Parker ac890 User manual

AC890
Frame E & F with STO SIL3/PLe
HA469315U004 Issue 6 Compatible with Software Version 3.9 onwards
Product Manual
aerospace
climate control
electromechanical
filtration
fluid & gas handling
hydraulics
pneumatics
process control
sealing & shielding
ENGINEERING YOUR SUCCESS.

HA468445U003
AC890 Engineering Reference
Product Manual : Frames
E & F with STO SIL3/PLe
HA469315U004 Issue
6
Compatible with Software Version 3.9 onwards
2014 Parker Hannifin Manufacturing Limited.
All rights strictly reserved. No part of this document may be stored in
a retrieval system, or transmitted in any form or by any means to
persons not employed by a Parker Hannifin Manufacturing Limited
company without written permission from Parker Hannifin
Manufacturing Ltd. Although every effort has been taken to ensure
the accuracy of this document it may be necessary, without notice,
to make amendments or correct omissions. Parker Hannifin
Manufacturing Limited cannot accept responsibility for damage,
injury, or expenses resulting therefrom.
WARRANTY
The general terms and conditions of sale of goods and/or services
of Parker Hannifin Europe Sarl, Luxembourg, Switzerland Branch,
Etoy, apply to this product unless otherwise agreed. The terms and
conditions are available on our website
www.parker.com/termsandconditions/switzerland
Parker Hannifin Manufacturing Limited reserves the right to change
the content and product specification without notice.

890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED
ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and
authorized distributors provide product or system options for further investigation by users having
technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection
of the system and components and assuring that all performance, endurance, maintenance, safety
and warning requirements of the application are met. The user must analyze all aspects of the
application, follow applicable industry standards, and follow the information concerning the
product in the current product catalogue and in any other materials provided from Parker
Hannifin Corporation or its subsidiaries or authorized distributors.
To the extent that Parker Hannifin Corporation or its subsidiaries or authorized distributors provide
component or system options based upon data or specifications provided by the user, the user is
responsible for determining that such data and specifications are suitable and sufficient for all
applications and reasonably foreseeable uses of the components or systems.
The above disclaimer is being specifically brought to the user’s attention and is in addition to and
not in substitution to the Exclusions and Limitations on Liability which are set out in the terms and
conditions of sale.

Safety 1-1
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
Chapter 1
Safety
Please read these important Safety notes before installing and operating this equipment.
Caution
CAUTION notes in the manual warn of danger
to equipment.
WARNING
WARNING notes in the manual warn of
danger to personnel.

1-2 Safety
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
9
Requirements
IMPORTANT Please read this information BEFORE installing the equipment.
Intended Users
This manual is to be made available to all persons who are required to install, configure or service
equipment described herein, or any other associated operation.
The information given is intended to highlight safety issues, and to enable the user to obtain maximum
benefit from the equipment.
Complete the following table for future reference detailing how the unit is to be installed and used.
INSTALLATION DETAILS
Model Number
(see product label)
Where installed
(for your own information)
Unit used as a:
(refer to Certification)
Component Relevant Apparatus Unit fitted: Wall-mounted Enclosure
Application Area
The equipment described is intended for industrial motor speed control utilising AC induction or AC
synchronous machines.
Personnel
Installation, operation and maintenance of the equipment should be carried out by qualified personnel. A
qualified person is someone who is technically competent and familiar with all safety information and
established safety practices; with the installation process, operation and maintenance of this equipment; and
with all the hazards involved.

