PARKIT360°/ TRANSFORMER 15K MANUAL
6
OPERATION
YOUR TRANSFORMER HAS 2 MOTORS.
EACH MOTOR HAS TWO DRIVE MODES:
FREEWHEEL MODE SWITCHING GEAR
Neutral. For moving the Unit to
and from your application without
power while it is NOT under load.
locked in the drive position.
forwards or backwards before stopping.
Rock the unit so the wheels rest in between these
two stop points.
Pull on the Knob and turn it clockwise. Rest the
small pin on the outer metal, not in the pin hole.
Repeat on the other side of the Unit.
ENGAGED MODE SWITCHING GEAR
Drive. For connecting the Unit to
your hitch and moving the trailer
with battery power.
Ensure your unit is in position and ready to
connect to your trailer.
Pull on the Knob and turn it clockwise.
Ensure that the small pin ts into the slot.
Repeat on the other side of the Unit.
Rock the unit back and forth. The knob will pop in
Drive.
You’re now ready to connect to your hitch and
move the trailer!
ENSURE BOTH MOTORS ARE IN THE SAME GEAR BEFORE OPERATING.
PULL ON THE KNOB AND
TURN IT CLOCKWISE.
REST PIN OUTSIDE.
PULL ON THE KNOB AND
TURN IT CLOCKWISE.
PLACE PIN INSIDE.
LEFT
RIGHT
