Panasonic HMs700 Series User manual

ACGM0198V3EN Version 3.0
2023.01 https://industry.panasonic.eu
Touch Terminals
HMs700 Series
Instruction Manual

2ACGM0198V3EN Version 3.0
Subject to change without notice.
The information contained in this manual is provided for informational purposes only. While e󰀨orts were made
to verify the accuracy of the information contained in this manual, it is provided “as is” without warranty of any
kind.
Third-party brands and names are the property of their respective owners.
This manual and everything described in it are copyrighted. You may not copy this manual, in whole or part,
without written consent of Panasonic.
Please direct support matters and technical questions to your local Panasonic representative.
Distributed by Panasonic Industry Europe GmbH
https://industry.panasonic.eu

3ACGM0198V3EN Version 3.0
Table of contents
1. Introduction ............................................................................................................................................... 4
2. Important symbols .................................................................................................................................... 4
3. Special instructions for use ..................................................................................................................... 5
4. Standards and approvals ......................................................................................................................... 6
4.1 HMs705.............................................................................................................................................6
4.2 HMs707, HMs710, HMs715, HMs721............................................................................................... 6
5. Product overview ...................................................................................................................................... 7
6. Productidentication ............................................................................................................................... 7
7. Technical data common to all models..................................................................................................... 8
7.1 Hardware specications .................................................................................................................... 8
7.2 Environmental conditions .................................................................................................................. 8
7.3 Electromagnetic compatibility (EMC) ................................................................................................ 9
7.4 Durability information ........................................................................................................................ 9
7.5 Viewing angles ................................................................................................................................10
7.6 Touchscreen properties................................................................................................................... 10
8. Technical data by model......................................................................................................................... 11
8.1 HMs705, HMs707, HMs710 ............................................................................................................ 11
8.2 HMs715, HMs721 ........................................................................................................................... 12
9. Product dimensions................................................................................................................................ 13
10. Unpacking and packing instructions .................................................................................................... 17
11. Installation ............................................................................................................................................... 18
11.1 Installation environment .................................................................................................................. 18
11.2 Installation procedure...................................................................................................................... 18
12. Connections............................................................................................................................................. 19
12.1 Ethernet port ................................................................................................................................... 19
12.2 Power supply, grounding, and shielding.......................................................................................... 19
13. Battery ...................................................................................................................................................... 20
14. Getting started......................................................................................................................................... 22
15. Disposal ................................................................................................................................................... 22
16. Record of changes .................................................................................................................................. 23

Introduction
4ACGM0198V3EN Version 3.0
1. Introduction
This instruction manual contains information about the installation, transportation, storage, assembly,
use and maintenance of touch terminals of the HMs700 series.
The following models are available:
HMs705 Touch terminal with 5” TFT color widescreen, multi-touch capacitive touchscreen,
Ethernet port PoE
HMs707 Touch terminal with 7” TFT color widescreen, multi-touch capacitive touchscreen,
Ethernet port PoE
HMs710 Touch terminal with 10.1” TFT color widescreen, multi-touch capacitive touchscreen,
Ethernet port PoE
HMs715 Touch terminal with 15.6” TFT color widescreen, multi-touch capacitive touchscreen,
Ethernet port PoE
HMs721 Touch terminal with 21.5” TFT color widescreen, multi-touch capacitive touchscreen,
Ethernet port PoE
2. Important symbols
One or more of the following symbols may be used in this documentation to indicate the type of
hazard.
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in serious or moderate injury.
Notice
Indicates a property damage message.

Special instructions for use
5ACGM0198V3EN Version 3.0
3. Special instructions for use
• The product shall only be used in an area of not more than pollution degree 2, as dened in
IEC/EN 60664-1.
• The product shall be installed in an enclosure that provides a degree of protection not less than
IP54 in accordance with IEC/EN 60079-15.
• Transient protection shall be provided that is set at a level not exceeding 140% of the peak rated
voltage value at the supply terminals to the product.
• Install the product according to the accompanying installation instructions.
• Ground the product according to the accompanying installation instructions.
• Only qualied personnel may install or repair the product.
• Care shall be taken to avoid that layers of dust form on the touch terminals in a way that might
cause the accumulation of static charges.
• Keep the faceplate of the product clean. The product must be cleaned only with a soft cloth and
neutral soap product. Do not use solvents.
• This product should not be used for purposes and methods other than indicated in this document
and in the documentation accompanying the product.