Safety 1-3
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
Product Warnings
Caution
Risk of electric shock
Caution
Refer to documentation
Earth/Ground
Protective Conductor
Terminal
Hazards
DANGER! - Ignoring the following may result in injury
1. This equipment can endanger life by exposure to
rotating machinery and high voltages.
2. The equipment must be permanently earthed due to
the high earth leakage current, and the drive motor
must be connected to an appropriate safety earth.
3. Ensure all incoming supplies are isolated before
working on the equipment. Be aware that there may
be more than one supply connection to the drive.
4. There may still be dangerous voltages present at
power terminals (motor output, supply input phases,
DC bus and the brake, where fitted
) when the motor is
at standstill or is stopped.
5. For measurements use only a meter to IEC 61010 (CAT III or
higher). Always begin using the highest range.
CAT I and CAT II meters must not be used on this product.
6. Allow at least 5 minutes for the drive's capacitors to discharge
to safe voltage levels (<50V). Use the specified meter capable
of measuring up to 1000V dc & ac rms to confirm that less
than 50V is present between all power terminals and between
power terminals and earth.
7.
Unless otherwise stated, this product must NOT be dismantled.
In the event of a fault the drive must be returned. Refer to
"Routine Maintenance and Repair".

1-4 Safety
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
9
WARNING! - Ignoring the following may result in injury or damage to equipment
SAFETY
Where there is conflict between EMC and Safety requirements, personnel safety shall always take precedence.
•Never perform high voltage resistance checks on the
wiring without first disconnecting the drive from the
circuit being tested.
•Whilst ensuring ventilation is sufficient, provide guarding
and /or additional safety systems to prevent injury or
damage to equipment.
•When replacing a drive in an application and before
returning to use, it is essential that all user defined
parameters for the product’s operation are correctly
installed.
•All control and signal terminals are SELV, i.e. protected
by double insulation. Ensure all external wiring is rated
for the highest system voltage.
•Thermal sensors contained within the motor must have at
least basic insulation.
•All exposed metalwork in the Inverter is protected by
basic insulation and bonded to a safety earth.
•RCDs are not recommended for use with this product but,
where their use is mandatory, only Type B RCDs should
be used.
EMC
•In a domestic environment this product may cause radio
interference in which case supplementary mitigation
measures may be required.
•This equipment contains electrostatic discharge (ESD)
sensitive parts. Observe static control precautions when
handling, installing and servicing this product.
•This is a product of the restricted sales distribution class
according to IEC 61800-3. It is designated as
“professional equipment” as defined in EN61000-3-2.
Permission of the supply authority shall be obtained
before connection to the low voltage supply.

Safety 1-5
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
CAUTION!
APPLICATION RISK
•The specifications, processes and circuitry described herein are for guidance only and may need to be adapted to the
user’s specific application. We can not guarantee the suitability of the equipment described in this Manual for individual
applications.
RISK ASSESSMENT
Under fault conditions, power loss or unintended operating conditions, the drive may not operate as intended. In particular:
•Stored energy might not discharge to safe levels as
quickly as suggested, and can still be present even
though the drive appears to be switched off
•The motor's direction of rotation might not be controlled
•The motor speed might not be controlled
•The motor might be energised
A drive is a component within a drive system that may influence its operation or effects under a fault condition.
Consideration must be given to:
•Stored energy •Supply disconnects •Sequencing logic •Unintended operation

