Parker IQAN-LC5-C02 User manual

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR
SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide
product and/or system options for further investigation by users having technical expertise. It is important that you analyze
all aspects of your application, including consequences of any failure, and review the information concerning the product or
system in the current product catalogue. Due to the variety of operating conditions and applications for these products or
systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products
and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing,
are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Installation IQAN-LC5-C02, -C03
master module
IQAN-LC5-C02/C03
Publ.no: HY33-8405-IS/UK
Ed. 02/2013
For further information see:
HY33-8404-IB/UK Instructions IQAN-LC5-C0x
(2004/108/EC)
60
80
100
125
20
0
-20
-40
-40 - +85°C
40
WARNING
Eng.no: M5036041A
Rev. C
Command
+100%
0%
-100%
-18° 18°
Neutral
position
Axis DAC
Deflection
Mounting
Ø92 mm
M5
Tt=1 Nm
Ø108 mm
45°
Ø92 mm
80 mm
M5
80 mm
Tt=1 Nm
Alternate hole dimensions
Mounting hole dimensions

Wiring diagram, IQAN-LL-2U, -Nxx compatible
Pin Pos. Signal/Function C2 Pin Pos. Signal/Function
12 +VREF 1 -VREF
11 Not used 2 VIN-A
DIN-G**
10 DIN-F 3 VIN-B
DIN-H**
9 DIN-E 4 DIN-A
8 DIN-D 5 DIN-B
7 DOUT-A 6 DIN-C
Pin Pos. Signal/Function C1 Pin Pos. Signal/Function
6 +BAT (12/24Vdc) 1 GND
5 CAN-H 2 CAN-L
4 ADDR-H 3 ADDR-L
54
3
2
1
6
Pin Pos. Signal/Function C3 Pin Pos. Signal/Function
6 +VREF 1 -VREF
5* DIN-L
(DIN-J)
2* DIN-I
(DIN-G)
4* DIN-K
(DIN-I)
3* DIN-J
(DIN-H)
54
3
2
1
6
5
4
3
2
1
12 11 10 9 8 7
6
NOTICE
Connectors must be properly installed
to meet environmental specification.
• Sealing plugs must be inserted in
all unused pin positions.
• All connectors must be installed.
C3
C2
C1
Mating connectors kit: 5035007 * IQANdesign/(IQANdevelop) internal
channels, not used on IQAN-LL-2U
** used in IQANdesign only.
Wiring diagram, IQAN-LL-3G compatible
Pin Pos. Signal/Function C2 Pin Pos. Signal/Function
12 +VREF 1 -VREF
11 Not used 2 VIN-A
DIN-G**
10 DIN-F 3 VIN-B
DIN-H**
9 DIN-E 4 DIN-A
8 DIN-D 5 DIN-B
7 DOUT-A 6 DIN-C
Pin Pos. Signal/Function C1 Pin Pos. Signal/Function
6 +BAT (12/24Vdc) 1 GND
5 CAN-H 2 CAN-L
4 ADDR-H 3 ADDR-L
54
3
2
1
6
Pin Pos. Signal/Function C3 Pin Pos. Signal/Function
6 +VREF 1 -VREF
5* DIN-L
(DIN-J)
2 DAC-ZP
4* DIN-K
(DIN-I)
3 DAC-ZS
54
3
2
1
6
5
4
3
2
1
12 11 10 9 8 7
6
NOTICE
Connectors must be properly installed
to meet environmental specification.
• Sealing plugs must be inserted in
all unused pin positions.
• All connectors must be installed.
C3
C2
C1
Mating connectors kit: 5035007 * IQANdesign/(IQANdevelop) internal
channels, not used on IQAN-LL-3G
** used in IQANdesign only.
IQAN-LC5-C02-U2 IQAN-LC5-C03-G

IQAN-LC5-C02
90
105
105
49 80
Ø 6 (8x)
80
M12 x 1.25
(Ø 108)
Alternative mounting holes
28
10
12
unit = mm
stem detail
IQAN-LC5-C02
-MPB2W0T0 handle shown
(option to replace IQAN-LL-N2)
unit = mm
Y+ direction indicator

Adapter cable default connection, position C2:10, DIN-F.
Move wire to position C2:7 to get DOUT function.
NOTICE
Adapter cable 2830018 will connect
IQAN-LC5-C02 or IQAN-LC5-C03 to
an IQAN-LL harness.
• Adapter cable is configured for
use of DIN-F.
• To use DOUT, move wire in 12
pos. connector C2.
6
5
4
3
2
1
78910 11 12
C2:7
DOUT
C2:10
DIN-F
IQAN-LL adapter cable
unit = mm
IQAN-LC5-C03-G
-G handle