PAX A80 User manual

NCRP2PE_PAXA80QRGNew_08252020
PAX A80
Quick Reference Guide

Terminal Display Action
Select DEBIT followed by the
Sale Icon
Input the amount of the transaction either on the screen or
keyboard. Press CONFIRM or [ENTER].
Swipe Card Swipe the card.
ENTER PIN Input PIN number and press [ENTER].
Debit Sale
Terminal Display Action
Select The Return Icon Input the amount of the transaction either on the screen or
keyboard. Press CONFIRM or [ENTER].
Insert/Tap/Swipe Card Insert, Tap, or Swipe the card.
Credit Return
Terminal Display Action
Select The V/Sale Icon Input the Original Transaction Number either on the screen
or keyboard. Press Conrm or [ENTER].
TRANSACTION DETAIL Validate the transaction detail to be voided. Move the
screen up with your nger to display CONFIRM. Press
CONFIRM to void the transaction.
AMOUNT: X.XX Conrm transaction to void by pressing [ENTER].
Credit Void Sale
PAX A80 Quick Reference Guide
Retail
Terminal Display Action
Select Sale Icon Input the amount of the transaction either on the screen or
keyboard. Press CONFIRM or [ENTER].
Insert/Tap/Swipe Card Insert, Tap, or Swipe the card.
Credit Sale
Terminal Display Action
Select DEBIT followed by the
V/Sale Icon
Input the Original Transaction Number either on the screen
or keyboard. Press CONFIRM or [ENTER].
TRANSACTION DETAIL Validate the transaction detail to be voided. Move the
screen up with your nger to display CONFIRM. Press
CONFIRM to void the transaction.
Debit Void Sale
Batch Settlement
Terminal Display Action
Select FUNC followed by the
Batch Icon
Select Batch Close.
Note: If multi MID/TID, rst select the display name that will be used for this transaction.

Retail PAX A80 Quick Reference Guide
Retail
Setup or Technical Support Questions?
Print Batch Report
Change Default Report
Re-Print Receipt
Terminal Display Action
Select FUNC Select Re-Print
Print Last, Print Detail
or Print Any
Select which receipt type required.
Note: When Print Any the terminal requests more input.
ENTER Trans No and
Receipt Type
Input transaction number and receipt type, Customer or
Merchant. Press PRINTING.
Terminal Display Action
Select FUNC Select Reports.
Default – Current –
History – EMV
Select Default Report.
Terminal Display Action
Select FUNC Select Reports.
Default – Current – History
- EMV
Select Current Report.
Select Report Type • Condensed Report
• Short Report
• Journal Report
• Totals Only Report
Select Payment Type • All
• Credit
• Debit
Select Card Type • All
• Visa
• MasterCard
• AMEX
• Etc
Select Trans Type • All
• Sale
• Rturn
• V/Sale
• V/Rtrn
• Etc
Select Sorted by • By Trans No.
• By Card Type
Select PRINTING
Default Report Select Cancel or OK
1-855-226-7337
https://www.illinoistreasurer.gov/Local_Governments/ePAY_Overview

NCRP2PE_PAXSA80QRGNew_11062019
Connecting your terminal:
A80 POS power cord Ethernet cable
Point to Point Encryption (P2PE)
Immediate data encryption keeping your clients data secure.
Note: Before proceeding, please ensure your A80 packaging has not been tampered with.
Technical Requirements:
• Standard 110 volt power outlet
• An ethernet switch port for each device
• A xed IP address on your internal network that is reachable from the
workstation that will be used for payment processing
What’s included:
1. Verify your bag number in your ePAY portal https://epay.jtpyportal.com to
ensure you have received the correct terminal. For more information on where to
conrm your bag number, please refer to page 9 on our P2PE Instruction Manual
(PIM), which can be found at: https://payments.ncr.com/pim/.
2. Complete one of the following
depending on how you connect
to the internet:
• Connect the ethernet
cable to the ‘LAN’ port.
• Connect the line cable
into the ‘LINE’ port.
3. Plug the power cable into
the POWER Port.
A80 Wi Setup :
1. Select settings.
2. Input the default Android Settings password (9876).
3. Use the slide button on the right to enable Wi-Fi.
4. Turn on the Local Wi-Fi option. Only local Wi-Fi networks that have the SSID enabled
will be visible. To view or edit the network settings select the desired network.
5. After selecting the desired Wi-Fi network, input the Wi-Fi case sensitive password
and connect.