1-6 Contents
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
Contents........................................................................................... Page No.
Chapter 1 Safety .................................................................................... 1-1
Chapter 2 Getting Started ................................................................ 2-1
About this Manual ....................................................................... 2-2
Equipment Inspection................................................................... 2-4
Packaging and Lifting Details ....................................................... 2-4
Chapter 3 Product Overview............................................................ 3-1
Product Range ............................................................................. 3-2
Functional Diagrams.................................................................... 3-5
Keypads ...................................................................................... 3-7
Option Cards .............................................................................. 3-8
Chapter 4 890CS & 890CD Common Bus Units ........................... 4-1
Step 1: Mechanical Installation..................................................... 4-2
Step 2: Connecting Power.......................................................... 4-14
Step 2: Connecting Power.......................................................... 4-15
Step 3: Control Connections ...................................................... 4-27
Step 4: Checking the System ...................................................... 4-40
Powering-up the System ............................................................. 4-44
Configure the 890CD Common Bus Drive.................................. 4-47
Initial Start-Up Routines.............................................................. 4-64
Chapter 5 890SD Standalone Drive............................................... 5-1
Step 1: Mechanical Installation..................................................... 5-2
Step 2: Connecting Power.......................................................... 5-10
Step 2: Connecting Power.......................................................... 5-11
Step 3: Control Connections ...................................................... 5-20
Step 4: Powering-up the Unit ..................................................... 5-30
Step 5: Run the Motor ................................................................ 5-45
Chapter 6 Safe Torque Off................................................................... 6-1
General Information.....................................................................6-2
STO Function Description .............................................................6-3
Alignment to European Standards.................................................6-4
Safety Specification.......................................................................6-7
User Connections .........................................................................6-8
STO Inputs Specification .............................................................6-10
STO Output Specification............................................................6-10
STO Truth Table .........................................................................6-11
STO Input Timing Diagrams .......................................................6-12
STO State Transition Diagram.....................................................6-16
STO Trip Annunciation ...............................................................6-17
Safety Warnings and Limitations .................................................6-18
Example User Wiring ..................................................................6-21
STO Function Checking ..............................................................6-29
Comprehensive check.......................................................................6-30
Regular check.............................................................................6-34
Chapter 7 Associated Equipment.................................................... 7-1
Main Points ..................................................................................7-2
890CS : AC Line Reactors.............................................................7-3
External Braking Resistors .............................................................7-5
Dynamic Brake Resistor Overload Protection...........................................7-10
890CS Semiconductor Protection Fuses.......................................7-12
890CD Semiconductor Protection Fuses ......................................7-13
Circuit Breakers ..........................................................................7-14
Filters .........................................................................................7-15

Contents 1-7
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
Contents........................................................................................... Page No.
Chapter 8 Operating the Drive ....................................................... 8-1
Control Philosophy ...................................................................... 8-2
Start/Stop and Speed Control....................................................... 8-3
Starting and Stopping Methods .................................................... 8-8
Application Advice ..................................................................... 8-18
Chapter 9 The Keypad ...................................................................... 9-1
Introduction ................................................................................. 9-2
6511 Keypad............................................................................... 9-3
6901 Keypad............................................................................... 9-9
6901 Keypad............................................................................. 9-16
Remote Mounting the Keypad .................................................... 9-40
Chapter 10 Keypad Menus............................................................ 10-1
890CS Common Bus Supply ...................................................... 10-2
890 Common Bus/890 Standalone Drive................................... 10-3
Chapter 11 Trips and Fault Finding .............................................11-1
Trips.......................................................................................... 11-2
Fault Finding ........................................................................... 11-23
Chapter 12 Routine Maintenance and Repair ..........................12-1
Routine Maintenance ................................................................. 12-2
Repair ....................................................................................... 12-2
Appendix A Options ..........................................................................A-1
Option Cards .............................................................................. A-2
Contents........................................................................................... Page No.
Appendix B Sequencing Logic......................................................... B-1
Principle State Machine.................................................................B-2
External Control of the Drive.........................................................B-8
Appendix C Certification ................................................................... C-1
What is the EMC Directive?(2004/108/EC) .................................. C-2
Definition of Working Environments ............................................. C-4
General Installation EMC Considerations ..................................... C-5
Emissions .................................................................................... C-7
European Directives and the CE Mark ........................................ C-14
Appendix D Programming..............................................................D-1
Programming with Block Diagrams .............................................. D-2
Modifying a Block Diagram ......................................................... D-3
Function Block Descriptions ......................................................... D-4
Parameter Specifications.......................................................... D-188
Parameter Table: PREF Number Order.................................... D-190
Product Related Default Values ................................................ D-251
Appendix E Technical Specifications................................................E-1
Understanding the Product Code .................................................. E-2

2-1
Getting Started
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
10
11
A
B
C
D
7
8
9
1
3
4
5
6
E
Chapter 2
Getting Started
A few things you should do when you first receive the unit.
♦How the manual is organised
♦
Initial steps
♦Inspect the unit for transit damage
♦
Packaging and lifting

