PDQ 6300 User manual

1
6300 Wide Device 6C03 – Cylinder Only
Installation Instruction Phone: 833-2-PDQTEC | www.pdqlocks.com
639420 Rev0 – 06/13/22
1. SIZE CYLINDER TAILPIECE
 Cut cylinder/housing tailpiece to extend
5/16" past inside door face when
installed.
2. SHORTEN SCREWS
 Locate screws included with Rim Cylinder /
Housing
 Shorten at appropriate machined break-off
length for door thickness
3. ATTACH CYLINDER TO DOOR
 Attach cylinder to door with mounting plate
as shown. Be careful not to over tighten
mounting plate screws.
 Continue exit device installation as shown in
device instruction.
5/16"
Cylinder Oriented
Vertically

2
6400 Narrow Device 6C03 – Cylinder Only
Installation Instruction Phone: 833-2-PDQTEC | www.pdqlocks.com
639420 Rev0 – 06/13/22
1. SIZE CYLINDER TAILPIECE
 Cut cylinder/housing tailpiece to extend
5/16" past inside door face when
installed.
2. SHORTEN SCREWS
 Locate screws included with Rim Cylinder /
Housing
 Shorten at appropriate machined break-off
length for door thickness
3. ATTACH CYLINDER TO
DOOR
 Attach cylinder to door with mounting
plate as shown. Be careful not to over
tighten mounting plate screws.
 Continue exit device installation as
shown in device instruction.
5/16"
Cylinder Oriented
Horizontally