Standards and approvals
6ACGM0198V3EN Version 3.0
4. Standards and approvals
The products are in compliance with the Restrictions on Certain Hazardous Substances (RoHS)
Directive 2011/65/EU.
In compliance with the relevant regulations the products are CE marked.
4.1 HMs705
The product has been designed for use in an industrial environment in compliance with the
2014/30/EU EMC Directive.
The product complies with the following standards:
EN 61000-6-4 EN 61000-4-2 CISPR 22 Class B
EN 61000-6-3 EN 61000-4-3 CISPR 16-2-3
EN 61000-6-2 EN 61000-4-4
EN 61000-6-1 EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
4.2 HMs707, HMs710, HMs715, HMs721
The products have been designed for use in an industrial environment in compliance with the
2014/53/EU EMC Directive.
The products comply with the following standards:
EN 61000-6-4 ETSI EN 301 489-1 EN 62311
EN 61000-6-3 ETSI EN 301 489-17 EN 61010-1
EN 61000-6-2 ETSI EN 300 328 EN 61010-2-201
EN 61000-6-1
Standard radio signal: Wi-Fi 2.4GHz (calculated according to EN 62311)
Minimum distance form the body: 2cm (calculated according to EN 62311)
The Wi-Fi antenna is positioned behind the black band above the display.

Product overview
7ACGM0198V3EN Version 3.0
5. Product overview
The HMs700 series touch terminals are ideal for eld installation in critical areas. They are equipped
with a high resolution display and a multi-touch capacitive touchscreen with a robust glass front.
Power over Ethernet (PoE) technology is available for maximum connectivity through standard CAT5
wiring. The HMs700 series can be installed under di󰀩cult environmental conditions (IP67 protection)
and can be mounted to all standardized support arm systems. The product features environment and
motion sensors and has been designed as IIoT edge device for Industry 4.0 applications.
The HMs700 series touch terminals have been optimized to run the software HMWIN Studio for
powerful HMI applications.
• Open platform for Linux applications
• OPC UA server / client gateway
• Integrated sensors (temperature and acceleration)
• Powerful browser with industry standard web engines
• Wi-Fi (HMs707, HMs710, HMs715, HMs721)
6. Productidentication
The product may be identied through a plate attached to the rear cover. You will have to know the
product type you are using for correct usage of the information contained in the manual.
The following information is provided by the plate:
• Product model name
• Year/week of production
• Serial number

Technical data common to all models
8ACGM0198V3EN Version 3.0
7. Technical data common to all models
7.1 Hardwarespecications
Touchscreen technology Projected capacitive, multi-touch
Real-time clock back-up battery 3V, 7mAh lithium, rechargeable, not user-replaceable,
model VL1220
Flash memory
4GB (HMs705, HMs707, HMs710)
8GB (HMs715, HMs721)
RAM
1GB (HMs705, HMs707, HMs710)
2GB (HMs715, HMs721)
Real-time clock Clock/calendar with back-up battery
Accuracy real-time clock (at 25°C) <100ppm
7.2 Environmental conditions
Operating temperature
(surrounding air temperature) -20 to +55°C (vertical installation) EN 60068-2-14
Storage temperature
-30 to +80°C
(HMs705, HMs707, HMs710)
-20 to +70°C
(HMs715, HMs721)
EN 60068-2-1
EN 60068-2-2
EN 60068-2-14
Operating and storage humidity 5–85% RH non-condensing EN 60068-2-30
Vibrations
5–9Hz, 7mm p-p
9–150Hz, 1g
EN 60068-2-6
Shock ±50g, 11ms, 3 pulses per axis EN 60068-2-27
Degree of protection IP67 (requires appropriate accessories
and cables) EN 60529