Getting Started
2-2
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
8
9
10
11
A
B
C
D
1
3
4
5
6
7
E
About this Manual
IMPORTANT Motors used must be suitable for Inverter duty.
Note Do not attempt to control motors whose rated current is less than 25% of the drive rated current. Poor
motor control problems may occur if you do.
This manual is intended for use by the installer, user and programmer of the 890 drive. It assumes a
reasonable level of understanding in these three disciplines.
Note Please read all Safety information before proceeding with the installation and operation of this unit.
It is important that you pass this manual on to any new user of this unit.
How the Manual is Organised
This Engineering Reference manual is organised into chapters, indicated by the numbering on the edge of
each page.
Information for all 890 units is included (890CS Common Bus Supply, 890CD Common Bus Drive, 890SD
Standalone Drive).
The manual is more detailed than the relevant QuickStart manual, and so is of use to the unfamiliar as well
as the high-end user.

2-3
Getting Started
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
10
11
A
B
C
D
7
8
9
1
3
4
5
6
E
Initial Steps
Use the manual to help you plan the following:
Installation
Know your requirements:
•certification requirements, CE/UL/CUL conformance
•conformance with local installation requirements
•supply and cabling requirements
Operation
Know your operator:
•how is it to be operated, local and/or remote?
•what level of user is going to operate the unit?
•decide on the best menu level for the Keypad (where supplied)
Programming (using the 890 DSE Configuration Tool)
Know your application:
•create/install the most appropriate Application
•enter a password to guard against illicit or accidental changes
•customise the keypad to the application

Getting Started
2-4
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
8
9
10
11
A
B
C
D
1
3
4
5
6
7
E
Equipment Inspection
♦Check for signs of transit damage
♦Check the product code on the rating label conforms to your requirement.
If the unit is not being installed immediately, store the unit in a well-ventilated place away from high
temperatures, humidity, dust, or metal particles.
Storage and Shipping Temperatures
Storage Temperature : -25°C to +55°C Shipping Temperature : -25°C to +70°C
Refer to Appendix E: “Technical Specifications” to check the rating label/product code.
Refer to Chapter 12: “Routine Maintenance and Repair” for information on returning damaged goods.
Packaging and Lifting Details
Caution
The packaging is combustible. Igniting it may lead to the generation of lethal toxic fumes.
♦Save the packaging in case of return. Improper packaging can result in transit damage.
♦Use a safe and suitable lifting procedure when moving the unit. Never lift the unit by its terminal
connections.
♦Prepare a clear, flat surface to receive the drive before attempting to move it. Do not damage any
terminal connections when putting the unit down.

3-1
Product Overview
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
D
Chapter 3
Product Overview
An introduction to the 890 range of products, and a quick look at the Keypads and available plug
-
in Options.
♦Product range
♦
Functional diagrams
♦Keypads
♦
Option cards

Product Overview
3-2
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
Product Range
The 890 range is designed to control standard 3-phase ac induction motors and brushless servo motors.
There are three main types of 890:
890CS Common Bus Supply
The Common Bus Supply connects to AC and provides DC to
the Common Bus Drive (s).
890CD Common Bus Drive
The Common Bus Drive(s) receives DC from the Common Bus
Supply. It provides control for the motor.
The figure shows a Frame D Common Bus Supply linked to a
Frame E/F Common Bus Drive.
890SD Standalone Drive
The Standalone Drive is AC supplied
and provides control for the motor.
The figure shows a Frame E/F
Standalone Drive.

