PAX A77 User manual

5
PAX TECHNOLOGY INC.
A77 Smart Mini POS Terminal
PAX TECHNOLOGY INC.
Quick Setup Guide
Note: Product images shown may be dierent than actual
product recieved.
This document is provided to you for informaonal purposes only. All features
and specicaons are subject to change without noce. PAX’s name and PAX’s
logo are registered trademarks of PAX Technology Inc. All Rights Reserved.
Responsible Party:
PAX Technology Inc.
8880 Freedom Crossing Trail,
Building 400, 3rd Floor, Suite 300
Jacksonville, FL 32256, USA
Help Desk: 877-859-0099
www.pax.us
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operaon is subject
to the following two condions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operaon.
FCC WARNING
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the body of this equipment is
a label that contains, among other informaon, a product idener. If
requested, this number must be provided to the telephone company.
RF Exposure Informaon
This device meets the government’s requirement for exposure to radio
waves. This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the
Federal Communicaons Commission of the U.S. Government.
PAX Customer Support
For quesons or help with the terminal installaon please contact your
service provider or PAX customer support.
Technical Support Contact Informaon:
Phone: [phone]
Email: [email protected]
URL: www.pax.us
Cleaning the Device
8
• Do not use industrial strength or abrasive cleaner as it
may damage or scratch the screen.
• Do not immerse the device in water or liquid.
• Do not spray water or cleaner into EMV Card Reader or
ports.
• To clean the screen, apply dislled water or mild glass
cleaner onto a so, lint-free cloth and gently wipe
terminal.
1. If any cables become damaged, seek a replacement.
2. Do not insert unknown materials into any port on the A77;
this may cause serious damage.
3. If repairs are required, please contact a professional techni-
cian instead of aempng them on your own.
4. Avoid exposing the device to an excessively hot, dusty, or
strong electromagnec envrionment.
5. Do not vibrate, shake, or drop the device.
Cauon: Changes or modicaons not expressly approved by
the party responsible for compliance could void the user’s authority
to operate the equipment.
Installaon and Usage Tips
9
6

PAX TECHNOLOGY INC. PAX TECHNOLOGY INC.
Contents Checklist
Contents Qty.
A77 Smart Mini Payment Terminal 1
AC Power Adapter 1
USB Cable 1
Baery 1
Quick Setup Guide 1
1Please check the components aer unpacking. If any of
the components are missing, please contact the dealer.
Product Descripon
2
Power
4
Card Readers
3
SAM, SIM, & Micro SD Card
6
Environment
7
Working Environment
• Temperature:
-10°C ~ 50°C (14°F ~ 122°F)
•Humidity:
5% ~ 96% (without condensaon)
• Magnec Stripe Card: Slide the card through the card reader slot from
le to right or from right to le with the magnec strip oriented to-
wards the body of the device. Make sure that the card is fully inserted
into the card reader while swiping the card.
• Smart Card Reader: Insert the card fully into the reader with the
metallic contacts facing up and towards the device. Make sure that the
card is fully inserted into the card reader while scanning the card.
• Contactless Card Reader: The contactless card reader reads cards
and devices placed roughly within an inch (2.5 mm). For best results,
place as close to the reader as possible and center the card over the
indicated area.
1. Remove the back cover.
2. Gently remove the baery from the device.
3. Insert the card into the relevant card slot.
4. Replace the baery and back cover.
POWER ON:
Press and hold the power buon down for 3-5 seconds and then
release.
POWER OFF:
Press and hold the power buon down for 3 to 5 seconds and
then release.
4321
5
• Do not use or place the baery in direct sunlight and/or smokey, dusty
environments.
• Do not strike, squeeze, and/or tread on baery.
• Do not throw the baery in any liquids or place in/near res.
• If the baery is deformed or damaged, please stop using immediately
and replace it.
• If the connuous working me is only half of a new baery, the
baery life may be at its end. Please replace it.
