................................................ 3-37
Charge Fee Reference......................................................................... 3-38
Class of Service (COS)....................................................................... 3-39
CO Incoming Call Information Display............................................. 3-40
CO Incoming Call Information Log................................................... 3-41
CO Line Connection Assignment....................................................... 3-42
CO Line Connection Assignment – Outgoing.................................... 3-42
CO Line Group................................................................................... 3-43
Conference.......................................................................................... 3-44
Conference, Unattended ..................................................................... 3-44
Confirmation Tone.............................................................................. 3-45
Consultation Hold............................................................................... 3-46
DData Line Security .............................................................................. 3-47
Delayed Ringing →Ringing, Delayed............................................... 3-100
Dial Tone, Distinctive......................................................................... 3-48
Dial Type Selection ............................................................................ 3-49
Direct Dialing In (DDI)...................................................................... 3-50
Direct In Lines (DIL).......................................................................... 3-51
Direct Inward Dialing (DID).............................................................. 3-52
Direct Station Selection (DSS) Button →Button, Direct Station
Selection (DSS)....................................................................... 3-15
Directed Call Pickup →Call Pickup, Directed.................................. 3-33
Display, Call Information................................................................... 3-53
Display, Extension Programmed Data................................................ 3-54
Display, Self-Extension Number........................................................ 3-55
Display, Time and Date ...................................................................... 3-56
Display Contrast Adjustment ............................................................. 3-56
Do Not Disturb (DND)....................................................................... 3-56
Do Not Disturb (DND) Override........................................................ 3-57
Door Opener....................................................................................... 3-58

10
Contents
Doorphone Call .................................................................................. 3-58
DSS Console (KX-T7240) ................................................................. 3-59
EElectronic Station Lockout................................................................. 3-61
End-to-End DTMF Signaling (Tone Through)................................... 3-62
Exclusive Hold →Call Hold, Exclusive – CO Line / Intercom......... 3-28 / 29
Extension Group................................................................................. 3-62
External Feature Access ..................................................................... 3-63
EXtra Device Port (XDP)................................................................... 3-64
FFlexible Button →Button, Flexible................................................... 3-16
Flexible Numbering............................................................................ 3-64
Floating Station .................................................................................. 3-67
Full One-Touch Dialing...................................................................... 3-67
GGroup Call Pickup →Call Pickup, Group......................................... 3-33
Group CO (G-CO) Button →Button, Group-CO (G-CO)................. 3-17
HHandset / Headset Selection............................................................... 3-68
Handsfree Answerback....................................................................... 3-69
Handsfree Operation........................................................................... 3-69
Hold Recall......................................................................................... 3-70
Host PBX Access ............................................................................... 3-70
HOTEL APPLICATION .................................................................... 3-71
Check-In / Check-Out......................................................................................... 3-71
Timed Reminder, Remote (Wake-Up Call) ........................................................ 3-72
IIntercept Routing................................................................................ 3-73
Intercom Calling................................................................................. 3-73
LLast Number Redial →Redial, Last Number .................................... 3-98
LED Indication, CO Line ................................................................... 3-74
LED Indication, Intercom................................................................... 3-75
Limited Call Duration......................................................................... 3-76
Line Access, Automatic...................................................................... 3-77
Line Access, CO Line Group ............................................................. 3-78
Line Access, Direct............................................................................. 3-79
Line Access, Individual...................................................................... 3-79
Line Preference – Incoming (No Line / Prime Line / Ringing Line) ... 3-80
Line Preference – Outgoing (Idle Line / No Line / Prime Line)........ 3-81
Lockout............................................................................................... 3-82
Loop-CO (L-CO) Button →Button, Loop-CO (L-CO)..................... 3-18
MManager Extension............................................................................. 3-82
Message Waiting................................................................................. 3-83
Microphone Mute............................................................................... 3-84
Mixed Station Capacities.................................................................... 3-84
Module Expansion.............................................................................. 3-85
Music on Hold.................................................................................... 3-86

