Partner PT-1630 User manual

POS Terminal
PT-1630
Sevice Manual

i
Copyright
This publication, including all photographs, illustrations and software, is protected under international
copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be
reproduced without written consent of the author.
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no representa-
tions or warranties with respect to the contents hereof and specically disclaims any implied warranties of
merchantability or tness for any particular purpose. The manufacturer reserves the right to revise this publi-
cation and to make changes from time to time in the content hereof without obligation of the manufacturer to
notify any person of such revision or changes.
Trademark recognition
All product names used in this manual are the properties of their respective owners and are acknowledged.
About this manual
The service manual provides service information for the PT-1630. This manual is designed to help train
service personnel to locate and x failing parts on the machine.
This manual consists of the following sections:
Chapter 1 Introducing:
This chapter starts with identifying components.
Chapter 2 BIOS Setup Utility:
The BIOS chapter provides information on navigating and changing settings in the BIOS Setup
Utility.
Chapter 3 Installing Drivers and Software:
This chapter provides information for installing drivers.
Chapter 4 Locating the Problem:
Refer to this chapter to locate the failing part or cause of the problem that requires servicing.
Chapter 5 Replacing Field Replaceable Units (FRUs):
This chapter provides drawings and instructions to replace all FRUs.
Appendix: Optional Components, Exploded Diagram, and Parts List:
The appendix includes an exploded diagram of the machine and the parts list and order number for
each part.
Safety information
Before servicing the machine, read the safety information under “Chapter 5 - Safety and precautions” .
Revision history
Version 1.0, October 2014

ii
FCC Statement
This device has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference
when the device is operated in a commercial environment. This device generates, uses and can radiate fre-
quency energy and, if not installed and used in accordance with this manual, may cause harmful interference
to radio communications. Operation of this device in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his/her own expense.
FCC WARNING
Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the device.
Best Management Practice (BMP) for Perchlorate Materials in
California States
This device includes perchlorate in the lithium battery.
Perchlorate material-special handling may apply when handling this device.
For detail, refer to http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
Vermont Mercury Management Rules
LCD display lamps contain mercury. Dispose of them properly.
CE Mark
This device complies with the requirements of the EEC directive 2004/108/EC with regard to “Electromag-
netic compatibility” and 2006/95/EC with regard to “Low Voltage Directive”.
Legislation and WEEE Symbol
2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment, collection, recycling and
disposal of electric and electronic devices and their components.
The crossed-out wheeled bin symbol on the device means that it should not be disposed of with other waste
at the end of its working life. Instead, the device should be delivered to a waste collection center for activation
of the treatment, collection, recycling and disposal procedure.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please
separate this device from other types of waste and recycle it responsibly to promote the sustainable reuse of
material resources.
Business users should contact their supplier and check the terms and conditions of the purchase contract
regarding its disposal.
It should not be mixed with other commercial waste for disposal.

iii
TABLE OF CONTENTS
CHAPTER 1 INTRODUCING........................................................ 1
Identifying components .................................................................................1
Connector pin dene......................................................................................3
CHAPTER 2 BIOS SETUP ........................................................... 7
About the Setup Utility ...................................................................................7
Entering the Setup Utility ..........................................................................8
BIOS navigation keys ................................................................................8
Using BIOS ...............................................................................................9
Main Screen.................................................................................................10
Advanced Menu ...........................................................................................11
PCI Subsystem Settings ..........................................................................12
PCI Express Settings...............................................................................13
ACPI Settings ..........................................................................................14
CPU Conguration...................................................................................15
SATA Conguration..................................................................................16
USB Conguration ...................................................................................17
Super IO Conguration ............................................................................18
Serial Port 1～5 Conguration .................................................................18
H/W Monitor.............................................................................................19
Smart Fan Mode Conguration................................................................20
Chipset Menu...............................................................................................21
PCH-IO Conguration..............................................................................21
PCI Express Conguration ......................................................................22
USB Conguration ...................................................................................22
PCI Azalia Conguration..........................................................................22
System Agent (SA) Conguration ............................................................23
Graphics Conguration ............................................................................23
Memory Conguration .............................................................................23
Boot Menu....................................................................................................24
Security Menu ..............................................................................................25
Exit Menu .....................................................................................................26
CHAPTER 3 INSTALLING DRIVERS AND SOFTWARE ........... 27
Driver auto installation..................................................................................27
Intel Chipset Driver.......................................................................................28
Intel Chipset Graphics Driver .......................................................................30
LAN Driver....................................................................................................32

iv
CHAPTER 4 LOCATING THE PROBLEM .................................. 35
General checkout guidelines........................................................................35
Cash drawer checkout .................................................................................35
Power symptoms..........................................................................................36
Network symptoms.......................................................................................37
USB symptoms ............................................................................................37
Peripheral-device symptoms........................................................................37
Boot symptoms ............................................................................................37
Mainboard jumper ........................................................................................38
Mainboard connectors..................................................................................40
CHAPTER 5 REPLACING FIELD REPLACEABLE UNITS (FRUs)
..................................................................................................... 41
Safety and precautions ................................................................................41
Before you begin..........................................................................................42
Replacing parts ............................................................................................42
Chassis Cover..............................................................................................43
Hard Disk Drive............................................................................................44
Memory ........................................................................................................45
Battery..........................................................................................................45
PCI PCB with Bracket ..................................................................................46
Mainboard ....................................................................................................46
Power Supply Unit........................................................................................47
CPU..............................................................................................................48
Installing a PCI Card ....................................................................................49
Installing the cable management box...........................................................51
Install the tray...............................................................................................52
Installing the LCD monitor stand..................................................................53
APPENDIX SPECIFICATION ...................................................... 55