• The specied baery model and charger must be used, otherwise
there may be an explosion.
Lithium Ion Baery
• The charging me cannot exceed 24 hours. If the baery is
out of power, please recharge in an appropriate me and then
disconnect the device. Avoid damaging the baery with over-charge
and over-discharge.
• Please recharge the baery at least once every 6 months to avoid
shortening its life.
• Replace baery every two years.
• Be sure to follow the instrucons to dispose of wasted baeries.
EMV Reader
Power Buon
Front Facing Camera
LCD Screen
Contactless Card Reader
Scanner Buon
Light Sensor and Camera
POGO PIN
Back Cover
MSR
Power Buon
MSR
Scanner Buon
Note: Product images shown may be dierent than actual
product recieved.
Power Buon
Audio Jack
Volume +/-
Cover Notch
USB Type-C Port
Barcode Scanner
Barcode Scanner
USB Type-C Port Audio Jack
Volume +/-
Smart Card Reader
POGO Pin

PAX TECHNOLOGY INC. PAX TECHNOLOGY INC.
Contents Checklist
Contents Qty.
A77 Smart Mini Payment Terminal 1
AC Power Adapter 1
USB Cable 1
Baery 1
Quick Setup Guide 1
1Please check the components aer unpacking. If any of
the components are missing, please contact the dealer.
Product Descripon
2
Power
4
Card Readers
3
SAM, SIM, & Micro SD Card
6
Environment
7
Working Environment
• Temperature:
-10°C ~ 50°C (14°F ~ 122°F)
•Humidity:
5% ~ 96% (without condensaon)
• Magnec Stripe Card: Slide the card through the card reader slot from
le to right or from right to le with the magnec strip oriented to-
wards the body of the device. Make sure that the card is fully inserted
into the card reader while swiping the card.
• Smart Card Reader: Insert the card fully into the reader with the
metallic contacts facing up and towards the device. Make sure that the
card is fully inserted into the card reader while scanning the card.
• Contactless Card Reader: The contactless card reader reads cards
and devices placed roughly within an inch (2.5 mm). For best results,
place as close to the reader as possible and center the card over the
indicated area.
1. Remove the back cover.
2. Gently remove the baery from the device.
3. Insert the card into the relevant card slot.
4. Replace the baery and back cover.
POWER ON:
Press and hold the power buon down for 3-5 seconds and then
release.
POWER OFF:
Press and hold the power buon down for 3 to 5 seconds and
then release.
4321
5
• Do not use or place the baery in direct sunlight and/or smokey, dusty
environments.
• Do not strike, squeeze, and/or tread on baery.
• Do not throw the baery in any liquids or place in/near res.
• If the baery is deformed or damaged, please stop using immediately
and replace it.
• If the connuous working me is only half of a new baery, the
baery life may be at its end. Please replace it.
• The specied baery model and charger must be used, otherwise
there may be an explosion.
Lithium Ion Baery
• The charging me cannot exceed 24 hours. If the baery is
out of power, please recharge in an appropriate me and then
disconnect the device. Avoid damaging the baery with over-charge
and over-discharge.
• Please recharge the baery at least once every 6 months to avoid
shortening its life.
• Replace baery every two years.
• Be sure to follow the instrucons to dispose of wasted baeries.
EMV Reader
Power Buon
Front Facing Camera
LCD Screen
Contactless Card Reader
Scanner Buon
Light Sensor and Camera
POGO PIN
Back Cover
MSR
Power Buon
MSR
Scanner Buon
Note: Product images shown may be dierent than actual
product recieved.
Power Buon
Audio Jack
Volume +/-
Cover Notch
USB Type-C Port
Barcode Scanner
Barcode Scanner
USB Type-C Port Audio Jack
Volume +/-
Smart Card Reader
POGO Pin

PAX TECHNOLOGY INC. PAX TECHNOLOGY INC.