11
Contents
NNight Service...................................................................................... 3-86
OOff-Hook Call Announcement (OHCA) ............................................ 3-87
One-Touch Dialing............................................................................. 3-88
One-Touch Transfer by DSS Button................................................... 3-89
Operator.............................................................................................. 3-89
Operator Call ...................................................................................... 3-90
PPAGING FEATURES – SUMMARY ................................................ 3-91
Paging – All........................................................................................ 3-91
Paging – External ............................................................................... 3-92
Paging – Group................................................................................... 3-93
Paralleled Telephone........................................................................... 3-93
Pause Insertion, Automatic................................................................. 3-94
Pickup Dialing.................................................................................... 3-95
Power Failure Restart ......................................................................... 3-95
Power Failure Transfer....................................................................... 3-96
Pulse to Tone Conversion................................................................... 3-96
RRecall.................................................................................................. 3-97
Redial, Automatic .............................................................................. 3-98
Redial, Last Number .......................................................................... 3-98
Redial, Saved Number ....................................................................... 3-99
Remote Station Lock Control............................................................. 3-100
Reverse Circuit................................................................................... 3-100
Ringing, Delayed................................................................................ 3-100
Ringing, Discriminating ..................................................................... 3-101
Ringing Tone Selection for CO Buttons............................................. 3-102
SSaved Number Redial →Redial, Saved Number............................... 3-99
Screened Call Transfer – to CO Line
→Call Transfer, Screened – to CO Line.................................. 3-35
Screened Call Transfer – to Extension
→Call Transfer, Screened – to Extension................................ 3-36
Secret Dialing..................................................................................... 3-102
Single-CO (S-CO) Button →Button, Single-CO (S-CO) ................. 3-19
Special Display Features for KX-T7235............................................ 3-103
CO Outgoing Call Log ....................................................................................... 3-103
Extension Dialing............................................................................................... 3-103
Station Speed Dialing......................................................................................... 3-104
System Feature Access Menu............................................................................. 3-104
System Speed Dialing......................................................................................... 3-105
Station Feature Clear.......................................................................... 3-106
Station Hunting................................................................................... 3-106
Station Message Detail Recording (SMDR) ...................................... 3-107
Station Programming.......................................................................... 3-109

12 *: Available for KX-TD1232 only.
Contents
Station Programming Data Default Set.............................................. 3-110
Station Speed Dialing......................................................................... 3-111
* System Connection............................................................................. 3-111
System Data Default Set..................................................................... 3-112
System Programming and Diagnosis with Personal Computer.......... 3-113
System Programming with Digital Proprietary Telephone................. 3-114
System Speed Dialing......................................................................... 3-115
System Working Report...................................................................... 3-116
TTime-Out, Variable ............................................................................. 3-117
Timed Reminder................................................................................. 3-118
Toll Restriction................................................................................... 3-119
Toll Restriction Override by Account Code Entry............................. 3-123
Toll Restriction Override for System Speed Dialing.......................... 3-124
Trunk (CO Line) Answer From Any Station (TAFAS)...................... 3-125
UUnattended Conference →Conference, Unattended.......................... 3-44
Unscreened Call Transfer – to Extension
→Call Transfer, Unscreened – to Extension.......................... 3-36
VVoice Mail Integration ........................................................................ 3-126
Volume Control – Speaker / Handset Receiver / Headset / Ringer.... 3-131
Section 4, System Programming
4.1 General Programming Instructions................................................ 4-2
4.1.1 Using the Digital Proprietary Telephone................................. 4-3
4.1.2 Programming Ways................................................................. 4-7
4.1.3 Entering Characters................................................................. 4-9
4.1.4 User Programming Mode........................................................ 4-12
4.1.5 Example of Programming ....................................................... 4-13
4.2 Manager Programming.................................................................... 4-15
[000] Date and Time Set................................................................... 4-15
[001] System Speed Dialing Number Set......................................... 4-17
[002] System Speed Dialing Name Set............................................. 4-19
[003] Extension Number Set............................................................. 4-20
[004] Extension Name Set................................................................ 4-22
[005] Flexible CO Button Assignment............................................. 4-24
[006] Operator / Manager Extension Assignment............................ 4-26
[007] DSS Console Port and Paired Telephone Assignment............ 4-27
[008] Absent Messages..................................................................... 4-29
[009] Budget Management ............................................................... 4-31
[010] Charge Margin Rate ................................................................ 4-32
4.3 System Programming....................................................................... 4-33
[100] Flexible Numbering................................................................. 4-33
[101] Day / Night Service Switching Mode ..................................... 4-36

