Plunger Cart
2
012-10860C
• slipped over the platform on the PASCO Rotary
Motion Sensor.
Maintenance
The thread that supports the spherical weight is attached to
the back of the Angle Indicator with a hex screw.
Loosen the hex screw in order to replace the thread.
Technical Support
For assistance with any PASCO product, contact PASCO
at:
Replacement Parts
Check with Technical Support about possible replacement
parts:
More Information
For more information about the latest revision of this
Instruction Manual, visit:
www.pasco.com/manuals
and enter the Product Number.
For information about any PASCO product, what software
to use, and what other accessories are available, check the
PASCO web site.
Warranty, Copyright, and Trademarks
Limited Warranty For a description of the product warranty, see the
PASCO catalog. Copyright The PASCO scientific 012-10860C
Instruction Manual
is copyrighted with all rights reserved. Permission is
granted to non-profit educational institutions for reproduction of any part of
this manual, providing the reproductions are used only in their laboratories
and classrooms, and are not sold for profit. Reproduction under any other
circumstances, without the written consent of PASCO scientific, is
prohibited. Trademarks PASCO and PASCO scientific are trademarks
or registered trademarks of PASCO scientific, in the United States and/or
in other countries. All other brands, products, or service names are or may
be trademarks or service marks of, and are used to identify, products or
services of, their respective owners. For more information visit
www.pasco.com/legal.
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone: 916-462-8384 (worldwide)
800-772-8700 (U.S.)
Web: www.pasco.com
Item
Brass weight Hex screw
Thumbscrew Nylon thread
Square nut
