Parkside PLLA 12 B2 User manual

CORDLESS LED WORK LIGHT
AKKU-LED-ARBEITSLICHT 12 V
BALADEUSE LED
RECHARGEABLE 12 V PLLA 12 B2
BALADEUSE LED
RECHARGEABLE 12 V
Traduction des instructions d’origine
AKKU-LED-ARBEITSLICHT 12 V
Originalbetriebsanleitung
CORDLESS LED
WORK LIGHT 12V
Translation of the original instructions
AKU PRACOVNÍ
LED SVĚTLO 12 V
Překlad originálního provozního návodu
ACCU-LED-WERKLAMP
Vertaling van de originele gebruiksaanwijzing
AKU LED PRACOVNÉ
SVETLO 12 V
Preklad originálneho návodu na obsluhu
AKUMULATOROWA
LAMPA ROBOCZA LED 12 V
Tłumaczenie oryginalnej instrukcji obsługi
LUZ DE TRABAJO LED
RECARGABLE 12 V
Traducción del manual de instrucciones original
BATTERIDREVEN
LED-ARBEJDSLAMPE
Oversættelse af den originale driftsvejledning
IAN 359702_2101

GB Translation of the original instructions Page 1
DE Originalbetriebsanleitung Seite 23
FR Traduction des instructions d’origine Page 45
NL Vertaling van de originele gebruiksaanwijzing Pagina 73
CZ Překlad originálního provozního návodu Strana 95
PL Tłumaczenie oryginalnej instrukcji obsługi Strona 117
SK Preklad originálneho návodu na obsluhu Strana 141
ES Traducción del manual de instrucciones original Página 163
DK Oversættelse af den originale driftsvejledning Side 185

12 V max.
10,8 V
Alle Parkside Geräte und die Ladegeräte
PLGK12A1/A2/B2/PDSLG 12 A1 der X12V Team Serie sind
mit dem Akku-Pack PAPK12A1/A2/A3/B1/C1 kompatibel.
All Parkside tools and the chargers
PLGK12A1/A2/B2/PDSLG 12 A1 of the X12V Team series are
compatible with the PAPK12A1/A2/A3/B1/C1 battery pack.
Tous les outils Parkside et les chargeurs
PLGK12A1/A2/B2/PDSLG 12 A1 de la série X12V Team sont
compatibles avec la batterie PAPK12A1/A2/A3/B1/C1.

Ladezeiten
Charging times
Temps de charge
Ladeströme
Charging currents
Courants de charge
2 Ah
Batterie
Battery pack
Batterie
PAPK 12 A1
2 Ah
Batterie
Battery pack
Batterie
PAPK 12 A2/A3
2,5 Ah
Batterie
Battery pack
Batterie
PAPK 12 C1
4 Ah
Batterie
Battery pack
Batterie
PAPK 12 B1
max. 2,4 A
· PLGK 12 A1/A2
Ladegerät · Charger · Chargeur
60 min
2,4 A
60 min
2,4 A
80 min
2,4 A
120 min
2,4 A
max. 4,5 A
· PLGK 12 B2
Ladegerät · Charger · Chargeur
60 min
2,4 A
45 min
3,5 A
55 min
3,8 A
60 min
4,5 A
max. 4,5 A
·
PDSLG 12 A1
Ladegerät · Charger · Chargeur
60 min
2,4 A
45 min
3,5 A
55 min
3,8 A
60 min
4,5 A

PLLA 12 B2 GB│IE │ 1 ■
Contents
Introduction........................................ 2
Intended use.................................................2
Features ....................................................2
Package contents .............................................3
Technical specifications ........................................3
General power tool safety warnings ................... 5
1. Work area safety...........................................5
2. Electrical safety ............................................5
3. Personal safety.............................................6
4. Power tool use and care .....................................7
5. Use and handling of the cordless electrical power tool..............8
6. Service ...................................................9
Safety guidelines for battery chargers .............................9
Safety instructions for cordless lamps............................ 10
Before use ........................................11
Removing/charging/inserting the battery pack....................... 11
Operation ........................................12
Switching on and off ........................................ 12
Battery charge level ......................................... 12
Swivelling the cordless LED working light......................... 12
Magnetic holder............................................ 13
Belt clip................................................... 13
Tripod thread .............................................. 13
Maintenance and cleaning...........................13
Disposal..........................................14
Kompernass Handels GmbH warranty ................15
Service ...........................................18
Importer .........................................18
Translation of the original Conformity Declaration.......19
Ordering a replacement battery......................21
Telephone ordering ......................................... 21

PLLA 12 B2■ 2 │ GB│IE
CORDLESS LED WORK LIGHT 12V PLLA 12 B2
Introduction
Congratulations on the purchase of your new appliance. You have
chosen a high-quality product. The operating instructions are part
of this product. They contain important information about safety,
usage and disposal. Before using the product, please familiarise yourself with
all of the operating and safety instructions. Use the product only as described
and for the range of applications specified. Please also pass these operating
instructions on to any future owner.
Intended use
This cordless LED working light is used to illuminate dry, poorly lit interior
areas, such as garages, cellars or attics.
The cordless LED working light is not suitable for lighting rooms in houses.
Any other usage or modification of the cordless LED working light is deemed
to be improper and carries a significant risk of accidents. The manufacturer
accepts no responsibility for damage attributable to misuse. This appliance
is not intended for commercial use. The luminaire is intended for normal
operation.
Features
1Cordless LED working light
2ON/OFF switch
3Battery display LED
4Release buttons
5Battery pack*
6Belt clip