v
LIST OF FIGURES
Figure 1.1 Front view .............................................................................. 1
Figure 1.2 Rear view............................................................................... 2
Figure 2.1 Main BIOS screen.................................................................. 8
Figure 2.2 Main Screen......................................................................... 10
Figure 2.3 Advanced Menu ....................................................................11
Figure 2.4 PCI Subsystem Settings ...................................................... 12
Figure 2.5 PCI Express Settings........................................................... 13
Figure 2.6 ACPI Settings....................................................................... 14
Figure 2.7 CPU Conguration............................................................... 15
Figure 2.8 SATA Conguration.............................................................. 16
Figure 2.9 USB Conguration ............................................................... 17
Figure 2.10 Super IO Conguration ...................................................... 18
Figure 2.11 H/W Monitor ....................................................................... 19
Figure 2.12 Chipset Menu..................................................................... 21
Figure 2.13 Boot Menu.......................................................................... 24
Figure 2.14 Security Menu.................................................................... 25
Figure 2.15 Exit Menu........................................................................... 26
Figure 4.1 Connecting a cash drawer ................................................... 36
Figure 4.2 PT-1630 mainboard jumper ................................................. 38
Figure 4.3 PT-1630 mainboard connectors........................................... 40

vi

1
CHAPTER 1
INTRODUCING
This chapter starts with identifying components. The following topics are described.
• Identifying components on page 1
1
2 3
4
Identifying components
This section describes the parts and connectors on the machine.
Front view
Figure 1.1 Front view
Component Description
1 USB port
2 LED Power Indicator
3 LED HDD Indicator
4 Power Button

2 CHAPTER 1 INTRODUCING
1 2 3 4 5 6 7 8 9
10 11
12
13 14 16
15 17
18 19
20
21
22
23
24
25
Connector Description
1 Fan hole
2 Power connector
3 COM4 port
4 COM3 port
5 COM5 port
6 USB24V (optional)
7 USB12V (optional)
8 USB12V (optional)
9 COM6 port
10 +24V 1A output
11 +12V 3.5A output
12 PS/2 port
13 USB 2.0 ports
Connector Description
14 USB 2.0 ports
15 RJ-45 LAN port
16 USB 3.0 ports
17 COM1 port
18 COM2 port
19 Primary VGA port
20 Secondary VGA port
21 MIC-In
22 Line-Out
23 Line-In
24 RJ-11 Cash drawer port
25 DC 12V out
Rear view
Figure 1.2 Rear view

3
15
69
Connector pin dene
This section describes the connectors pin dene.
COM connector pin dene
VGA connector pin dene
USB 2.0 connector pin dene
Pin Signal Pin Signal
1 DCD 6 DSR
2 SIN 7 RTS
3 SOUT 8 CTS
4 DTR 9 RI
5 GND
1 5
610
11 15
Pin Signal Pin Signal Pin Signal
1 Red 6 AGND 11 N/A
2 Green 7 AGND 12 DDC DAT
3 Blue 8 AGND 13 Horizontal Sync
4 N/A 9 N/A 14 Vertical Sync
5 GND 10 GND 15 DDC CLK
14
Pin Signal
1USB Vcc
2 USB -
3 USB +
4 USB GND

4 CHAPTER 1 INTRODUCING
RJ-11 Cash Drawer connector pin dene
LAN connector pin dene
1 6
1 8
Pin Signal
1 CASEOPEN2
2 CASH1
3 CASEOPEN1
4 24V
5 CASH2
6 GND
Pin Signal Pin Signal
1 TXA+ 5 TXC-
2 TXA- 6 TXB-
3 TXB+ 7 TXD+
4 TXC+ 8 TXD-
USB 3.0 connector pin dene
1
5
4
9
Pin Signal Pin Signal
1USB Vcc 6 StdA_SSTX-
2 USB - 7 GND_DRAIN
3 USB + 8 StdA_SSRX+
4 USB GND 9 StdA_SSRX-
5 StdA_SSTX+

5
DC 12V output connector pin dene
SATA connector pin dene
Pin Signal
1 +12V
2 GND
7 1
Pin Signal Pin Signal
1 GND 5 SATA_RX-
2 SATA_TX+ 6 SATA_RX+
3 SATA_TX- 7 GND
4 GND
1
2
PS/2 connector pin dene
1
3 4
5 6
2
Pin Signal
1 Keyboard Data
2 NC
3 GND
4 VCC
5 Keyboard Clock
6 NC

