PAX E700Mini User manual

E700Mini Integrate Smart Terminal
Note: Product images shown may be different than actual product received
PAX TECHNOLOGY LIMITED

1. Contents Checklist
Please check the components after unpacking. If any are missing, please contact the
dealer.
Part
Qty
E700 Mini
1
AC Power Adapter
1
AC Power Cable
1
Thermal Paper Roll
1
Quick Setup Guide
1
2. Product Description
Front View

3. Terminal Ports
The following ports are accessible on the back of the E700 Mini:
• Power – Connect AC power supply to E700 Mini
• Cash Drawer – Insert the cable from cash drawer to connect with cashregister
• Audio Jack – Allows hearing impaired to connect assistive listeningdevice
• USB Host – Connect USB device
• Series – Used to connect to serial device such an external POS device
• USB-Slave –Connected to PC for local terminal download
• LAN – Used for bi-directional Ethernet connections
Open the back cover to access following ports:
•microSD Card Slot –Open card cover, insert card into microSD card slot
4. Power ON/OFF
Power on: Press and hold the Power button for three seconds until the main screen
displays normally. (See page 2 for the location of the Power button.
Power off: Press and hold the Power button for three seconds until the shutdown
menu displays. Select Power off. The terminal turns off after a few seconds. (See
page 2 for the location of the Power button.)
5. Specifications
Operation System: Android 10.0
CPU: Quad-core Cortex™-A53,1.8GHz
Memory: 2GB DDR+16GB eMMC
Main Display: 10.1 inch, 1280x800 resolution, capacitive touch screen

Printer: 3" high-speed thermal printer with auto-cutter, printingspeed 150mm/s, paper
width 80mm, diameter 50mm
Audio: Built-in speaker, support headphone output
L-Sensor (Ambient Light Sensor): Automatically adjusts the back light brightness of
the main display.
Wireless Communication: Supports LAN, Wi-Fi®, Bluetooth® Low Energy ,
3G/4G
Peripheral Ports: Power port x 1
USB A ports x 3
USB port x 1
LAN x 1
Cash drawer x 1
Serial port x 1
Audio jack x 1
Card Slot: SIM card slot x 2, unused port
microSD card slot x 1
6. Load Printer Paper
1. When the printer is out of paper, Press the button on the left of printer to open the
cover.
2. Load the paper roll into the paper compartment and extend the end of the paper out
of the printer.
3. Close printer cover. The Paper Out indicator light turns off.

7. Installation and Usage Tips
•Avoid exposing the device to an excessively hot, humid, dusty, or strong
electromagnetic environment.
•Do not vibrate, shake, or drop the device.
• Do not plug or unplug any part of the device while it is powered on.
This may cause damage to an internal circuit.
• Please contact PAX technical support for assistance with the device.
Caution: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment. In a domestic
environment, this product may cause radio interference in which case the user may be
required to take adequate measures.
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-- Consult the dealer or an experienced radio/TV technician for help.
ISED compliance statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
The user manual for LE-LAN devices shall contain instructions related to the restrictions
mentioned in the above sections, namely that:
i. the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems;
i. le dispositif utilisédans la bande 5150-5250 MHz est réservéàune utilisation en intérieur
afin de réduire le risque de brouillage préjudiciable aux systèmes mobiles par satellite
dans le même canal;
Radiation Exposure statement
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 20 cm between the radiator and your body.
Cet équipement est conforme aux limites d'exposition aux radiations FCC/IC CNR-102 établies
pour un environnement non contrôlé. Cet équipement doit être installéet utiliséavec une distance
minimale de 20 cm entre le radiateur et votre corps.
PAX TECHNOLOGY LIMITED reserves the right to change product
technology specifications without notifying.
PAX TECHNOLOGY LIMITED
Manufacturer: PAX Computer Technology (Shenzhen) Co.,Ltd.
Address:4/F, No.3 Building, Software Park, Second Central Science-Tech Road,

High-Tech Industrial Park, Shenzhen, Guangdong, P.R.C.
Tel: [phone] Fax: [phone]
Website: http://www.pax.com.cn
Responsible Party:PAX Technology, Inc.
8880 Freedom Crossing Trail, Building 400, 3rd Floor Suite 300, Jacksonville , Florida,
32256
Help-desk
1 877-859-0099