13
Contents
[102] Day / Night Service Starting Time.......................................... 4-37
[103] Automatic Access CO Line Group Assignment ..................... 4-39
[106] Station Hunting Type .............................................................. 4-40
[107] System Password..................................................................... 4-41
[108] One-Touch Transfer by DSS Button ....................................... 4-42
[109] Expansion Card / Unit Type.................................................... 4-43
[113] VM Status DTMF Set ............................................................. 4-45
[114] VM Command DTMF Set....................................................... 4-47
[115] Adjust Time............................................................................. 4-49
[116] ROM Version Display............................................................. 4-50
[117] Charge Display Selection........................................................ 4-51
[118] Charge Verification Assignment ............................................. 4-52
[119] Charge Verification ID Code Set............................................. 4-53
[120] User Password......................................................................... 4-54
[121] Hotel Application.................................................................... 4-55
4.4 Timer Programming......................................................................... 4-56
[200] Hold Recall Time .................................................................... 4-56
[201] Transfer Recall Time............................................................... 4-57
[202] Call Forwarding – No Answer Time....................................... 4-58
[203] Intercept Time ......................................................................... 4-59
[204] Pickup Dial Waiting Time....................................................... 4-60
[205] Extension-to-CO Line Call Duration Time............................. 4-61
[206] CO-to-CO Call Duration Time................................................ 4-62
[207] First Digit Time....................................................................... 4-63
[208] Inter Digit Time....................................................................... 4-64
[209] Automatic Redial Repeat Times.............................................. 4-65
[210] Automatic Redial Interval Time.............................................. 4-66
[211] Dial Start Time........................................................................ 4-67
[212] Call Duration Count Start Time .............................................. 4-68
[213] Message Waiting Ring Interval Time...................................... 4-69
4.5 TRS / ARS Programming ............................................................... 4-70
[300] TRS Override for System Speed Dialing................................ 4-70
[301]–[305] TRS Denied Code Entry for Levels 2 through 6........... 4-71
[306]–[310] TRS Excepted Code Entry for Levels 2 through 6........ 4-72
[311] Emergency Dial Set................................................................. 4-73
[312] ARS Mode............................................................................... 4-74
[313] ARS Time................................................................................ 4-75
[314]–[321] ARS Leading Digit Entry for Plans 1 through 8........... 4-76
[322]–[329] ARS Routing Plans 1 through 8.................................... 4-77
[330] ARS Modify Removed Digit................................................... 4-79
[331] ARS Modify Added Number .................................................. 4-80

14
Contents
4.6 CO Line Programming .................................................................... 4-81
[400] CO Line Connection Assignment ........................................... 4-81
[401] CO Line Group Assignment.................................................... 4-82
[402] Dial Mode Selection................................................................ 4-83
[403] Pulse Speed Selection.............................................................. 4-84
[404] DTMF Time ............................................................................ 4-85
[405] CPC Signal Detection Incoming Set....................................... 4-86
[407]–[408] DIL 1:1 Extension — Day / Night................................ 4-88
[409]–[410] Intercept Extension — Day / Night............................... 4-89
[411] Host PBX Access Codes......................................................... 4-90
[412] Pause Time.............................................................................. 4-92
[413] Register Recall Signal Time.................................................... 4-93
[414] Disconnect Time...................................................................... 4-94
[415] CPC Signal Detection Outgoing Set ....................................... 4-95
[416] ISDN Line Number Assignment............................................. 4-97
[417] ISDN Outgoing CLIR Service Assignment............................ 4-98
[418] ISDN DDI Service Assignment .............................................. 4-99
[419] CO Line Name Assignment .................................................... 4-100
[420] Reverse Circuit Assignment.................................................... 4-101
[430] DID Table Number Assignment.............................................. 4-102
[431] DID Incoming Assignment ..................................................... 4-103
[432] DID Outgoing Assignment...................................................... 4-104
[433] DID Subscriber Number Removed Digit and
Received Digit......................................................................... 4-105
[434] DID Added Number................................................................ 4-106
[435] DID Wink Time Assignment................................................... 4-107
* [436] Pay Tone Assignment.............................................................. 4-107-i
4.7 COS Programming........................................................................... 4-108
[500]–[501] Toll Restriction Level — Day / Night........................... 4-108
[502] Extension-to-CO Line Call Duration Limit ............................ 4-109
[503] Call Transfer to CO Line......................................................... 4-110
[504] Call Forwarding to CO Line.................................................... 4-111
[507] Do Not Disturb Override......................................................... 4-112
[508] Account Code Entry Mode...................................................... 4-113
4.8 Extension Programming .................................................................. 4-114
[600] EXtra Device Port ................................................................... 4-114
[601] Class of Service....................................................................... 4-115
[602] Extension Group Assignment.................................................. 4-117
[603]–[604] DIL 1:N Extension and Delayed Ringing
— Day / Night......................................................................... 4-118
[605]–[606] Outgoing Permitted CO Line Assignment
— Day / Night......................................................................... 4-120
*: Available for KX-TD1232 only.