Contents Checklist
Contents Qty.
A77 Smart Mini Payment Terminal 1
AC Power Adapter 1
USB Cable 1
Baery 1
Quick Setup Guide 1
1Please check the components aer unpacking. If any of
the components are missing, please contact the dealer.
Product Descripon
2
Power
4
Card Readers
3
SAM, SIM, & Micro SD Card
6
Environment
7
Working Environment
• Temperature:
-10°C ~ 50°C (14°F ~ 122°F)
•Humidity:
5% ~ 96% (without condensaon)
• Magnec Stripe Card: Slide the card through the card reader slot from
le to right or from right to le with the magnec strip oriented to-
wards the body of the device. Make sure that the card is fully inserted
into the card reader while swiping the card.
• Smart Card Reader: Insert the card fully into the reader with the
metallic contacts facing up and towards the device. Make sure that the
card is fully inserted into the card reader while scanning the card.
• Contactless Card Reader: The contactless card reader reads cards
and devices placed roughly within an inch (2.5 mm). For best results,
place as close to the reader as possible and center the card over the
indicated area.
1. Remove the back cover.
2. Gently remove the baery from the device.
3. Insert the card into the relevant card slot.
4. Replace the baery and back cover.
POWER ON:
Press and hold the power buon down for 3-5 seconds and then
release.
POWER OFF:
Press and hold the power buon down for 3 to 5 seconds and
then release.
4321
5
• Do not use or place the baery in direct sunlight and/or smokey, dusty
environments.
• Do not strike, squeeze, and/or tread on baery.
• Do not throw the baery in any liquids or place in/near res.
• If the baery is deformed or damaged, please stop using immediately
and replace it.
• If the connuous working me is only half of a new baery, the
baery life may be at its end. Please replace it.
• The specied baery model and charger must be used, otherwise
there may be an explosion.
Lithium Ion Baery
• The charging me cannot exceed 24 hours. If the baery is
out of power, please recharge in an appropriate me and then
disconnect the device. Avoid damaging the baery with over-charge
and over-discharge.
• Please recharge the baery at least once every 6 months to avoid
shortening its life.
• Replace baery every two years.
• Be sure to follow the instrucons to dispose of wasted baeries.
EMV Reader
Power Buon
Front Facing Camera
LCD Screen
Contactless Card Reader
Scanner Buon
Light Sensor and Camera
POGO PIN
Back Cover
MSR
Power Buon
MSR
Scanner Buon
Note: Product images shown may be dierent than actual
product recieved.
Power Buon
Audio Jack
Volume +/-
Cover Notch
USB Type-C Port
Barcode Scanner
Barcode Scanner
USB Type-C Port Audio Jack
Volume +/-
Smart Card Reader
POGO Pin

PAX TECHNOLOGY INC. PAX TECHNOLOGY INC.
Contents Checklist
Contents Qty.
A77 Smart Mini Payment Terminal 1
AC Power Adapter 1
USB Cable 1
Baery 1
Quick Setup Guide 1
1Please check the components aer unpacking. If any of
the components are missing, please contact the dealer.
Product Descripon
2
Power
4
Card Readers
3
SAM, SIM, & Micro SD Card
6
Environment
7
Working Environment
• Temperature:
-10°C ~ 50°C (14°F ~ 122°F)
•Humidity:
5% ~ 96% (without condensaon)
• Magnec Stripe Card: Slide the card through the card reader slot from
le to right or from right to le with the magnec strip oriented to-
wards the body of the device. Make sure that the card is fully inserted
into the card reader while swiping the card.
• Smart Card Reader: Insert the card fully into the reader with the
metallic contacts facing up and towards the device. Make sure that the
card is fully inserted into the card reader while scanning the card.
• Contactless Card Reader: The contactless card reader reads cards
and devices placed roughly within an inch (2.5 mm). For best results,
place as close to the reader as possible and center the card over the
indicated area.
