Paradox TM50 Touch User manual

ALARM SYSTEM INSTRUCTION
SHEET
TM50 Touch Keypad
_____________________________________________________________________
Full Arming
Press and hold the (ARM) key for 3 seconds to arm all zones on the alarm system.
60 Seconds Arming time.
_____________________________________________________________________
Sleep Arming
Press and hold the (SLEEP) key for 3 seconds to arm all Sleep zones.
60 Seconds silent Sleep Arming time.
Sleep Zones.
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
_____________________________________________________________________
Stay Arming
Press and hold the (STAY) key for 3 seconds to arm all Stay zones.
60 Seconds silent Stay Arming time.
Stay Zones.
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
To turn Alarm OFF in ARM – SLEEP – STAY mode.

Push in (USER CODE) 20 Second’s entry time.
TM50 TOUCH CODE PAD. CHANGING CODES.
Push “MENU” button.
Push “SYSTEM SETUP” button.
Entry your “PIN CODE” on the Key Pad.
Push “USER” button.
Select code location you want to change or add.
Eg.
System Master.
Master 1.
Master 2.
Code 3.
Code 4.
Code 5.
Code 6.
Code 7.
Code 8.
Entry a new “PIN CODE”
Push “SAVE” button on top right hand corner of Key Pad.
Confirm new “PIN CODE”
Push “SAVE” button on top right hand corner of Key Pad.
Push “SKIP” Button
Push the “HOUSE” symbol on the top left hand corner of Key Pad to exit code
change menu .