Patriot Lighting 0106-0003 User manual

14
36FT LED RGB
STRING LIGHT
Sku Numbers: 346-1102
Model Number: 0106-0003
PACKAGE CONTENTS
Note: Hardware not shown to actual size.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at
1-844-255-9692 Monday – Friday 8:00 a.m. – 5:00 p.m. CST
• When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live
trees in which the needles are brown and break o󰀨 easily. Keep the tree holder lled with water.
• If the product is placed on a tree, the tree should be well secured and stable.
• Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed
wire insulation or cords, cracks in the lamp-holders or enclosures, loose connections, or exposed copperwire.
• When storing the product, carefully remove the product from wherever it is placed, including trees, branches,
or bushes in order to avoid any undue strain or stress on the product conductors, connections, and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o󰀨 and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet di󰀨erent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CARE AND MAINTENANCE
1) The light does not come on at all:
a) Make sure the wall switch and circuit breaker are on.
2) One of the lamps has burned out.
a) Disconnect power to the string light. Remove e󰀨ected lamp by gently gripping lamp and then turning
in a counter-clockwise direction. Replace lamps only with 24V 0.5W S14 lamps provided. Align the groove on
the socket with the bolt on the lamp, then gently insert the lamp into the socket. Turn the lamp in a clockwise
direction until fully seated.
If unable to x any of the above issues, please consult a certied electrician.
TROUBLESHOOTING
RV1944
FIVE-YEAR LIMITED WARRANTY
PART DESCRIPTION QUANTITY
A 36Ft String Light 1
B 24V Plug-In Power Supply with Adaptor 1
C RGB+WW Bi-Pin S14 Lamps 20
D Handheld Remote Control 1
E CR2025 Battery 1
ABC
D E
Step 1 Step 2
Tuck in
Rotate
Patriot Lighting® is a registered trademark
of Menard, Inc. All Rights Reserved.
If, during normal use, this PATRIOT LIGHTING® lighting xture breaks or fails due to a defect in material and workmanship within
ve (5) years from the date of original purchase, simply bring this lighting xture with your original sales receipt back to your nearest
MENARDS® retail store. At its discretion, PATRIOT LIGHTING® agrees to have the product or any defective part(s) repaired or
replaced with the same or similar PATRIOT LIGHTING® product free of charge, within the stated warranty period, when returned by
the original purchaser with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs;
(2) does not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to persons/
property or costs. This warranty does give you specic legal rights and you may have other rights, which vary from state to state.

Rotate
32
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING: When using outdoor use portable lighting products, basic safety precautions
should always be followed to reduce the risk of re, electric shock, and personal injury
including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
a) Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet to
be used for the outdoor use exible lighting product. Receptacles are available that have built-in
GFCI protection for this measure of safety.
b) Only use outdoor extension cords such as type SEW, SEOW, SEOOW, SOW, SOOW, STW,
STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or SJTOOW.
This designation is marked on the wire of the extension cord.
• Read and follow all instructions that are on the product or provided with the product.
• This product operates at 120V, 60Hz 9W per string
• This seasonal use product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, replaces, candles, or other similar
sources of heat.
• Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the vicinity of the product or when left unattended.
• This is an electric product and is not a toy! To avoid risk of re, burns, personal injury, and electric
shock, it should not be played with or placed where small children can reach it.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire
insulation.
• Do not cover the product with cloth, paper, or any material not part of the product when in use.
• This product is equipped with push-in type lamps. Do not twist lamps.
• Do not operate this product with lamps missing from sockets. Missing lamps should be
replaced promptly.
• Risk of re: This product does not contain lamp shunts which allow the product to operate if one
lamp burns out. Replace lamps only with the spare lamps provided with this product.
• DO NOT EXCEED THE MAXIMUM EXTENSION LENGTH IN FEET PERMITTED BY THE
MARKING. The maximum extension length for this string light is 144 feet or 4 units. When adding
additional extension pieces, use only PATRIOT LIGHTING®346-1102 36FT LED RGB String Light.
SAVE THESE INSTRUCTIONS
Before beginning assembly, installation, or operation of product, make sure all parts are present. Compare
parts with package and hardware contents lists on page 1. If any part is missing or damaged, do not attempt
to assemble, install or operate the product. Contact customer service for replacement parts.
Tools Required for Assembly (not included): Phillips Screwdriver, Safety Glasses, Ladder, Supporting hard-
ware (eyebolts or brackets)
Estimated assembly time: 20 minutes
WARNING
• Disconnect power at the source prior to beginning installation or servicing product.
• Be careful not to damage or cut the wire insulation (covering) during xture installation. Do not permit power
cord or wires to contact any surface having a sharp edge. To do so may damage or cut the wire insulation,
which could cause serious injury or death from electric shock.
• String light sockets must be suspended so that lamps are facing downwards. DO NOT mount the light string
with sockets facing upward. Lamps should hang freely with at least 3 inches of space from nearest object.
SAFETY INFORMATION
PREPARATION
INSTALLATION INSTRUCTIONS
1. Carefully remove all the parts
from the packaging, and gently lay
them out on a smooth workspace.
Remove the packing material and
uncoil the string light (A). Be careful
not to cut or nick the string nor
damage the pre-attached lamps.
15
6
7
AAA
2. Ensure all 18 of the pre-attached
lamps are securely a󰀩xed to each
of the string light’s (A) sockets
by gently turning each lamp (C)
clockwise. Do not over-turn.
3. Connect the 24V plug-in power
supply with adaptor (B) to the light
string (A) by pushing the male and
female end connections together,
then tightening the screw-on
connection cover.
2
2
3
AAA
AAA
AAA
AAA
B
B
4
4. Securely attach string light
(A) to a support structure using
the eyelet holes at the top of
each suspended socket and
appropriate supporting hardware
(eyebolts, brackets, etc. not
included).
5. Plug the 24V plug-in power
supply with adapter (B) to an
appropriate power outlet.
6. Use handheld remote
control (B) for on/o󰀨 control
and color control. Remove
plastic tab from battery door
before use. Use control on
adaptor (B) for on/o󰀨 control
and color control.
7. To replace remote control’s
battery (D), follow directions
on the back of remote control
(D) to slide battery drawer out.
Replace battery (+ side up)
and slide battery drawers back
in place.
1. Ensure that all string lights
(A) are unplugged before adding
additional string light (A) segments
to the series.
2. Remove the end cap from the
last string light (A) in the series by
unscrewing the plastic end cap.
1
3. Connect two string lights
together by pushing the male and
female end connections together,
then tightening the screw-on
connection cover. Ensure the new
last string in the series still has its
end cap attached.
3
EXTENDING THE SERIES
AAA
B
B
B
C
C
D
D
ON
SPEED
+
JUMP7 FADE7
OFF
w
JUMP1 FADE1 SPEED
-
AUTO
WW
ON
SPEED
+
JUMP7 FADE7
OFF
w
JUMP1 FADE1 SPEED
-
AUTO
WW