Panasonic JS-925WS User manual

One Blue Hill Plaza, 16th Floor, PO Box 1546
Pearl River, NY 10965
1-800-PC-AMERICA, 1-800-722-6374
(Voice) 845-920-0800 (Fax) 845-920-0880
1 | P a g e
Panasonic JS-925WS Installation Guide
This document provides step-by-step instructions for setting up your Panasonic JS-925WS system, which
contains the following components: The JS-925WS Terminal, the integrated Pole Display, the integrated
MSR.

2 | P a g e
Hardware Ports
AC Inlet:
120V AC Power
COM3:
Serial Port (non-powered)
COM1:
(Powered) Serial Port
COM4:
Serial Port (non-powered)
COM2:
(Powered) Serial Port
C/D2:
This is a port which is for an optional device
from Panasonic (JS-925CD install type).
C/D1:
Cash Drawer Connection
LINE OUT:
Speaker Audio Connection
LAN:
Internet will Connect Here
USB Ports (x2):
These Ports can be used to connect any
USB Peripheral.
USB Ports (x2):
These Ports can be used to connect any
USB Peripheral.
Speaker:
Chassis Speaker
VGA:
Open

3 | P a g e
Installing Microsoft POS for .NET
The installer for Microsoft POS for .NET can be downloaded at:
http://download2.pcamerica.com/drivers/POS_for_.Net.exe
Double-click the installer and follow these steps:
Select Yes.
Select Browse and select a folder to unzip all files
to.
Select Unzip.
Navigate to the folder containing the unzipped
files.
Double-click on Setup.exe.
Select Install.

4 | P a g e
Provide a user name and organization.
Select Next.
Select Accept.
Select Next.

5 | P a g e
Select Install.
Select Finish.

6 | P a g e
Installing the OPOS Manager and configuring the OPOS devices
The installer for the OPOS Control Manager can be downloaded at:
http://download2.pcamerica.com/drivers/Manufacturer/Panasonic/JS-925WS_OPOS.zip
Double-click the extracted installer (setup.exe) and follow these steps:
1. Select Next.
2. Select Next to the installation destination
location.

7 | P a g e
3. Select Next.
4. Optionally choose to Create a desktop icon.
5. Select Next.
6. Select Install.

8 | P a g e
7. When setup is complete, select Yes, restart the
computer now.
8. Select Finish.

9 | P a g e
Configuring CRE or RPE to communicate with all devices
To configure CRE or RPE to communicate with all devices, open CRE or RPE, select Manager, provide the
requested credentials, and follow these steps.
1. Select Setup then select Setup Screen.
2. Select the Hardware tab, under Page 1:
3. Under Pole Display Type select OPOS.
4. Under OPOS Pole Display use the dropdown to select JS-925WS_VFD2L.

10 | P a g e
5. At the Hardware tab, select Page 3.
6. Under OPOS MSR (Card swipe), select MSR250.
7. Select Update.