Partner Themis TI-890 User manual

Partner Tech Europe GmbH Page 1 (V1.4 2018)
Themis TI-890
Unpacking and Quick Start Guide
1. Unpack the box and check contents
The TI-890 and its accessories are
packed in a carton-box with foam
padding for protection during
shipment. Carefully unpack the
device and keep the packing
materials for future use.
Verify that all of the items shown
below are included in the box. If an
item is missing or appears to be
damaged, contact your Partner Tech
dealer immediately.
2. I/O panel
The I/O panel is located on the back-right side of LCD panel and there are:
-2 x USB 2.0 - 1 x Micro SD
-1 x RJ-45 Ethernet - 1 x Power-Socket
-1 x HDMI - 1 x Reset-Button
3. Start the TI-890
Connect the power supply at
the power socket located at
the I/O panel. The TI-890 will
boot automatically. At the
Boot-Menu you can select
the OS, which should be
start.
Default: After 10 seconds
will start Windows 10 Home

Partner Tech Europe GmbH Page 2 (V1.4 2018)
4. Switch operating system
On upper left corner at the Boot-Menu screen you can disable Boot-Menu by
removing check mark.
Important: After you disable Boot-Menu you can´t recover Boot-Menu back.
How to switch OS:
-from Android OS swipe down from top twice and click on OS SWITCH
icon, after that device will shut down and restart into Windows
-from Windows click desktop icon OS SWITCH, device will shut down
and start again into Android
5. Specification

Partner Tech Europe GmbH Page 3 (V1.4 2018)
6. Option “Additional Housing”
In order to obtain additions space for hiding power supply, PoE splitter or any
kind of cables, an optional additional housing is available.
The additional housing is made of 2 parts, which fit into each other. The rear
part of the housing (fixed to walls or VESA mounts) provides mounting holes,
VESA 100 and cable passes (round in the middle, oval at the lower side).
Power supplies, PoE Splitter or other devices can be fixed to the inner part of
the rear part of the housing.
The front part of the additional housing uses the VESA 75 holes to be fixed to
the rear side of TI-890. Cable and connectors can easily pass through to the
I/O plate of TI-890. An extra hole allows as well access to the security screw at
the rear part of TI-890. This allows opening of TI-890, while part of the
additional housing is still fixed to TI-890.
The 2 parts of the additional housing fit into each other and will be secured by
3 screws (left, right, bottom).
Front part to TI-890 back cover Rear part for wall or VESA fixing
7. Option “PoE Power Supply”
To provide power to TI-890 via LAN, an appropriate PoE-Splitter can be used
instead of the power supply. It is important, that the Splitter, in conjunction with
PoE Injector / PoE Switch, fulfils the 802.3 at standard. This standard is also
called the “PoE+” standard.
By using PoE as power source, the requirements are +5.5V DC ±10% and
>15Watt. The PoE Splitter / PoE Switch have to provide this power
requirement for each connected TI-890 system (port).
Note: In case if question please contact Partner Tech Europe to receive
detailed advice about powering the TI-890 via LAN network .
Possible solutions
PoE Injector
PoE Splitter
PoE Switch
The PoE Splitter fits into the TI-890 additional housing.

Partner Tech Europe GmbH Page 4 (V1.4 2018)
8. Dimensions TI-890 Terminal / Additional Housing
Rear View TI-890 Terminal
VESA 75
73mm73mm
60mm
60mm
73mm
68mm 68mm
73mm
Side View TI-890 Terminal

Partner Tech Europe GmbH Page 5 (V1.4 2018)
Rear View of TI-890 Additional Housing
200mm
222mm
VESA 100
28mm
28mm
55mm
66mm
66mm
50mm
The Rear Side of the „Additional Housing“ allows mounting to walls or
VESA devises.
Side View of TI-890 Additional Housing
200mm
35mm