6 CHAPTER 1 INTRODUCING
USB 12V connector pin dene
USB 24V connector pin dene
1
5
4
8
1
5
4
8
Pin Signal Pin Signal
1 GND 5 GND
2 +12V 6 USB +
3 +12V 7 USB -
4 GND 8 USB Vcc
Pin Signal Pin Signal
1 GND 5 GND
2 +24V 6 USB +
3 +24V 7 USB -
4 GND 8 USB Vcc

7
CHAPTER 2
BIOS SETUP
The primary function of the BIOS (Basic Input and Output System) is to identify and initiate component
hardware. The BIOS parameters are stored in non-volatile BIOS memory (CMOS). CMOS contents don’t get
erased when the computer is turned off. The following topics are described in this chapter.
• About the Setup Utility on page 7
• Main Screen on page 10
• Advanced Menu on page 11
• Chipset Menu on page 21
• Boot Menu on page 24
• Security Menu on page 25
• Exit Menu on page 26
About the Setup Utility
The BIOS Setup Utility enables you to congure the following items:
• Hard drives, diskette drives, and peripherals
• Video display type and display options
• Password protection from unauthorized use
• Power management features
This Setup Utility should be used for the following:
• When changing the system conguration
• When a conguration error is detected and you are prompted to make changes to the Setup Utility
• When trying to resolve IRQ conicts
• When making changes to the Power Management conguration
• When changing the User or Supervisor password

8 CHAPTER 2 BIOS SETUP
Entering the Setup Utility
When you power on the system, BIOS enters the Power-On Self Test (POST) routines. POST is a series of
built-in diagnostics performed by the BIOS. After the POST routines are completed, the following message
appears:
Press DEL to run Setup
Press the delete key <Delete> to access the BIOS Setup Utility:
BIOS navigation keys
The BIOS navigation keys are listed below.
Key Function
← → Moves between the available menus
↑ ↓ Moves the cursor between the displayed parameters
+ – Modies the selected eld’s values
Enter Go to sub screen
F1 Displays a general help screen
F3 Loads the optimized congurations
F4 Saves the current conguration and exits Setup
Esc Exits the current screen
Figure 2.1 Main BIOS screen

9
Using BIOS
When you start the Setup Utility, the main screen appears. The main screen of the Setup Utility displays a list
of the options that are available. A highlight indicates which option is currently selected. Use the cursor arrow
keys to move the highlight to other options. When an option is highlighted, execute the option by pressing
<Enter>.
Some options lead to pop-up dialog boxes that prompt you to verify that you wish to execute that option.
Other options lead to dialog boxes that prompt you for information.
Some options (marked with a triangle ►) lead to sub screens that enable you to change the values for the
option. Use the cursor arrow keys to scroll through the items in the sub screen.

10 CHAPTER 2 BIOS SETUP
Main Screen
Once you enter AMI UEFI BIOS Setup Utility, the Main Menu will appear on the screen providing an
overview of the basic system information.
System Overview
This screen displays System BIOS Information, Processor, System memory, System Time and System Date.
BIOS Information
Shows system information including UEFI BIOS version, model name, marketing name, built date, etc.
Memory Frequency
Shows the system memory frequency.
Total Memory
Shows system memory size, VGA shard memory will be excluded.
System Date
Set the system date. Note that the ‘Day’ automatically changes when you set the date.
System Time
Set the system internal clock.
Access Level
Shows the access level of current user.
Figure 2.2 Main Screen

11
Advanced Menu
The Advanced Menu allows you to congure the settings of CPU, Super I/O, Power Management, and other
system devices.
Launch PXE OpROM
This item enables or disables boot Options for legacy network devices with option ROM. Options: Disabled
(Default) / Enabled
Launch Storage OpROM
This item enables or disables boot Options for legacy mass storage devices with option ROM. Options:
Enabled (Default) / Disabled
Launch Video OpROM
This item enables or disables execution of the legacy option ROM for video devices. Options: Enabled
(Default) / Disabled / Enabled when no UEFI Driver
Figure 2.3 Advanced Menu

12 CHAPTER 2 BIOS SETUP
PCI Subsystem Settings
PCI ROM Priority
In case of multiple option ROMs (Legacy and EFI Compatible), this item species what PCI Option ROM to
launch Options: Legacy ROM (Default) / EFI Compatible ROM
Above 4G Decoding
Enables or disables 64bit capable device to be decoded in above 4G address space (only if system support 64
bit PCI decoding). Options: Disabled (Default) / Enabled
PCI Latency Timer
This item sets the value to be programmed into PCI Latency Timer Register. Options: 32 PCI Bus Clocks
(Default) / 64 PCI Bus Clocks / 96 PCI Bus Clocks / 128 PCI Bus Clocks / 160 PCI Bus Clocks / 192 PCI
Bus Clocks / 224 PCI Bus Clocks / 248 PCI Bus Clocks
VGA Palette Snoop
Enables or disables VGA palette registers snooping. Options: Disabled (Default) / Enabled
PERR# Generation
Enables or disables PCI device to generate PERR#. Options: Disabled (Default) / Enabled
SERR# Generation
Enables or disables PCI device to generate SERR#. Options: Disabled (Default) / Enabled
Figure 2.4 PCI Subsystem
Settings