PDQ KMS User manual

KMS INSTALLATION INSTRUCTION
PASSIVEBOLT POWERED DEADBOLT
4.INSTALLGASKET&INSIDE
MOUNTINGPLATE
• Install rubber gasket and inside mounting
plate and secure with (2) pan head
screws.
2.INSTALLCYLINDER
ASSEMBLY
• Install deadbolt assembly from outside of
door.
• Retract deadbolt -
Left Hand Door – Rotate tailpiece
clockwise until it stops in the vertical
orientation.
Right Hand Door – Rotate tailpiece
counter-clockwise until it stops in the
vertical orientation.
PB-9705 Rev0 – 12-1-22
2. INSTALLLATCH
• Install latch with cross slot for tailpiece
toward bottom.
• Secure with (2) #8 x ¾” combo screws.
For Mechanical Concerns:
Phone: [phone]
www.pdqlocks.com
For Mechanical Concerns:
Phone: [phone]
www.pdqlocks.com
1.PREPAREDOOR&
INSTALLREADERASSEMBLY
• Prepare door according to template.
• Install reader assembly
• Route wires through door - Do not pinch wires
• Install mounting plate
• Secure with (2) flat head screws.
READER
ASSEMBLY
MOUNTING
PLATE
READER
ASSEMBLY
MOUNTING
PLATE
READER
ASSEMBLY
MOUNTING
PLATE
For Electrical Concerns:
Email: [email protected]
www.PassiveBolt.com
For Electrical Concerns:
Email: [email protected]
www.PassiveBolt.com

KMS INSTALLATION INSTRUCTION
PB-9705 Rev0 – 12-1-22
5.INSTALLINSIDETRIMAND
BATTERIES
▪ Make reader connection
▪ Secure escutcheon with (2) short pan
head screws.
▪ Install batteries and battery cover with
pan head screw.
BATTERY
COVER
BATTERIES
CHASSIS READER