Technical data common to all models
9ACGM0198V3EN Version 3.0
7.3 Electromagnetic compatibility (EMC)
Radiated disturbance test
Class A
(HMs707, HMs710, HMs715, HMs721)
Class B (HMs705)
CISPR 22
CISPR 16-2-3
Electrostatic discharge immunity
test
8kV (air electrostatic discharge)
4kV (contact electrostatic discharge)
EN 61000-4-2
Radiated, radio frequency,
electromagneticeldimmunitytest
80MHz–1GHz, 10V/m
1.4–2GHz, 3V/m
2–2.7GHz, 1V/m
EN 61000-4-3
Burst immunity test
±2kV DC power port
±1kV signal line
EN 61000-4-4
Surge immunity test
±0.5kV DC power port (line to earth)
±0.5kV DC power port (line to line)
±1kV signal line (line to earth)
EN 61000-4-5
Immunity to conducted disturbances
inductedbyradiofrequencyeld 0.15–80MHz, 10V EN 61000-4-6
Powerfrequencymagneticeld
immunity test Enclosure, 50/60Hz, 30A/m EN 61000-4-8
7.4 Durability information
Backlight service life (LED type)
40000 hours or more (Time of continuous operation until
the brightness of the backlight reaches 50% of the rated
value when the surrounding air temperature is 25°C)
* see note
Surface resistance
The HMs700 series front glass is resistant (no visible
changes) to the following chemicals and liquids after an
application time of 24 hours:
Betadine (10% povidone solution), Co󰀨ee, Cola, Dextrose
(5% glucose solution), Electrode gel/paste, Ethyl alcohol
(70–90%), Hydrogen chloride (0.5% solution pH=1),
Hydrogen peroxide (3% solution), Isopropyl alcohol,
NaCl (0.9% solution), Quaternary ammonium compound,
Sodium hypochlorite
* Extended use in environments where the surrounding air temperature is 40°C or higher may degrade backlight
quality, reliability or durability.

Technical data common to all models
10 ACGM0198V3EN Version 3.0
7.5 Viewing angles
The viewing angles for the horizontal (L, R) and vertical (U, D) axes are specied in reference to the
vertical axis of the display. The viewing angles always refer to the standard mounting orientation.
For the viewing angle values (U, D ,L, R), refer to the technical data of the respective touch terminal
model.
U: From top
D: From bottom
L: From left
R: From right
HMs705 HMs707 HMs710 HMs715 HMs721
Horizontal viewing
angle L/R: typ. 70° L/R: typ. 75° L/R: typ. 85° L/R: typ. 80° L/R: typ. 89°
Vertical viewing angle
U: typ. 50°
D: typ. 70°
U/D: typ. 75° U/D: typ. 85° U/D: typ. 80° U/D: typ. 89°
7.6 Touchscreen properties
• Multi-touch operation: up to 5 ngers simultaneously
• Glove operation: supported
Projected capacitive touchscreens (PCAP) are suitable for operation with or without gloves. A large
number of gloves (rubber gloves, light/heavy leather gloves, disposable latex gloves, etc.) are
supported. However, due to the variety of commercially available gloves, we cannot guarantee the
operation with all glove types.
• Passive stylus pens: supported
• Active stylus pens: not supported
• Hardened front glass: yes

Technical data by model
11ACGM0198V3EN Version 3.0
8. Technical data by model
8.1 HMs705, HMs707, HMs710
HMs705 HMs707 HMs710
Display / Backlight TFT color / LED
Colors 64K
Resolution (pixel) 800 x 480 1024 x 600 1280 x 800
Brightness 300cd/m² typ. 400cd/m² typ.
Display size (inch) 5” widescreen 7” widescreen 10.1” widescreen
Dimming yes (to 0%)
Flash memory 4GB
RAM 1GB
Operating system Linux RT
CPU ARM Cortex-A9, dual core, 800MHz
Ethernet port 1x 10/100Mbit PoE
USB port 1 host interface version 2.0, max. 500mA (available with special cable)
Sensors temperature, 3-axis accelerometer
Real-time clock yes
Wi-Fi not available IEEE 802.11a/b/g
Power supply 802.3af
Current
consumption 6W 12W 14W
Weight 0.5kg 0.7kg 1.2kg