PLLA 12 B2 GB│IE │ 3 ■
7Magnet
81/4” internal thread for tripod
9High-speed battery charger*
0Control LED
qCharge level indicator LED
Package contents
1 cordless LED work light 12V
1 set of operating instructions
Technical specifications
Cordless LED Work Light 12V PLLA 12 B2
Rated voltage 12 V (DC)
Rated power Pmax 5 W
Number of LEDs 10
Luminous flux 480 lm
Brightness levels 2
Protection class III/ (protection through extra-low voltage)
Protection Class IP20: Protection against penetration of solid
foreign bodies with a diameter > 12.5 mm, no
protection against water.
This is a special product which can withstand extreme vibrations.

PLLA 12 B2■ 4 │ GB│IE
Battery PAPK 12 A2*
Type
LITHIUM ION
Rated voltage 12 V (DC)
Capacity 2000 mAh/24 Wh
Cells 3
High-speed battery charger PLGK 12 A1*
INPUT
Rated voltage 220–240 V ∼ (AC), 50–60 Hz
Power consumption 50 W
Fuse (internal) 2 A
T2A
OUTPUT
Rated voltage 12 V (DC)
Rated current 2.4 A
Charging time approx. 60 min
Protection class II/ (double insulation)
* BATTERY AND CHARGER ARE NOT INCLUDED

PLLA 12 B2 GB│IE │ 5 ■
General power tool safety warnings
WARNING!
► Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the safety instructions refers to your mains-operated
(with power cord/AC adapter) power tools or battery-operated (cordless)
power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite acci-
dents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control of the appliance.
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.

PLLA 12 B2■ 6 │ GB│IE
c) Do not expose power tools to rain or wet conditions. Water entering
apower tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inat-
tention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.

PLLA 12 B2 GB│IE │ 7 ■
e) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collec-
tion facilities, ensure these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
4. Power tool use and care
a) Do not force the power tool. Use the correct power tool for your appli-
cation. The correct power tool will do the job better and safer at the rate
for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing accesso-
ries, or storing power tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power
tools.

PLLA 12 B2■ 8 │ GB│IE
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
5. Use and handling of the cordless electrical power tool
a) Charge a rechargeable battery unit using only the charger recom-
mended by the manufacturer. Chargers are often designed for a partic-
ular type of rechargeable battery unit. There is the danger of fire if other
types of rechargeable battery units are used.
b) Only the rechargeable battery units supplied are to be used with an
electrical power tool. The use of other rechargeable batteries may lead
to a risk of injury or fire.
c) When they are not being used, store rechargeable battery units away
from paperclips, coins, keys, nails, screws or other small metal objects
that could cause the contacts to be bridged. Short-circuiting the contacts
of a rechargeable battery unit may result in heat damage or fire.
d) Fluids may leak out of rechargeable battery units if they are misused.
If this happens, avoid contact with the fluid. If contact occurs, flush the
affected area with water. Seek additional medical help if any of the
fluid gets into your eyes. Escaping battery fluid may cause skin irritation
or burns.
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable batteries.
Protect the rechargeable battery from heat;
for example, from continuous exposure to sunlight, fire, water and
moisture. There is a risk of explosion.

PLLA 12 B2 GB│IE │ 9 ■
6. Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
Safety guidelines for battery chargers
■ This appliance may be used by children aged 8 years
and above and by persons with limited physical,
sensory or mental capabilities or lack of experience
and knowledge, provided that they are under super-
vision or have been told how to use the appliance
safely and are aware of the potential risks. Do not
allow children to use the appliance as a toy. Cleaning
and user maintenance tasks may not be carried out
by children unless they are supervised.
■ To avoid potential risks, damaged mains cables should
be replaced by the manufacturer, their customer service
department or a similarly qualified person.
The charger is suitable for indoor use only.
WARNING!
■ Do not operate the appliance with a damaged cable, power cord or
mains plug. Damaged power cords can result in danger to life due to
electric shock.

PLLA 12 B2■ 10 │ GB│IE
WARNING!
■ Do not use any accessories that are not recommended by PARKSIDE.
This can lead to an electric shock or fire.
NOTE!
► This charger can only charge the following batteries:
PAPK 12 A1/PAPK 12 A2/PAPK 12 A3/ PAPK 12 B1/PAPK 12 C1.
► A current list of battery compatibility can be found at
www.Lidl.de/Akku.
Safety instructions for cordless lamps
■Do not cover the appliance during operation.The cordless LED working
light heats up during operation and may cause burns.
■Do not look into the light beam. Do not direct the light beam at people
or animals.
■Do not allow children to use the appliance. You could inadvertently
dazzle other people or yourself.
■Keep the appliance away from magnetically sensitive devices and
magnetic data media. The magnet may cause irreversible loss of data.
■Check the durability of the appliance fastening. Dropping the appli-
ance may cause injury.
■ The light source of this appliance cannot be replaced. Once the light
source has reached the end of its lifespan, the entire lamp must be
replaced.