1. Remove the back cover.
2. Gently remove the baery from the device.
3. Insert the card into the relevant card slot.
4. Replace the baery and back cover.
POWER ON:
Press and hold the power buon down for 3-5 seconds and then
release.
POWER OFF:
Press and hold the power buon down for 3 to 5 seconds and
then release.
4321
5
• Do not use or place the baery in direct sunlight and/or smokey, dusty
environments.
• Do not strike, squeeze, and/or tread on baery.
• Do not throw the baery in any liquids or place in/near res.
• If the baery is deformed or damaged, please stop using immediately
and replace it.
• If the connuous working me is only half of a new baery, the
baery life may be at its end. Please replace it.
• The specied baery model and charger must be used, otherwise
there may be an explosion.
Lithium Ion Baery
• The charging me cannot exceed 24 hours. If the baery is
out of power, please recharge in an appropriate me and then
disconnect the device. Avoid damaging the baery with over-charge
and over-discharge.
• Please recharge the baery at least once every 6 months to avoid
shortening its life.
• Replace baery every two years.
• Be sure to follow the instrucons to dispose of wasted baeries.
EMV Reader
Power Buon
Front Facing Camera
LCD Screen
Contactless Card Reader
Scanner Buon
Light Sensor and Camera
POGO PIN
Back Cover
MSR
Power Buon
MSR
Scanner Buon
Note: Product images shown may be dierent than actual
product recieved.
Power Buon
Audio Jack
Volume +/-
Cover Notch
USB Type-C Port
Barcode Scanner
Barcode Scanner
USB Type-C Port Audio Jack
Volume +/-
Smart Card Reader
POGO Pin

5
PAX TECHNOLOGY INC.
A77 Smart Mini POS Terminal
PAX TECHNOLOGY INC.
Quick Setup Guide
Note: Product images shown may be dierent than actual
product recieved.
This document is provided to you for informaonal purposes only. All features
and specicaons are subject to change without noce. PAX’s name and PAX’s
logo are registered trademarks of PAX Technology Inc. All Rights Reserved.
Responsible Party:
PAX Technology Inc.
8880 Freedom Crossing Trail,
Building 400, 3rd Floor, Suite 300
Jacksonville, FL 32256, USA
Help Desk: 877-859-0099
www.pax.us
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operaon is subject
to the following two condions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operaon.
FCC WARNING
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the body of this equipment is
a label that contains, among other informaon, a product idener. If
requested, this number must be provided to the telephone company.
RF Exposure Informaon
This device meets the government’s requirement for exposure to radio
waves. This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the
Federal Communicaons Commission of the U.S. Government.
PAX Customer Support
For quesons or help with the terminal installaon please contact your
service provider or PAX customer support.
Technical Support Contact Informaon:
Phone: [phone]
Email: [e-mail]
URL: www.pax.us
Cleaning the Device
8
• Do not use industrial strength or abrasive cleaner as it
may damage or scratch the screen.
• Do not immerse the device in water or liquid.
• Do not spray water or cleaner into EMV Card Reader or
ports.
• To clean the screen, apply dislled water or mild glass
cleaner onto a so, lint-free cloth and gently wipe
terminal.
1. If any cables become damaged, seek a replacement.
2. Do not insert unknown materials into any port on the A77;
this may cause serious damage.
3. If repairs are required, please contact a professional techni-
cian instead of aempng them on your own.
4. Avoid exposing the device to an excessively hot, dusty, or
strong electromagnec envrionment.
5. Do not vibrate, shake, or drop the device.
Cauon: Changes or modicaons not expressly approved by
the party responsible for compliance could void the user’s authority
to operate the equipment.
Installaon and Usage Tips
9
6

5
PAX TECHNOLOGY INC.
A77 Smart Mini POS Terminal
PAX TECHNOLOGY INC.
Quick Setup Guide
Note: Product images shown may be dierent than actual
product recieved.