Technical data by model
12 ACGM0198V3EN Version 3.0
8.2 HMs715, HMs721
HMs715 HMs721
Display / Backlight TFT color / LED
Colors 64K
Resolution (pixel) 1366 x 768 1920 x 1080
Brightness 400cd/m² typ.
Display size (inch) 15.6” widescreen 21.5” widescreen
Dimming yes (to 0%)
Flash memory 8GB
RAM 2GB
Operating system Linux RT
CPU ARM Cortex-A9, quad core, 800MHz
Ethernet port 1x 10/100Mbit PoE
USB port 1 host interface version 2.0, max. 500mA
(available with special cable)
Sensors temperature, 3-axis accelerometer
Real-time clock yes
Wi-Fi IEEE 802.11a/b/g
Power supply 802.3at 802.3bt
Current
consumption 23W 35W
Weight 4.0kg 6.0kg

Product dimensions
13ACGM0198V3EN Version 3.0
9. Product dimensions
HMs705
A B C D
105.1mm 148.3mm 16.5mm 17mm
Rear view

Product dimensions
14 ACGM0198V3EN Version 3.0
HMs707
A B C D
131.6mm 195.2mm 16.5mm 17mm
HMs710
A B C D
183.1mm 264.5mm 16.5mm 17mm

Product dimensions
15ACGM0198V3EN Version 3.0
HMs715
A B C D
248mm 398.6mm 26.5mm 17mm
HMs721
A B C D
325.6mm 534.1mm 26.5mm 17mm

Product dimensions
16 ACGM0198V3EN Version 3.0
Rear view of HMs707, HMs710, HMs715, HMs721
* HMs715 and HMs721 only

Unpacking and packing instructions
17ACGM0198V3EN Version 3.0
10. Unpacking and packing instructions
HMs705, HMs707, HMs710
HMs715, HMs721
To repack the product, please follow the instructions backwards.

Installation
18 ACGM0198V3EN Version 3.0
11. Installation
11.1 Installation environment
The product is not intended for continuous exposure to direct sunlight. There is a risk that the product
might be overheating.
The product is not intended for installation in contact with corrosive chemical compounds. Check the
resistance of the front panel lm to a specic compound before installation.
Do not use tools of any kind (screwdrivers, etc.) to operate the touchscreen of the product.
IP67 is guaranteed only if:
• An appropriate cable (JSCAxxxx) is used. The cables JSCAU001, JSCAU002, JSCAU003 and
JSCAU004 can be orderd as accessories.
• The max. deviation from the plane surface to the cutout is ≤0.5mm.
• The thickness of the case where the product is mounted is from 1.5mm to 3mm.
• The max. surface roughness where the gasket is applied is ≤120μm.
11.2 Installation procedure
For details on installation, please refer to the “Installation Guide” provided with the product.
D Cable
Max. 3mm JSCAxxxx (IP67)
Max. 10mm Standard Ethernet
Notice
Tightening torque: 1000Ncm (nut),130Ncm (screws)

Connections
19ACGM0198V3EN Version 3.0
12. Connections
12.1 Ethernet port
Pin Description
1 TX+
2 TX-
3 RX+
4 n/c
5 n/c
6 RX-
7 n/c
8 n/c
The Ethernet port has two LED status indicators.
(1) Red LED
O󰀨: Valid link has not been detected
On: Valid link has been detected
(2) Green LED
On: No activity
Flashes: Activity
12.2 Power supply, grounding, and shielding
The power is transmitted over a network cable (PoE).
NOTE
Make sure that the power supply has su󰀩cient power capacity for the operation of the product.
The product must always be grounded to earth with a shielded network cable (CAT5 or higher).
Grounding helps limit the e󰀨ects of noise due to electromagnetic interference on the control system.
Earth connection can also be done using the screw located near the connector. A label identies the
ground connection.
All the electronic devices in the control system must be properly grounded. Grounding must be
performed according to applicable regulations.
Reserved
(1) (2)

Battery
20 ACGM0198V3EN Version 3.0
13. Battery
The touch terminals are equipped with rechargeable lithium batteries that are not user-replaceable.
The battery is needed to keep the real-time clock running (date and time).
When the touch terminal is installed for the rst time, the battery must be charged for 48 hours. When
the battery is fully charged, data backup at 25°C is guaranteed for 3 months.
This symbol indicates the battery location.
HMs705
HMs707