PLLA 12 B2 GB│IE │ 11 ■
Before use
Removing/charging/inserting the battery pack
CAUTION!
► Always unplug the appliance before you remove the battery pack 5
from or connect the battery pack to the high-speed battery charger 9.
NOTE
► The battery pack is supplied partially charged. Before first use, charge
the battery pack 5in the high-speed battery charger for at least
1hour. This ensures maximum performance of the battery pack 5.
You can charge the lithium-ion battery at any time without shortening
its service life. Interrupting the charging process does not damage the
battery pack 5.
► If the battery pack 5overheats during operation, it cannot be
charged. Allow it to cool down first.
■ Never charge the battery pack 5if the ambient temperature is below
10°C or above 40°C.
1. To remove the battery pack 5, press the release buttons 4and pull the
battery pack 5out of the appliance.
2. Insert the battery pack 5into the high-speed battery charger 9.
3. Insert the mains plug into the socket. The control LED 0lights up red .
4. The green charge level indicator LED qindicates that the charging
process is complete and the battery pack 5is ready for use.
5. Insert the battery pack 5into the appliance.

PLLA 12 B2■ 12 │ GB│IE
Operation
Never use the appliance for purposes other than those for which it was
designed and only with original parts/accessories. Using attachments or
accessory tools other than those recommended in the operating instructions
can lead to a risk of injury.
Switching on and off
Switching on
♦ Press the ON/OFF switch 2.
The appliance lights up at maximum brightness.
♦ To reduce the brightness, hold down the ON/OFF switch 2for
approx. 2 seconds.
To switch back to maximum brightness, press the ON/OFF switch 2
again for approx. 2 seconds.
Switching off
♦ Press the ON/OFF switch 2.
Battery charge level
■ The status will be shown on the battery display LED 3as follows:
RED/ORANGE/GREEN = maximum charge
RED / ORANGE = medium charge
RED = low charge – charge the battery
Swivelling the cordless LED working light
The cordless LED working light can be swivelled/adjusted into 8positions.
♦ Swivel the cordless LED working light 1by clicking it into one of the 8
positions.

PLLA 12 B2 GB│IE │ 13 ■
Magnetic holder
NOTE!
■ Bear in mind that sliding the appliance may scratch the magnetic
surface!
You can use the magnets 6to fix the appliance onto magnetic surfaces.
Belt clip
You can use the belt clip 6 to attach the appliance to a belt or similar.
Tripod thread
You can use the 1/4” internal thread 8to screw the appliance onto
a tripod (not included).
Maintenance and cleaning
WARNING! RISK OF INJURY!
Always switch the appliance off and remove the battery
before carrying out any work on the appliance.
■ The appliance is maintenance-free.
■ Remove all dirt from the appliance. Use a soft, dry cloth for this purpose.
■ Do not allow any liquids to get into the appliance.

PLLA 12 B2■ 14 │ GB│IE
Disposal
The packaging is made from environmentally friendly material
and can be disposed of at your local recycling plant.
Do not dispose of power tools in your normal household
waste!
European Directive 2012/19/EU requires that worn-out power
tools be collected separately and recycled in an environmentally
compatible manner.
Do not dispose of batteries in your normal household
waste! Incorrectly disposed of batteries can cause environ-
mental damage!
Defective or worn-out rechargeable batteries must be recycled
according to Directive 2006/66/EC. Take the battery pack and/or appli-
ance to a nearby collection facility.
Please consult your local authorities regarding suitable disposal of worn out
power tools/battery packs.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging
material components for disposal if necessary. The packaging
material is labelled with abbreviations (a) and numbers (b) with
the following meanings: 1–7: Plastics, 20–22: Paper and cardboard,
80–98: Composites.
Your local community or municipal authorities can provide
information on how to dispose of the worn-out product.
The product is recyclable, subject to extended producer
responsibility and is collected separately.

PLLA 12 B2 GB│IE │ 15 ■
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this
product has any faults, you, the buyer, have certain statutory rights. Your
statutory rights are not restricted in any way by the warranty described
below.
Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt
in a safe place. This will be required as proof of purchase.
If any material or manufacturing fault occurs within three years of the date of
purchase of the product, we will either repair or replace the product for you
or refund the purchase price (at our discretion). This warranty service requires
that you present the defective appliance and the proof of purchase (receipt)
within the three-year warranty period, along with a brief written description
of the fault and of when it occurred.
If the defect is covered by the warranty, your product will either be repaired
or replaced by us. The repair or replacement of a product does not signify the
beginning of a new warranty period.
X 12 V and X 20 V Team Series battery packs come with a 3-year warranty
valid from the date of purchase.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty.
This also applies to replaced and repaired components. Any damage and
defects present at the time of purchase must be reported immediately after
unpacking. Repairs carried out after expiry of the warranty period shall be
subject to a fee.