This document is provided to you for informaonal purposes only. All features
and specicaons are subject to change without noce. PAX’s name and PAX’s
logo are registered trademarks of PAX Technology Inc. All Rights Reserved.
Responsible Party:
PAX Technology Inc.
8880 Freedom Crossing Trail,
Building 400, 3rd Floor, Suite 300
Jacksonville, FL 32256, USA
Help Desk: 877-859-0099
www.pax.us
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operaon is subject
to the following two condions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operaon.
FCC WARNING
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the body of this equipment is
a label that contains, among other informaon, a product idener. If
requested, this number must be provided to the telephone company.
RF Exposure Informaon
This device meets the government’s requirement for exposure to radio
waves. This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the
Federal Communicaons Commission of the U.S. Government.
PAX Customer Support
For quesons or help with the terminal installaon please contact your
service provider or PAX customer support.
Technical Support Contact Informaon:
Phone: [phone]
Email: [email protected]
URL: www.pax.us
Cleaning the Device
8
• Do not use industrial strength or abrasive cleaner as it
may damage or scratch the screen.
• Do not immerse the device in water or liquid.
• Do not spray water or cleaner into EMV Card Reader or
ports.
• To clean the screen, apply dislled water or mild glass
cleaner onto a so, lint-free cloth and gently wipe
terminal.
1. If any cables become damaged, seek a replacement.
2. Do not insert unknown materials into any port on the A77;
this may cause serious damage.
3. If repairs are required, please contact a professional techni-
cian instead of aempng them on your own.
4. Avoid exposing the device to an excessively hot, dusty, or
strong electromagnec envrionment.
5. Do not vibrate, shake, or drop the device.
Cauon: Changes or modicaons not expressly approved by
the party responsible for compliance could void the user’s authority
to operate the equipment.
Installaon and Usage Tips
9
6

5
PAX TECHNOLOGY INC.
A77 Smart Mini POS Terminal
PAX TECHNOLOGY INC.
Quick Setup Guide
Note: Product images shown may be dierent than actual
product recieved.
This document is provided to you for informaonal purposes only. All features
and specicaons are subject to change without noce. PAX’s name and PAX’s
logo are registered trademarks of PAX Technology Inc. All Rights Reserved.
Responsible Party:
PAX Technology Inc.
8880 Freedom Crossing Trail,
Building 400, 3rd Floor, Suite 300
Jacksonville, FL 32256, USA
Help Desk: 877-859-0099
www.pax.us
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operaon is subject
to the following two condions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operaon.
FCC WARNING
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the body of this equipment is
a label that contains, among other informaon, a product idener. If
requested, this number must be provided to the telephone company.
RF Exposure Informaon
This device meets the government’s requirement for exposure to radio
waves. This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the
Federal Communicaons Commission of the U.S. Government.
PAX Customer Support
For quesons or help with the terminal installaon please contact your
service provider or PAX customer support.
Technical Support Contact Informaon:
Phone: [phone]
Email: [e-mail]
URL: www.pax.us
Cleaning the Device
8
• Do not use industrial strength or abrasive cleaner as it
may damage or scratch the screen.
• Do not immerse the device in water or liquid.
• Do not spray water or cleaner into EMV Card Reader or
ports.
• To clean the screen, apply dislled water or mild glass
cleaner onto a so, lint-free cloth and gently wipe
terminal.
1. If any cables become damaged, seek a replacement.
2. Do not insert unknown materials into any port on the A77;
this may cause serious damage.
3. If repairs are required, please contact a professional techni-
cian instead of aempng them on your own.
4. Avoid exposing the device to an excessively hot, dusty, or
strong electromagnec envrionment.
5. Do not vibrate, shake, or drop the device.
Cauon: Changes or modicaons not expressly approved by
the party responsible for compliance could void the user’s authority
to operate the equipment.
Installaon and Usage Tips
9
6