Perlesmith PSTM1 User manual

V1.0
Installation Instruction
Thank you for choosing our product! We strive to provide the
best quality and services for our customers. Would you kindly
share your experience on Amazon if you are satisfied? Should
you have any issues, please don't hesitate to contact us.
Telephone：[phone] Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)
PSTM1

•Carefully open the carton, remove contents and lay out on
cardbard or other protective surface to avoid damage.
•Check to assure that all components were received
undamaged. Do not use damaged or defective parts.lf you
require replacement parts, contact customer service at
[email protected].
•Carefully read all instructions before attempting
installation.
•Install and operate this product with care. Please read this
instruction before beginning the installation, and carefully
follow all instructions contained herein. Use proper tools
during installation.
•
If you do not understand the instructions or have any
concerns or questions, please contact customer service at
[email protected].
•Do not use this product for any purpose or in any
configuration not explicitly specified in this instruction. We
hereby disclaim any and all liability for injury or damage
arising from incorrect assembly, incorrect mounting, or
incorrect use of this product.
•This product is intended for indoor use only. Use of this
product outdoors could lead to product failure and personal
injury.
1
Important Safety Instructions

M4x30 (x4)
A
M6x15 (x4)
B
M6x30 (x4)
C
M8x15 (x4)
D
M8x45 (x4)
E
(x4)
F
08.5x18x5 (x8)
G
08.5x18x10 (x8)
H
2
Parts list
Hardware List
K (x2)
I (x1)
J (x1)
L(x3) M(x1)
N(x1)

3
STEP 1
STEP 2
Please:
Tighten the knob, lnsert the
bolt.
Please:
Tighten the knob.
CAUTION:MAKE SURE
DISTANCE BETWEEN EACH
FOOT MUST BE 600MM/23.6"
CAUTION:TO AVOID ANY
INJURIES,PLEASE TAKE OFF
TV SET BEFORE MAKING
HEIGHT ADJUSTMENT
J
23.6’’

4
STEP 3
F
A C E
B D
F
FLAT BACK TV
(UNIVERSAL MONITOR PLATE)
screwdriver(Not included)
K
ROUND BACK TV
(UNIVERSAL MONITOR PLATE)
First, make sure the diameter of the bolt(A-E) fits your TV. Then, please see the diag-
ram above. You will need to thread the bolt into the TV using the correct washer (F)
hole and spacer (G or H) if necessary with a screwdriver(Not included). Please make
sure the monitor brackets(K) are vertically centered and level with each other.
K
H/G

STEP 4 Attach the TV onto the Plate
M
N
5

6
STEP 5
Please tight the screw
L
CAUTION:TO AVOID ANY
INJURIES,PLEASE TAKE OFF TV SET
BEFORE MAKING HEIGHT ADJUSTMENT
Magic paste [L] used for
cable management

7
PRODUCT SPECIFICATIONS
1200mm
1900mm