3-3
Product Overview
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
D
All kW ratings are at 400VAC, all HP ratings are at 460VAC.
The units are available in the following frame sizes:
890CS Common Bus Supply
FRAME B
FRAME D
32A AC
(Frame B1)
nominal full load input current
54A AC (Frame B2)
nominal full load input current
108A AC (Frame D1)
nominal full load input current
162A AC (Frame D2)
nominal full load input current
890CD Common Bus Drive
FRAME E
FRAME F
30 – 55kW
40 – 75 HP
Maximum 87A Constant
Maximum 105A Quadratic
nominal full load output current
55 – 110 kW
75 – 150 HP
Maximum 180A Constant
Maximum 205A Quadratic
nominal full load output current

Product Overview
3-4
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
890CS/890CD Selection
The required rating for the 890CS input stage can be calculated by adding up the sum of the motor currents
attached to the associated output stages. Refer to Appendix E: " Electrical Ratings: : 890CS - Calculation"
890SD Standalone Drive
FRAME E
FRAME F
30 – 55kW
40 – 75 HP
Maximum 87A Constant
Maximum 105A Quadratic
nominal full load output current
55 – 110 kW
75 – 150 HP
Maximum 180A Constant
Maximum 205A Quadratic
nominal full load output current

3-5
Product Overview
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
D
Functional Diagrams
L1 L2 L3
Half
Controlled
Rectifier
Switch
DBR+ DBR-
+24V OUT
DIGIN 1
ENABLE
AOUT MODE
AOUT
0V OUT
X02
890CS Common Bus Supply
PROCESSOR
AUXILIARY
SUPPLY
X01 +24V
0V
+24V
0V
VOLTAGE SELECTOR
M1 M2 M3
DC+
DC-
U V W
890CD Common Bus Drive
PROGRAMMING
PORT mini-USB
X13
DIN1
DIN2
DIN3
DIN4
DIN5
DIN6
DIN7
DIN8/DOUT1
DIN9/DOUT2
X15
DIGITAL I/O
INTERFACE
KEYPAD
INTERFACE
KEYPAD
HMI REMOTE
PROGRAMMING
PORT
RS232
0V
AIN1
AIN2
AIN3
AIN4
AOUT1
AOUT2
+10V
-10V
ANALOG I/O
X12
X11 PUMR A POS
PUMR A NEG
PUMR B POS
PUMR B NEG
CONNECTOR
(for future use)
X14 A
24V
B
0V
HMI REMOTE
PROGRAMMING
PORT
RS232
X04
PRE-TRIP WARNING
HEALTH
X03
S1
X10
OPTION F
SPEED
INTERFACE
FEEDBACK
OPTIONA
OPTION B
FIELDBUS
INTERFACE
COMMS
FIELDBUS
INTERFACE
COMMS
Busbars
DC+ DC-
A
BDOUT4
A
BDOUT5
A
BDOUT6
NC (not connected)
MTR THRM A
MTR THRM B
DIGITAL I/O
X16
CONNECTOR
(for future use)
DOUT3
Figure 3.1 Functional Block Diagram of 890CS Common Bus Supply & 890CD Common Bus Drive

Product Overview
3-6
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
Figure 3.2 Functional Block Diagram of 890SD Standalone Drive
L1 L2 L3
M1 M2 M3
DC+
DC-
U V W
890SD Standalone Drive
PROGRAMMING
PORT mini-USB
X13
DIN1
DIN2
DIN3
DIN4
DIN5
DIN6
DIN7
DIN8/DOUT1
DIN9/DOUT2
X15
DIGITAL I/O
INTERFACE
KEYPAD
HMI REMOTE
PROGRAMMING
PORT
RS232
0V
AIN1
AIN2
AIN3
AIN4
AOUT1
AOUT2
+10V
-10V
ANALOG I/O
X12
X11 PUMR A POS
PUMR A NEG
PUMR B POS
PUMR B NEG
CONNECTOR
(for future use)
X14 A
24V
B
0V
X10
OPTIONA
FIELDBUS
INTERFACE
COMMS
DBR+
DBR-
Diode
Bridge
CONNECTOR
(for future use)
OPTION F
SPEED
INTERFACE
FEEDBACK
OPTION B
FIELDBUS
INTERFACE
COMMS
DOUT3
A
BDOUT4
A
BDOUT5
A
BDOUT6
NC (not connected)
MTR THRM A
MTR THRM B
DIGITAL I/O
X16