*: Available for KX-TD1232 only. 15
Contents
[607]–[608] Doorphone Ringing Assignment — Day / Night.......... 4-122
[609] Voice Mail Access Codes........................................................ 4-124
[610] ISDN DDI Number / Extension Number Transformation ...... 4-125
4.9 Resource Programming.................................................................... 4-126
[800] SMDR Incoming / Outgoing Call Log Printout...................... 4-126
[801] SMDR Format......................................................................... 4-127
[802] System Data Printout............................................................... 4-128
[803] Music Source Use.................................................................... 4-129
[804] External Pager BGM............................................................... 4-130
[805] External Pager Confirmation Tone.......................................... 4-131
[806]–[807] EIA (RS-232C) Parameters — Port 1 / Port 2 .............. 4-132
[813] Floating Number Assignment ................................................. 4-134
* [814] Modem Standard..................................................................... 4-135
[815] System Working Report Printout ............................................ 4-136
[816] System Working Report Clear................................................. 4-137
4.10 Option Programming....................................................................... 4-138
[990] System Additional Information............................................... 4-138
[991] COS Additional Information................................................... 4-143
Section 5, List
5.1 Tone / Ring Tone ............................................................................... 5-2
5.2 Default Values ................................................................................... 5-4
Section 6, Troubleshooting
6.1 Troubleshooting ................................................................................ 6-2
6.1.1 Installation............................................................................... 6-2
6.1.2 Connection .............................................................................. 6-3
6.1.3 Operation................................................................................. 6-4
6.1.4 Using Reset Button.................................................................. 6-5

Section 1
System Outline
This section provides general information on the system,
including system capacity and specifications.

1-2 System Outline *: Available for KX-TD1232 only.
1.1 System Highlights
System Capacity Basic Module System
System Expansion Connection
KX-TD816
CO line (ISDN S0 line) 4 8 (2) —
Extension 8 16 —
KX-TD1232
CO line (ISDN S0 line) 0 12 (6) 24 (12)
Extension 16 32 64
Module Expansion Expansion modules are used to increase the system capacity. CO
line modules and extension modules can be added to the basic
system to add CO lines and extensions.
EXtra Device Port (XDP)
Each extension jack in the system supports the connection of a
digital proprietary telephone and a single line device. The devices
have different extension numbers and are treated as two completely
different extensions.
Paralleled Telephone Connection
Every jack in the system also supports the parallel connection of a
digital proprietary telephone and a single line device. They share
the same extension number and are considered by the system to be
one extension.
Super Hybrid System This system supports the connection of digital proprietary
telephones, DSS Console and single line devices such as single line
telephones, facsimiles, and data terminals.
System Connection* With the addition of optional System Inter Connection Card, two
Digital Super Hybrid Systems can be connected together to expand
the system capacity. The two systems function as one, however,
some functions such as paging and music on hold are duplicated.
Digital Proprietary Telephones (DPT)
The system supports four different models of digital proprietary
telephones which cover the range from a monitor set to a large
display handsfree version.

System Outline 1-3
1.1 System Highlights
Programming System The system can be programmed from a digital proprietary
telephone or from a personal computer.
Voice Mail Integration The system supports Voice Processing Systems with in-band
DTMF signaling.
Automatic Route Selection (ARS)
Automatically selects the pre-programmed least expensive route for
outgoing toll calls.
Trunk (CO Line) Answer From Any Station (TAFAS)
Ringing occurs over the external paging system; call can be
answered from any station.
Remote Station Lock Control
Allows an operator to lock an extension so that outgoing calls
cannot be made.
Charge Fee Reference Allows the user to see charges and print out the charges.
Budget Management Limits the telephone usage to a pre-assigned amount.
Hotel Application Allows to handle the front and operator service such as check-in /
check-out and wake-up call setting.

1-4 System Outline
1.2 Basic System Construction
The KX-TD816 Digital Super Hybrid System has a basic capacity
of 4 CO lines and 8 extensions, and KX-TD1232 has 16 extensions.
It is capable of supporting Panasonic digital proprietary telephones,
DSS Consoles and single line devices such as single line
telephones, facsimiles.
To expand its capabilities the system can be equipped with optional
components or customer-supplied peripherals such as external
speakers and external music sources (e.g., radios).
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic
Panasonic
D816
DIGITAL SUPER HYBRID SYSTEM

System Outline 1-5
1.3 Digital Proprietary Telephones
The following Panasonic digital proprietary telephones are
available with this system.
Proprietary Description
Telephone
KX-T7220 Speakerphone, 24 CO
KX-T7230 Display, speakerphone, 24 CO
KX-T7235 Large display, speakerphone, 12 CO
KX-T7250 Monitor, 6 CO
Note CO: CO line access button