Perlesmith PSFS01 User manual

Thank you for choosing our product! We strive to provide the best
quality and services for our customers. Would you kindly share your
experience on Amazon if you are satisfied? Should you have any
issues, please don't hesitate to contact us.
Telephone：[phone] Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)
PSFS01
Installation Instruction
V1.0

Supplied Parts List
Wire Clip
1
TV Plate
(x1)
1
Support Pillar Tempered Glass Monitor Bracket Plastic Socket
(x1)
2(x1) 3 4 (x2) (x1) 5
M8x35 Bolt M6x60 Bolt
(x3)
A(x4) B
M8X22X2
(x3)
C
M8X22X2
(x3)
D
Metal Pad
Safety Lock
Rubber Pad
(x2)
E
(x6)
F(x2) G(x1) H(x1) I(x4)
J
M6x16 Bolt M6x30 Bolt M8x16 Bolt
(x4) (x4)(x4)
TV4TV2
M6x50 Bolt
(x4)
TV3TV1M8x45 Bolt
(x4)
TV5
M8x65 Bolt
(x4)
TV6
SP1 SP2
(x8)
TV7 (x8) TV8
Spacer with 3 holes
(x4)
TV9
Allen Key Allen Key
Steel Washer
Plastic Washer
WARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE
CAN RESULT FROM IMPROPER INSTALLATION OR ASSEMBLY.
READ FOLLOWING WARNINGS BEFORE BEGINNING.
•If you do not understand the instructions or have any concerns or questions,
please contact customer service at [email protected]
•Do not install or assemble if the product or hardware is damaged or missing.
•Not all parts and hardware included will be used. lf you require replacement
parts, contact customer service at [email protected]
•This product may contain moving parts. Use with caution.
•Please check www.perlesmith.com for more products and company
information.
IMPORTANT SAFETY INFORMATION

Plastic Socket
Tempered Glass
(Painting Side)
3
5
Rubber Pad
HAllen Key
F
Connecting the Support Pillar to Tempered Glass
Step 1
Connecting the TV Plate to Support Pillar
Step 2
Support Pillar
2
C
D
A
1.1
1.2
TV Plate1
M6x60 Bolt
B
Metal PadE
IAllen Key
2
1
two choices for height
adjustment for the wall plate

J
Step 3
Wire Clip
3
2
Measure VESA and Check TV screws
Check TV screws
When attaching brackets to the flat
screen, be careful not to over tighten
screws and be sure that screws do
not bottom out in the mounting
holes.
Too Short Too Long
Correct Correct
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M6, or M8) to use.
Measure the distance between
the holes located at the back of
your TV (these measures may
form the shape of a square, or a
rectan-gle) and check that these
taken measures are within the
VESA(*) range for this wall
mount.(*) VESA: International
standard established by the TV
manufacturers used to determine
if LCD/LED TVs are compatible
with wall mounts.

Attaching TV to TV Plate and Managing the Wires
Step 5
4
JWire Clip
Safety Lock
G
FLAT BACK TV
(UNIVERSAL MONITOR PLATE)
screwdriver(Not included)
ROUND BACK TV
(UNIVERSAL MONITOR PLATE)
First, make sure the diameter of the bolt(TV1-6) fits your TV. Then, please see the diagram above. You will need
to thread the bolt into the TV using the correct washer (TV9) and spacer (TV7 or TV8) if necessary with a
screwdriver(Not included). Please make sure the monitor brackets(4) are vertically centered and level with each
other.
TV9
4
4
Step 4 Mounting the Monitor Bracket to a TV
TV1,4
TV9
TV7,8
TV2,3,5,6

5
First choice Second choice Third choice
Height adjustable vertical bracket(4)
first choice
second choice
third choice
If you find your TV set is too close to the base, please take off the TV from the stand.
Then, change to the second choice or third choice to allow more space between TV and
the tempered glass base (3).
Adusting the Height of the TV
Step 6
Swivel Adustment