Petsafe Happy Ride 62349 User manual

DOG SAFETY SEAT
Soon your pup will have the best seat in the car.
(Besides your lap.)

1
Attach the front and rear struts to the left and right walls of the safety seat
frame, matching the letters on the tabs and slots. The smooth sides should face
inward. Press up on each strut to lock it in place.

2
Fold the three-panel main seat section into a “U” shape and attach it to the left
and right walls, matching the letters on the tabs and slots. The smooth side
should face upward. Press down on the main seat section to lock it in place.

3
Set the plastic frame upside down. Open the zipper at the back corner of the
fabric cover and slide it over the bottom of the frame. The zipper should line up
with the corner of the frame marked “H”.

4
Continue pulling the cover over the frame until the rectangular bottom panel
of the cover lines up with the bottom of the frame.
Turn the safety seat right-side up.

5
Pull the cover up and over the edges of the safety seat and close the zipper. The
two seat belt slits in the cover should line up with the holes in the safety seat.

6
Insert the liner into the safety seat, lining up the slit in the liner with the back
of the safety seat. Fold the liner over the edges and press the hook and loop
fasteners together.

7
Pass the large loop of the seat belt tether (opposite the carabiner) down through
the slit in the liner and the frame. Place the reversible cushion in the safety seat.

8
Pass your vehicle’s seat belt through the slit at one side of the safety seat,
through the seat belt tether loop, through the slit on the opposite side of the
safety seat and buckle it.